• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.338-343
• /
• 2004

In Block Matching Algorithm (BMA), a search pattern has a very important affect on the search time and the output quality. In this paper, we propose the HDS( Half Diamond Search) pattern based on the cross center-biased distribution property of a motion vector. At lust, the 4 points in the above, below, left, and right around the search center is calculated to decide the point of the MBD (Minimum Block Distortion). And an above point of the MBD is checked to calculate the SAD. If the SAD is less than the previous MBD, this process is repeated. Otherwise, the left and right points of MBD are calculated to decide the points that have the MBD between two points. These processes are repeated to the predicted direction for motion estimation. Experiments show that the speedup improvement of the proposed algorithm can be up to 23% while maintaining similar image quality.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.1-6
• /
• 2018

Recently nano meter size pattern (sub-micro scale) can be machined mechanically using a diamond tool. Many studies have found a 'size effect' which referred to a specific cutting energy increase with the decrease in the uncut chip thickness at micro scale machining. A new analysis method was suggested in order to observe 'size effect' in nano scale machining and to verify the cause of the 'size effect' in this study. The diamond tool was indented to a vertical depth of 1,000nm depth in order to simplify the stress state and the normal force was measured continuously. The tip rounding was measured quantitatively by AFM. Based on the measurements and theoretical analysis, it was verified that the main cause of the 'size effect' in nano scale machining is geometrically necessary dislocations, one of the intrinsic material characteristics. st before tool failure.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.592-599
• /
• 2018

The purpose of this study is to investigate consumer needs, image sensibility and preference of bedding fabric according to size and spacing of dot pattern. 18 kinds of dot pattern fabrics were designed with different diameters(6, 8, 10cm) and distances(4, 7, 10cm) in regular arrangement of diamond figure. The subjects were 162 male and female university students. The data were analyzed by SPSS 24.0. Fabrics were assessed subjectively using a 5-point scale 17 consumer needs and 33 sensory descriptors. The most consumer's needs for bedding fabric was shown to be functionality of bedding including hygiene, touch, warmth, ease of washing and management, air permeability, and hygroscopicity. The other parameters of consumer's needs were shown to be physical property and design parameter. The results of analysis of the dimension of image sensibility for fabrics with different size and spacing of dots are derived from six factors including joyfulness, coziness, uniqueness, charm, femininity, and complexity. As a result of analysis of preference with fabric kinds, there was a significant difference in preference with fabrics. The preferred fabrics were characterized by the pattern and the base fabric being striking three-dimensionally with 1/3 twill and 3/1 twill fabric. Sensory descriptors related to joyful image and unique image were analyzed as evaluation terms that can distinguish the preferences of fabrics. Correlation analysis showed the fabrics are preferred as the difference in luminance and reflectance between the base and pattern of the fabric become larger and the spacing of patterns become closer.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.55-59
• /
• 2007

Technologies of super-precision micro pattern mold machining and high-performance optical films manufacturing using thereof forms the basis of recent display industries which have developed remarkably. Especially, it is the light guide plates and high luminous intensity prism sheets at BLU or FLU in LCD and lenses at virtual keyboard's display to be manufactured by micro machining technology. One way the industry requires to do that is by developing high-performance light guide plates or films which are existing light guide plates, diffusion films and luminance enhancement prism films all in one. In this research effort, basic processing of the micro pyramid structure by shaping method is proposed. Experiments of mold machining of pitch $20{\mu}m$ tetrahedral pyramid and pitch $100{\mu}m$ trihedral pyramid using a $90^{\circ}$ diamond tool were conducted to identify a variety of machining features, such as cutting forces, conditions of the surface, shapes of chips, and influence of materials.

• Transactions of Materials Processing
• /
• v.12 no.7
• /
• pp.640-646
• /
• 2003

The nanoprobe based on lithography, mainly represented by SPM based technologies, has been recognized as potential application to fabricate the surface nanostructures because of its operational versatility and simplicity. The objective of the work is to suggest new mastless pattern fabrication technique using the combination of machining by nanoindenter and KOH wet etching. The scratch option of the nanoindenter is a very promising method for obtaining nanometer scale features on a large size specimen because it has a very wide working area and load range. Sample line patterns were machined on a silicon surface, which has a native oxide on it, by constant load scratch (CLS) of the Nanoindenter with a Berkovich diamond tip, and they were etched in KOH solutions to investigate chemical characteristics of the machined silicon surface. After the etching process, the convex structure was made because of masking effect of the affected layer generated by nano-scratch. On the basis of this fact, some line patterns with convex structures were fabricated. Achieved patterns can be used as a mold that will be used for mass production processes such as nanoimprint or PDMS molding process. All morphological data of scratch traces were scanned using atomic force microscope (AFM).

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.134-147
• /
• 2014

The aim of this study is to create smart wear that brings out the perspective person's individuality and creativity wearing these garments through various interactions. It is intended to build a prototype for a "Shape-folding Dress", which is length-adjustable skirt that responses with the environment of the wearer. In this process, four basic physical properties can be identified with fabric samples selected which are relatively stiff, including fusible interlining, organdy, silk, and ramie. In addition, two types of folding pattern specimens, "Basic Pattern" and "Diamond Pattern", and heat-steam were used to make the specimens so that the correlation could be calculated by recovery rate among flexing, stiffness and tensile properties. As a result, compared to other fabrics, the silk showed low stress to repeat folding and unfolding process, and its recovery rate of elongation deformation was stable without being affected by the different folding types and twice repeated process. In this study, forming a circuit using an Arduino, illuminance sensor, motors, and pulley, the prototype was created with a silk fabric.

• Korean Institute of Interior Design Journal
• /
• v.26 no.5
• /
• pp.106-116
• /
• 2017

In the 1900s, the cultural crossing of East and West was realized through the acceptance and reproduction of culture. Cultural change in the Orient was the result of attempts to harmonize the West's images, which they chose in their respective countries, with their own culture. However, research on design history until now has been centered on the West, and East was regarded as a beneficiary of civilization inherited from Western's. From the point of view of Western design history as a main trend, the unique characteristics of Korean design culture are not revealed. Therefore, through this studies, we want to distinguish Korea's modern design, which has been recognized as a minority. For the study, through the wallpaper, which is one of the detailed components of the interior space in modern times, we try to analyze the socio - cultural historical factors and design characteristics influencing the formation of the interior space in modern times. Summarizing a result of research. The early modern wallpaper of England mainly uses plants as motifs. But In Korea, animal patterns and letter patterns were used. The reason why European wallpaper was mainly a plant at the time was that the structure of the motif was useful for the process of creation. However, in the case of the Korean wallpaper pattern, the theme was selected according to the meaning of the motif, and it was abstracted appropriately for the 2D design. As a result, many geometric shapes were formed. In addition, European wallpaper pattern is more complex and organic than Korean wallpaper pattern. Therefore, the boundary of the central pattern as the basic unit is unclear and the patterns are connected. The pattern development method is not a simple repetition but a combination of symmetry and repetition. In Korea, on the other hand, the boundaries of unit patterns are clear and patterns are developed by simple repetition. There are many diamond-type repeating patterns in particular.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.7-8
• /
• 2010

The surface conductive layer (SCL) of chemical vapor deposition (CVD) diamonds has attracting much interest. However, neither photoemission electron microscopic (PEEM) nor micro-spectroscopic (PEEMS) information is available so far. Since SCL retains in an ultra-high vacuum (UHV) condition, PEEM or PEEMS study will give an insight of SCL, which is the subject of the present study. The sample was made on a Ib-type HTHP diamond (001) substrate by non-doping CVD growthin a DC-plasma deposition chamber. The SCL properties of the sample in air were; a few tens K/Sq. in sheet resistance, ${\sim}180\;cm^2/vs$ in Hall mobility, ${\sim}2{\times}10^{12}/cm^2$ in carrier concentration. The root-square-mean surface roughness (Rq) of the sample was ~0.2nm as checked by AFM. A $2{\times}1$ LEED pattern and a sheet resistance of several hundreds K/Sq. in UHV were checked in a UHV chamber with an in-situ resist-meter [1]. The sample was then installed in a commercial PEEM/S apparatus (Omicron FOCUS IS-PEEM) which was composed of electro-static-lens optics together with an electron energy-analyzer. The presence of SCL was regularly monitored by measuring resistance between two electrodes (colloidal graphite) pasted on the two ends of sample surface. Figure 1 shows two PEEM images of a same area of the sample; a) is excited with a Hg-lamp and b) with a Xe-lamp. The maximum photon energy of the Hg-lamp is ~4.9 eV which is smaller that the band gap energy ($E_G=5.5\;eV$) of diamond and the maximum photon energy of the Xe-lamp is ~6.2 eV which is larger than $E_G$. The image that appear with the Hg-lamp can be due to photo-excitation to unoccupied states of the hydrogen-terminated negative electron affinity (NEA) diamond surface [2]. Secondary electron energy distribution of the white background of Figs.1a) and b) indeed shows that the whole surface is NEA except a large black dot on the upper center. However, Figs.1a) and 1b) show several features that are qualitatively different from each other. Some of the differences are the followings: the two main dark lines A and B in Fig.1b) are not at all obvious and the white lines B and C in Fig.1b) appear to be dark lines in Fig.1a). A PEEMS analysis of secondary electron energy distribution showed that all of the features A-D have negative electron affinity with marginal differences among them. These differences can be attributed to differences in the details of energy band bending underneath the surface present in SCL [3].

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.17-22
• /
• 2004

The purpose of this study was to obtain the basic element of patterns, which is the motif, from the existing art works and use it to create and simulate a variety of patterns to show the practical use of the computer. Natural dyed works of geometric shapes like squares and 1/4 of circles, each dyed with a different natural dyes, were produced and motifs were extracted. Then using the 4D box in Adobe Photoshop v.6.0, the developing pattern change and simulation effects when using different patterns and different repetition settings were examined. Observations were made as the motifs were replicated. Different patterns like a diagonal line, a square and a circle appeared. In order to find out the effects according to the changes, the motifs from work's square portions, circle centre, and the composition of eight motifs were extracted and used. The repeated patterns according to the extracted motifs simply showed that in the case of just repeating and arranging, square patterns appeared. By replicating and arranging, the motif and the allophone were matched and patterns with regular lines were formed, like a twill, pointed twill line. By setting the direction to Y and X in the repetition methodes, a typical half-drop arrangement or a brick pattern arrangement were formed according to 1/4, 2/4, 3/4, 1/3, or 2/3 in changes. Also the steepness of the slope changes quickly or in turn slowly as the rhombus shape appears. However in the case of a composed motif, an ogee pattern appeared. Lastly, by 3-D mapping patterns like a slant line, pointed twill patterns, diamond patterns, and the repeat patterns of a motif with a circle and a line combined, and a circle motif, an optical illusion could be observed.

• Journal of Korean Society for Quality Management
• /
• v.44 no.2
• /
• pp.265-276
• /
• 2016

Purpose: This paper reviews the papers on service quality issues which are published in the Journal of the Korean Society for Quality Management (KSQM) since 1965. The literature review is purposed to survey a variety of service quality issues for several categories in terms of industry as well as research model. Methods: By use of the double diamond design process model 71 papers are analyzed 4 stages which are discover, define, develop and deliver. And all of service quality issues are classified into 4 categories: service factory, mass service, service shop and professional service by the service process matrix typology. Results: According to this review, there are several features of research trends. There are 'from physical service to information-intensive service pattern' and 'from private sector to public sector pattern'. And the Kano model has been a steady-selling model to measure the service quality as like a SERVQUAL. Another meaningful issue was a convergency of the research method and tools such as BSC, CRM, AHP, DEA, Information System, Systgem Dynamics and 6 Sigma. Conclusion: The review paper is expected to provide future direction to improve service quality theories and applications. There are three future research topics: Application area, measurement model and research purpose.