• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.121-121
• /
• 2000

This paper presents a design of macro-micro system for high-speed mounting of micro-chips. A macro motion device is driven by DC servomotor and ball screw mechanism. To obtain fast response, a micro motion device utilizes a precision elector magnetic actuator In order to reduce peak impact force, We evaluate the design parameters that have an effect on it. And a characteristic of response is simulated using PID controller in velocity and force control.

• 한국정보처리학회논문지
• /
• 제7권5호
• /
• pp.1553-1558
• /
• 2000

The development of recent computer and communication technology has changed Automation System using communication network, and the new USB substituted with Serial Communication is already developed and now popular. In this paper, High speed data transfer system design using USB interface and communication application simulated for the situation is introduced. Base on USB, we can use additive function efficiently coped with former field device. The 'Winsock Connection USB Ternimal,' designed for hardware simulation, control the field device connected by USB, and provide the way for remote control of field device by Telnet connection through TCP/IP. That theorem can guarantee controlling direct input dta of user, and acuate function of field device using USB Packet Transmission. As a result of amy research, this communication application system identified good operation of field device with those of former field device. Another result of the experiment of hardware operation, we obtained accomplishment that the sufficient bandwidth guarantee of USB has high speed and high performance, and reduce the occupancy of system.

• 항공우주산업기술동향
• /
• 제6권2호
• /
• pp.125-132
• /
• 2008

빨리 이동하는 피사체의 움직임을 상세히 분석하기 위해서는 고속 카메라가 필수 불가결하다. 본 논문에서는 고속 필름 카메라와 고속 디지털 카메라의 기본개념, 역사적 배경 및 향후 고속 카메라의 동향을 기술 하고자 한다. 또한 해외 및 국내 고속 카메라의 사용현황과 나로 우주센터에서 사용될 고속 카메라의 운용계획을 기술 하고자 한다.

• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.85-90
• /
• 2010

This study was carried out to develop turning radius measuring method and device of using a DGPS speed sensor for agricultural tractors. The measurement system consisted of a DGPS speed sensor, a data acquisition device, a touch panel, a photo sensor, a radio modem and a notebook computer. Three methods were developed: average of turning speed-time method, integral of turning speed-time method, and speed-heading angular velocity method. Best method was average of turning speed-time method which could be used with a maximum error 2.7 cm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.249-252
• /
• 2000

A new Smart rower IC's based on the Partial SOI technology was designed for such applications as mobile communication systems, high-speed HDD systems etc. A new methodology of integrating a 0.8${\mu}{\textrm}{m}$ BiCMOS compatible Smart Power technology, high voltage bipolar device, high speed SAVEN bipolar device, LDD NMOSFET and a new LDMOSFET based on the Partial SOI technology is presented in this paper. The high voltage bipolar device has a breakdown voltage of 40V for the output stage of analog circuit. The optimized Partial SOI LDMOSFET has an off-state breakdown voltage of 75 V and a specific on- resistance of 0.249mΩ.$\textrm{cm}^2$ with the drift region length of 3.5${\mu}{\textrm}{m}$. The high-speed SAVEN bipolar device shows cut-off frequency of about 21㎓. The simulator DIOS and DESSIS has been used to get these results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.73-75
• /
• 2002

Single phase SRM(switched reluctance motor) is very simple in structure and in driving circuit than three phase SRM. But it can't be started by itself. The prototype of salient pole rotor type single phase SRM was fabricated in former research and the starting device was installed in bottom of the rotor for generating start torque. The starting device is composed of permanent magnet and it is placed the rotor at specific position which is generated positive torque when the prototype is started. Therefore the prototype was started by itself but it is also affected the torque and the speed in operation. On this paper, the influence of the starting device on no-load speed of the prototype was confirmed by measurement of no-load speed according to installation of the starting device or not.

• KSBB Journal
• /
• 제15권3호
• /
• pp.280-284
• /
• 2000

The simple imcroprocessor device was provided for the control of dissolved oxygen(DO) level. The DO analog signal output from fementer was used as a measurement variable and the agitation speed of fermenter was used as a manipulatio variable. Agitation speed was manipulated to maintain DO level above 10% of saturation condition during cell growth period with microprocessor. Since the experimental resultsshowed that the DO level was maintained above 10% and agitation speed was inverse proportional to DO level ithis simple control device can be used for the DO control of fermenter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.61-65
• /
• 2000

In this paper We have developed the high-speed controller for haptic control. The proposed controller is based on the PCI/FPGA technology which can calculate the real position and transmit the force data to device rapidly. The haptic system is composed of 6DOF force display device high-speed controller. The developed system will be used on constructing the dynamical virtual environment. To show the efficiency of our system we designed simulation program of force-reflecting. As the result of the experiment we found that the controller has much higher resolution than some other controller It is so efficient in a 1 PC-based system with 1[kHz] haptic interrupt cycle.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.1-10
• /
• 2008

The present status of technical development of a highly scalable, high-speed non-volatile PCM is overviewed. Major technical challenges are described along with solutions that are being pursued in terms of innovative device structures and fabrication technologies, new phase change materials, and new memory schemes.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제16권4호
• /
• pp.303-307
• /
• 2016

Background: In dental intravenous sedation, continuous intravenous infusion of a low-dose drug requires an infusion pump such as a syringe pump. To develop a new syringe pump for clinical use, the functions of the pump must meet certain international standards. Various safety and efficacy tests must be performed on the syringe pump, as stipulated by these standards, and an approval must be received from the approving agency based on such test results. Methods: The authors of the present study developed a novel syringe pump and performed efficacy evaluation by testing its infusion speed at 1 and 25 ml/h, and infusion performance testing at 2 and 24 h. Moreover, performance evaluation was conducted by comparing the novel pump to an existing pump with the infusion speed varied from 1 to 5 ml/h. Results: In the efficacy testing on the newly developed syringe pump, infusion with the infusion speed initially set to 1 ml/h resulted in infusion speeds of 1.00 and 0.99 ml/h in the 2- and 24-h assessment, respectively. Changing the infusion speed setting to 25 ml/h resulted in an infusion speed of 25.09 and 23.92 ml/h in the 2- and 24-h assessment, respectively. These results show no significant differences when compared with other commercially available pumps. Conclusions: The efficacy testing of the newly developed syringe pump showed the accuracy to be within tolerance. Based on these findings, we believe that the newly developed syringe pump is suitable for clinical use.