• Korean Journal of Environmental Agriculture
• /
• v.19 no.5
• /
• pp.394-400
• /
• 2000

${\gamma}-Radiation$ at very low doses frequently has a stimulating or hormetic effect on the growth of organism. Effects of low dose ${\gamma}-ray$ irradiation on the root growth of soybean cultivars were investigated and hormetic effects by environmental conditions were compared with the occurrence of increased economic yield, seeds of cultivars were irradiated with the dose of $0.5{\sim}20Gy$ and cultivated in growth chamber controling temperature, humidity, light, greenhouse and field respectively. To understand hormetic effect on root growth of cultivars and the difference of hormetic effect by cultivation environment, harvested root of soybean cultivars were scanned with image file, and root surface area, root length, root average diameter etc. were examined by WinRhizo program. Also, dry weight of cultivars was examined. Root growth and dry weight of soybean cultivars showed apparently hormetic effect at cultivation of growth chamber condition. In field experiment executed for whole life cycle, yields of pea were not different significantly in each ${\gamma}-ray$ irradiated cultivars but weight of one hundred peas increased in whole ${\gamma}-ray$ irradiated cultivars. Increment of yield was assumed to be induced through shortening of maturing stage caused by ${\gamma}-ray$ hormesis in early growth stage.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.46-50
• /
• 2004

Images were acquired by the modulation of terahertz electromagnetic signals and compared by modulation frequencies. For the real-time acquisition of images a fast scanning method has been adopted utilizing a galvanometer. The acquired time domain waveforms were transformed into frequency domain data by fast Fourier transformations (FFT). We chose some frequency components to compare the resolution of images. The beam profiles at the focal position were measured by a knife-edge technique. Beam diameter was shown to decrease as the frequency increased. By scanning one- and two-dimensional samples a significant image enhancement was observed with the frequency increment. A nondesouctive imaging system using ㎔ electromagnetic pulses was also demonstrated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.175-181
• /
• 1987

Plugging effect of open-ended pipe piles is known to have a close relationship with the ratio of an embedment depth to a pile diameter, i.e., the relative embedment ratio. To evaluate this relationship in the concrete, load tests are performed on the open and the close ended model piles varying the relative embedment ratio as well as the relative density of the model test ground. Cross-shaped hollow plates are attached at the open pile ends to reduce the effective pile diameters, on which load tests are also performed. As a result, it is confirmed that higher plugging effect may be obtained in the denser ground at lower relative embedment. However, 100% plugging effect can be obtained at the relative embedment ratio of 25 or bigger regardless of the density of the ground. Increment of the plugging effect by introducing the cross-shaped attachment can hardly be achieved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2597-2602
• /
• 2000

The most effective means of evaluating remaining life is through the creep testing of samples removed from the component. But sampling of large specimen from in-service component is actually impossible. So, sampling device and small-specimen creep tester have been applied. Sampling device has been devised to extract mechanically small samples by hemispherical, diamond -coated cutter from the surface of turbine rotor bores and thick-walled pipes without subsequent weld repairs requiring post weld heat treatment. A method of manufacturing small creep specimen, 2min gage diameter and 10min gage length, using electron beam welding to attach grip section, has been proven. Small-specimen creep tester has been designed to control atmosphere to prevent stress increment by oxidation during experiment. To determine whether the small specimens successfully reproduce the behavior of large specimens, creep rupture tests for small and large specimens have been performed at identical conditions. Creep rupture times based on small specimens have closely agreed within 5% error compared with that of large specimen. The errors in rupture time have decreased at longer test period. This comparison validates the procedure for fabricating and testing on small specimen. This technique offers potential as an efficient method for remaining life assessment by direct sampling from in -service high temperature components.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.390-397
• /
• 2011

In this study, bending test was conducted as beam members in timber roadside safety barrier. The flexural properties of pitch pine round timber according to the diameters were evaluated. And then grading based on the growth characteristics applied to choosing the pitch pine round timbers which is met the criteria of guideline (Japan, 2008). MOR of round timber 160 mm is higher than other specimens from 100 mm to 140 mm. Because of lower juvenile wood ratio and higher density. The MOE of round timber is decreased according to the increment of diameter. Only 32% of the specimens has passed the limitations. Performance of pitch pine round timbers has confirmed to suitability roadside safety beam members according to the guideline (Japan, 2008).

• Journal of Forest and Environmental Science
• /
• v.31 no.1
• /
• pp.47-54
• /
• 2015

The study was performed to analyze the growth of the red pine (Pinus densiflora) in the Eastern Region of Korea. Stem profile data from a total of 8 dominant trees of which each tree represents its site were collected and used for the analysis. The stem volumes were calculated using Smalian's formula and much higher than the ones by Korea Forest Research Institute in larger than dbh 40 cm. The total bark volumes were more proportionally related to dbh and stem volume than to height and age. The bark thickness and volume decreased as relative height increases but increased as relative dbh increased. The average PAI of dbh and height reached the highest at 0.8 cm/yr (age 15) and at 0.45 m/yr (age 30) respectively, while the average PAI of volume steadily tended to increase up to age 80. The growth percentages of dbh, height and volume tended to decrease with age and volume growth percentage was higher than dbh and height.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.33-38
• /
• 1965

It has already been noted that some tree species, denoted as tolerant species, endure to behavior shadiness in growth than those species, denoted as intolerant species, since this fact of tolerance must be involved in silvicultural practice, the present author, with pinus rigida, pinus Thunbergii, and Buxus koreana, investigated the relation of degree of shadiness to soil moisture condition. Because tolerant and intolerant trees must be considered from the standpoint of their ability to use any of the factors that are likely to be at low concentration in the dense or open forest. The observed results may be summarized as follows : 1. The ability of tolerance of the species to shadiness is differently concluded by the base with which the analysis was made, i.c. Height, growth, diameter growth, T-R ratio or dry matter increase and so on. Regarding this point root collar increment or dry matter increase were considered more reasonable bases for discussing the tolerability. 2. When total length growth, including both stem and root, is taken as standard for the comparison of the ability of tolerance for each species, higher soil moisture condition and thicker shadeniss lessened the ability of pinus rigida, seedlings. Pinus Thunbergii, showed. However more moisture resistant than pinus rigida. Buxus koreana, seemed to have stronger ability of tolerance than any others. 3. When total dry matter content taken as standard, the results obtained are given in Fig, 3. In pinus rigida, the soil moisture supplemented the lack of light.

• Progress in Superconductivity
• /
• v.12 no.1
• /
• pp.12-16
• /
• 2010

We have measured the trapped field of YBCO bulk with different configuration by applying the magnetic field of $Nb_3Sn$ superconducting magnet. Initially the circular type of YBCO bulk superconductor was prepared and then hole, parallel to the c-axis and located at the center of bulk was mechanically drilled. The YBCO bulk with hole was filled with resin. Typical size of hole in YBCO bulk was 10 mm in diameter. Trapped field characteristics were compared with different specimen conditions. Our preliminary result indicates the increment rate of trapped field, 0.232 kG, measured on the YBCO without hole was much higher than that, 0.011 kG, measured on YBCO with hole.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.69-76
• /
• 2007

This study was conducted to evaluate the sideways overturning stability of side loaded mini-forwarder. The model of a prototype was developed using a 3D CAD modeler and the performance was experimentally validated. The prototype model was run on the multibody dynamic analysis program, RecurDyn 6.0, to simulate motions when the model traversed over a circular bump on a inclined ground surface. The simulation was performed at a constant forward speed of 1.85 km/h under the loaded and unloaded conditions. The forward direction was also controlled to vary from 0 to 360 degrees with an increment of 10 degrees. Results of the simulation showed safe regions in which the mini forwarder could travel safely in terms of direction and slope of the ground. Even when the mini-forwarder was loaded by 20 logs of 3.6 m long and 12 cm diameter, it traveled safely within the ground slopes of 1 to 45 degrees by directions.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.27-32
• /
• 1985

Individual tree growth in a given stand is considerably affected by its neighbouring trees or surrounding density. This trend is appeared more clearly in the unthinned stand. Relationship between growth of individual trees and density around them was analyzed by the use of the angle-summation method(AS method), and then multiple regression equation including variables of center trees and measures of surrounding density by the AS method was given for estimating diameter increment for the last five years and the next few years of center trees.