• Journal of Korean Institute of Industrial Engineers
• /
• v.17 no.1
• /
• pp.75-82
• /
• 1991

This research is concerned with Machine-Part Group Formation(MPGF) methodology for Flexible Manufacturing Systems(FMS). The purpose of the research is to develop a new heuristic algorithm for effectively solving MPGF problem. The new algorithm is proposed and evaluated by 100 machine-part incidence matrices generated. The performance measures are (1) grouping ability of mutually exclusive block-diagonal form. (2) number of unit group and exceptional elements, and (3) grouping time. The new heuristic algorithm has the following characteristics to effectively conduct MPGF : (a) The mathematical model is presented for rapid forming the proper number of unit groups and grouping mutually exclusive block-diagonal form, (b) The simple and effective mathematical analysis method of Rank Order Clustering(ROC) algorithm is applied to minimize intra-group journeys in each group and exceptional elements in the whole group. The results are compared with those from Expert System(ES) algorithm and ROC algorithm. The results show that the new algorithm always gives the group of mutually exclusive block-diagonal form and better results(85%) than ES algorithm and ROC algorithm.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.347-350
• /
• 2009

The latticed mesh grounding is compared with the diagonal mesh grounding. In the result, The latticed mesh grounding better than the diagonal mesh grounding at the maximum touch voltage, the grounding resistance and the total length of conductors.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.382-389
• /
• 2013

In anti-jamming GPS receiver, adaptive signal processing techniques in which the radiation pattern of adaptive array antenna of elements may be adaptively changed used to reject interference, clutter, and jamming signals. In this paper, I describes adaptive signal processing technique using the sample matrix inversion(SMI) algorithm. This adaptive signal processing technique can be applied effectively to wideband/narrowband anti-jamming GPS receiver because it does not consider the satellite signal directions and GPS signal power level exists below the thermal noise. I also analyzed the effects of covariance matrix sample size and diagonal loading technique on the system performance of five-element circular array antenna. To attain near optimum performance, more samples required for calculation covariance matrix. Diagonal loading technique reduces the system nulling capability against low-power jamming signals, but this technique improves robustness of adaptive array antenna.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1365-1370
• /
• 2013

This paper examines the effects of magnetic induction attenuation on current distribution in the exit regions of the Faraday-type, non-equilibrium plasma Magnetohydrodynamic (MHD) generator by numerical calculation using cesium-seeded helium. Calculations show that reasonable magnetic induction attenuation creates a very uniform current distribution near the exit region of generator channel. Furthermore, it was determined that the current distribution in the middle part of generator is negligible, and the output electrodes can be used without large ballast resistors. In addition, the inside resistance of the exit region and the current concentration at the exit electrode edges, both decrease with the attenuation of magnetic flux density. The author illustrates that the exit electrodes of the diagonal Faraday-type, non-equilibrium plasma MHD generator should be arranged in the attenuation region of the magnetic induction, in order to improve the electrical parameters of the generator.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2023-2024
• /
• 2006

1962년 Gallager에 의해 처음 제안된 LDPC 부호는 복호를 수행하는 부호방식으로 패리티 행렬(H)의 대부분이 0으로 구성되어 복호시에 적은 연산량을 요구하며, shannon의 한계에 도달하는 복호 능력으로, 차세대 통신의 주된 부호 방식으로 고려되고 있다. 하지만, LDPC는 부호화에 있어서 여타 다른 부호방식에 비해 복잡한 특성을 가지고 있으므로, 이를 개선하기 위한 부호방식의 적용이 필요하다. 본 논문에서는 효율 적인 부호화를 위하여 Dual-diagonal H parity행렬을 구성 하고, 쉽게 부호 길이를 확장 할 수 있는 Quasi-Cyclic 방식을 적용한 복호기를 구현하였다.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.3
• /
• pp.223-231
• /
• 2009

Experimental investigations were conducted for the internal flows of the axial flow stator and diagonal flow rotor. Corner separation near the hub surface and the suction surface of stator blade are mainly focused on. For the design flow rate, the values of the axial velocity and the total pressure at stator outlet decrease between near the suction surface and near the hub surface by the influence of corner wall. For the flow rate of 80-90% of the design flow rate, the corner separation of the stator between the suction surface and the hub surface is observed, which becomes widely spread for 80% of the design flow rate. At rotor outlet for 81% of the design flow rate, the low axial velocity region grows between near the suction surface of rotor and the casing surface because of the tip leakage flow of the rotor.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.757-764
• /
• 2004

This paper deals with the numerical study on the displacement behavior of corner areas in an excavation site. Several corner areas always exist in the excavation site. The corner area has two free surfaces, which may become serious weak point from the viewpoint of structural stability. If the structural reinforcements are not applied adequately in corner areas, significant displacement of retaining wall could occur. What is worse, the collapse of retaining system rarely happens. In this paper, 3D numerical analyses were performed to investigate the effect of the arrangement of diagonal and normal strut. From the analysis results, it is found that the spacing between diagonal strut and normal strut should be less than 4m to avoid excessive displacement due to excavation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.78-81
• /
• 1997

In this study, we prepose the dynamic gait in consideration of emerge efficiency. The proposed dynamic gait is applied to the quadruped walking robot and experiments are performed for real robot. We proposed the dynamic gait is diagonal gait which is modified the trot gait in consideration of energy efficiency. The proposed gait is composed of two steps. In one step, the robot walks in the trot gait. In the other step, the robot walks with making the center of gravity lie on the two legs supporting line. Realization of the diagonal intermittent trot gait is performed by open loop contal and motion planning of the proposed gait. The validity of the purposed gait is confirmed by our experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.575-580
• /
• 1992

Mixed H$_{2}$/H$_{\infty}$ robust control synthesis is considered for finite dimensional linear time-invariant systems under the presence of diagonal structured uncertainties. Such uncertainties arise for instance when there is real perturbation in the nominal model of the state space system or when modeling multiple (unstructured) uncertainty at different locations in the feedback loop. This synthesis problem is reduced to convex optimization problem over a bounded subset of matrices as well as diagonal matrix having certain structure. For computational purpose, this convex optimization problem is further reduced into Generalized Eigenvalue Minimization Problem where a powerful algorithm based on interior point method has been recently developed..

• Journal of applied mathematics & informatics
• /
• v.38 no.5_6
• /
• pp.489-506
• /
• 2020

The spatial fractional diffusion equation can be discretized by employing the implicit finite difference scheme using the shifted Grünwald formula. The discretized linear system is obtained, whose the coefficient matrix has a diagonal-plus-Toeplitz structure. In order to solve the diagonal-plus-Toeplitz linear system, on the basis of circulant and skew-circulant splitting (CSCS splitting), we construct a new and efficient iterative method, called DSCS iterative methods, which have two parameters. Than we prove the convergence of DSCS methods. As a focus, we derive the simple and effective values of two optimal parameters under some restrictions. Some numerical experiments are carried out to illustrate the validity and accuracy of the new methods.