• 대한방사선기술학회지:방사선기술과학
• /
• 제31권3호
• /
• pp.277-285
• /
• 2008

MRI를 이용하여 정상의 뇌량 크기를 측정한 결과 다음과 같은 결론을 얻었다. 1. 전체 대상자의 부위별 평균, 최소, 최대 1) Anteroposterior length는 평균 69.30mm, 최소 50.70mm, 최대 80.40mm이었다. 2) Diameter of genu는 평균 11.93mm, 최소 6.00mm, 최대 18.50mm이었다. 3) Diameter of mid body는 평균 7.00mm, 최소 3.40mm, 최대 10.40mm이었다. 4) Diameter of narrowing portion은 평균 4.51mm, 최소 0.80mm, 최대 9.50mm이었다. 5) Diameter of splenium은 평균 12.17mm, 최소 6.90mm, 최대 17.20mm이었다. 2. 전체 대상자의 성별에 따른 부위별 비교 1) Anteroposterior length는 남자가 여자보다 컸으며, 성별에 따라 유의미한 차이를 보였다. 2) Diameter of genu와 diameter of mid body, diameter of narrowing portion은 남자가 여자보다 컸으나 유의미한 차이는 아니었다. 3) Diameter of splenium은 남자가 여자보다 컸으며, 통계적으로도 유의미한 차이를 보였다. 3. 전체 대상자의 부위별 상관관계 1) Diameter of genu는 anteroposterior length와 통계적으로 유의미한 정적 상관관계를 보였다. 2) Diameter of mid body는 anteroposterior length, diameter of genu와 통계적으로 유의미한 정적 상관 관계를 보였다. 3) Diameter of narrowing portion은 anteroposterior length와 통계적으로 유의미한 상관관계를 보이지 않았으나 diameter of genu, diameter of mid body와 통계적으로 유의미한 정적 상관관계를 보였다. 4) Diameter of splenium은 anteroposterior length와 diameter of genu, diameter of mid body, 그리고 diameter of narrowing portion과 통계적으로 유의미한 정적 상관관계를 보였다.

• 대한기계학회논문집
• /
• 제7권3호
• /
• pp.313-318
• /
• 1983

It is required in designing a spot welding to get in advance an estimated figure of nugget diameter. A method of estimating nugget diameter of low carbon steel sheets is suggested in tesms of utilizing elastic calculation in theory and of making a sectional observation of specimen of spot welding in experiment. The resultant findings are summarized as follows: 1) A contact diameter of sheet, 2.gamma.$_{o}$=d sub e/+(1.1)t, wheer de is the electrode tip diameter and t is the thickness of sheets. 2) The practical measurement of the nugget diameter reveals that $d_{n}$=(1.05) $d_{e}$+(0.9)t, and $d_{b}$ is less by 0.8-4.3% than 2.gamma.$_{o}$. 3) The more $d_{n}$ is as compared with t, the less the difference between a theoretical value and an experimental value is. 4) In the spot welding of thin steel sheets less than 3mm in thickness that are commonly used in sheet metal works, the contact diameter equals the nugget diameter. In this case, either the theoretical or experimental approach can be used for estimating the nugget diameter.meter.ter.r.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권5_6호
• /
• pp.176-186
• /
• 2007

상호연결망은 그래프로 모델링 할 수 있다: 노드는 정점으로 대응시키고, 링크는 에지로 대응시킨다. 상호연결망(그래프)의 지름은 서로 다른 모든 두 정점 사이의 최단경로 길이 중 최대이다. 상호연결망의 고장지름이란 연결도-1 개 이하의 임의의 정점에 고장이 있을 경우, 이들 고장 정점들을 제거한 연결망에서 모든 두 정점사이의 최단경로 길이 중 최대이다. 지름이 3이상이고 연결도가 r인 r-정규(regular) 그래프의 고장지름은 지름+1이상이다. 이 논문에서는 $m,n{\geq}3$ 인 2-차원 $m{\times}n$ 토러스에서 m=3 혹은 n=3일 때 고장지름은 max(m,n)이고, m,n>3일 때 고장지름은 지름 +1임을 보인다. 그리고 $k_i{\geq}3(1{\leq}i{\leq}d)$이고 $d{\geq}3$인 d- 차원 $k_1{\times}k_2{\times}{\cdots}{\times}k_d$ 토러스에서 서로 다른 임의의 두 정점 사이에 길이가 지름+1이하인 서로소인 경로들이 2d 개 존재함을 보인다. 두 정점 u와 v 사이의 서로소인 경로들이란, 공통의 정점들이 u와 v만 있는 경로들을 말한다. 이들 서로소인 경로들을 이용하여 $k_i{\geq}3(1{\leq}i{\leq}d)$이고 $d{\geq}3$인 d-차원 $k_1{\times}k_2{\times}{\cdots}{\times}k_d$ 토러스의 고장지름이 지름+1임을 보인다.

• 대한치과보철학회지
• /
• 제41권2호
• /
• pp.169-181
• /
• 2003

Statement of problem : The survival rate of wide diameter implants was lower than of 3.75-mm implants in some clinical researches. Purpose : The purpose of this study was to investigate the influence of implant diameter on the osseointegration of implants in the rabbit femoral condyle and tibial metaphyses by means of removal torque measurements and histomorphometric analysis. Material and Method : Ten adult New Zealand White rabbits were used in this study Two 3.75-mm diameter implants were inserted through one cortical layer in the tibial metaphyses and one 3.75-mm diameter implant was inserted in the femoral condyle. 5.0-mm diameter implants were inserted in the other leg in the same manner. A total of 60 implants (3.75-mm diameter implants:30 : 5.0-mm diameter implants:30) were installed. After a healing time of 4 and 12 weeks, the peak removal torque values required to shear off the implants were recorded. From the removal torque values (Ncm) obtained, the mean shear stress ($N/mm^2$) was calculated. And the percentage of direct bone-to-implant contact and the percentage of bone area inside the thread were measured by Kappa Image Base-metreo. The Student's t-test was undertaken for statistical analysis (p<0.05). Results : The removal torque value of 5.0-mm diameter implants was higher than of 3.75-mm diameter implants (p<0.05). The difference of shear stress value between 3.75-mm and 5.0-mm diameter implants was not statistically significant (p>0.05). The percentage direct bone-to-implant contact had no statistical difference between two groups (p>0.05). The percentage of bone area inside the thread had no statistical difference between two groups (p>0.05). Conclusion It is concluded that the quality f osseointegration is not influenced by increasing implant diameter.

• Journal of Forest and Environmental Science
• /
• 제27권2호
• /
• pp.113-118
• /
• 2011

This study was carried out to analyze annual diameter growth characteristics for major 11 tree species using the data for Gangwon province of the National Forest Resources Inventory in 2007. The annual diameter growth of coniferous species was 5.02 mm, 4.70 mm, and 3.90 mm in Korean white pine, Japanese larch, and Korean red pine, respectively. In growths of the deciduous trees, dogwood, basswood, and cork oak had 3.55 mm, 3.48 mm and 3.01 mm, respectively. Average of the annual diameter growths for all species was 3.38 mm. The relationship between diameter growth and age class showed that the growth rate decreased for all species as age increased. The age class II had the highest annual diameter rate. In relation of the stand density(trees per hectare) and diameter growth, the diameter growth tended to decrease as the stand density increased for most species, especially Korean white pine, cork oak, and basswood. Finally age had the highest value in the correlation coefficients between measurement factor and growth rate regardless of species.

• 한국화재소방학회논문지
• /
• 제29권3호
• /
• pp.48-52
• /
• 2015

이 연구는 기존의 미터링 오리피스보다 유량계수가 작은 미터링 벤츄리를 이용하여 포소화약제 혼합장치를 실무에서 주로 사용하는 직경으로 제작하여 혼합비가 적정한지를 평가한 연구로써 3%용 혼합비의 경우 가압수 직경 76.2 mm(포원액 직경 31.75 mm)는 3.1~3.5%의 혼합비의 변화를 나타내었고, 가압수 직경 101.6 mm(포원액 직경 38.1 mm)는 3.3~3.7%의 변화를 나타내어 포소화약제혼합장치등의 성능인증 및 제품검사의 기술기준인 3.0~3.9%를 만족하는 것을 알 수 있었다. 6% 혼합비의 경우 가압수 직경 76.2 mm는 6.4~6.8%의 혼합비의 변화를 나타내었고, 가압수 직경 101.6 mm는 6.25~6.5%의 변화를 나타내어 포소화약제혼합장치등의 성능인증 및 제품검사의 기술기준인 6.0~7.0%를 만족하는 것을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.224-234
• /
• 2007

Large diameter tubes have been used until comparatively lately. However, small diameter tubes are largely used because of their high efficiency in heat transfer and low cost, recently. This study focuses on the experimental research of the heat transfer coefficients during evaporation process of R-22 and R-134a in small diameter tubes. The evaporation heat transfer coefficients were measured in smooth horizontal copper tubes with ID 1.77, 3.36 and 5.35 mm. The evaporation heat transfer coefficients in the small diameter tubes (ID <7 mm) were observed to be strongly affected by the size of tube diameters and to differ from those of general predictions in the large diameter tubes. The heat transfer coefficients of ID 1.77 mm copper tube were higher by 20 and 30 % than those of ID 3.36 mm, ID 5.35 mm copper tubes respectively. Also, it was found that it was very difficult to apply some well-known previous predictions (Shah's, Jung's. Kandlikar's and Oh-Katsuda's correlation) to small diameter tubes. Based on the data, the new correlation is proposed to predict the evaporation heat transfer coefficients of R-22 and R-134a in small diameter tubes.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권3호
• /
• pp.13-22
• /
• 2003

현장공기분사공정의 복원효율에 있어서 중요한 인자로 작용 할 수 있는 것은 공기가 지하 포화대수층을 통과하면서 생기는 공기분사에 따른 흐름 양상과 토양입자크기에 따른 공기의 영향반경이다. 토양입자크기별 AMG 0.34, 1.38, 3.89 mm diameter 3가지 입자크기로 실험한 결과 AMG 0.34 mm diameter의 포화 대수층에서는 공기가 처음 결정된 방향으로만 흐르는 채널링 현상(channelized air flow)과 포화 대수층 가장 윗면에서는 확장모양(expansion state)을 가졌으며, 공기영향반경은 단위 면적당 15.2%/$\textrm{m}^2$이었다. AMG 1.38, 3.89 mm diameter의 포화 대수층에서는 공기가 퍼지는 현상(pervasive air flow)과 포화 대수층 가장 윗면에서는 각각 붕괴의 조짐(onset of collapse), 안정한 상태로 퍼짐모양(approach to steady state)을 가졌으며, 단위면적당 각각 37.0%/$\textrm{m}^2$, 30.0%/$\textrm{m}^2$영향반경이 계산되었다. 이 실험을 통해서 현장공기분사공정에 있어서 토양입자 크기에 따른 최대 영향반경효율을 얻을 수 있는 토양입자의 크기는 AMG 1.5-2.5 mm diameter로 사료된다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.213-217
• /
• 2004

Laboratory scale study for an area of influence and flowing aspect of groundwater saturated zone was conducted for three sediment grains. On the AMG(Average Modal diameter Grains) 0.34, 1.38, 3.89mm diameter samples, the affected area of the aquifer were 15.2, 37.0, 30.0%/m2 each. Air flow for AMG 0.34mm diameter grain size provides indication of pattern of channelized air flow in saturated zone and expansion state in above saturated zone. For AMG of 1.38, 3.89mm diameter grains, air flow are pervasive air flow, forming a symmetrical cone of influence around the injection point. And also AMG 1.38, 3.89mm diameter samples show onset of collapse and approach to steady state in above saturated zone, respectively. In this study, optimal sites for in situ air sparging, may be grain diameters between about AMC 1.5～2.5mm diameter.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3872-3877
• /
• 1975

This study was conducted to examine the effects of the change of cap hole diameter and pressure on the travelling distance and the sprayed particle size for the medium range nozzle. The results of this study are summarized as follows; 1) The effective travelling distance was about from 1 meter to 8 meters and centro-position of the travelling distance was about 3 or 5 meters. 2) Main effect of change of cap hole diameter for the travelling distance was a slight convex quadratic curve. 3) Main effect of change of pressure increased linearly, its increasing rate about 1.6 was large. 4) Sizes of sprayed particles were less than 250${\mu}$ generally and the sizes decreased according to the increasing of travelling distance. 5) Changes of diameter of sprayed particles by cap hole diameter increased in accordance with increasing of cap hole diameter. 6) Changes of diameter of sprayed particles by the groove depth of swirl plate was very slight.