• Journal of Korea Multimedia Society
• /
• v.14 no.8
• /
• pp.981-991
• /
• 2011

MIP(Maximum Intensity Projection) is a volume rendering technique which is essential for the medical imaging system. MIP rendering based on the ray casting method produces high quality images but takes a long time. Our aim is improvement of the rendering speed using GPGPU(General-purpose computing on Graphic Process Unit) technique. In this paper, we present the ray casting algorithm based on CUDA(an acronym for Compute Unified Device Architecture) which is a programming language for GPGPU and we suggest new acceleration methods for CUDA. In detail, we propose the block based space leaping which skips unnecessary regions of volume data for CUDA, the bisection method which is a fast method to find a block edge, and the initial value estimation method which improves the probability of space leaping. Due to the proposed methods, we noticeably improve the rendering speed without image quality degradation.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.65-70
• /
• 2019

In recently, ship trajectory data consisting of ship position, speed, course, and so on can be obtained from the Automatic Identification System device with which all ships should be equipped. These data are gathered more than 2GB every day at a crowed sea port and used for analysis of ship traffic statistic and patterns. In this study, we propose a method to process ship trajectory data efficiently with distributed computing resources using MapReduce algorithm. In data preprocessing phase, ship dynamic and static data are integrated into target dataset and filtered out ship trajectory that is not of interest. In mapping phase, we convert ship's position to Geohash code, and assign Geohash and ship MMSI to key and value. In reducing phase, key-value pairs are sorted according to the same key value and counted the ship traffic number in a grid cell. To evaluate the proposed method, we implemented it and compared it with IALA waterway risk assessment program(IWRAP) in their performance. The data processing performance improve 1 to 4 times that of the existing ship trajectory analysis program.

• Journal of Distribution Science
• /
• v.16 no.4
• /
• pp.67-74
• /
• 2018

Purpose - Most of the amendments to the law on the improvement of the distribution structure of mobile communication terminal equipment, the fully self-sufficient system of terminals, and the separated disclosure system on the terminals are aimed at securing transparency of the distribution structure by eliminating or reducing handset subsidies. This study investigates what items are important for the purchase of mobile phones in various and rapidly changing mobile phone markets from the consumer's point of view and tries to make a strategic suggestion for future mobile distribution strategies. Research design, data, and methodology - The procedure of this study takes place in four steps. In step 1, only the SF type respondents selected for this study were extracted through MBTI analysis. In step 2, they were divided into three hierarchies for the AHP analysis and each element was arranged. In step 3, the AHP analysis was converted to a Fuzzy-AHP number using the trigonometric centroid method. This was to eliminate the ambiguity of the response by converting into a fuzzy number even if data consistency was maintained with CI value below 0.1. In step 4, the number of converted 2-layer and 3-layer was combined to derive the priority when the final handset is selected. Results - First, the highest importance among the four items in the second tier was the terminal function item, followed by brand, price, and design item. Second, in the third tier, the highest importance was level of after-sales service, followed by device price, processing speed, ease of use, usefulness, and rate system. Third, the arithmetic average of the determinant of the fuzzy function showed that processing speed, ease of use and usefulness in the function item, level of after-sales service in the brand item, and device price in the price item were the five most important factors among 16 choice factors. Conclusions - First, there will be a change in the consumption patterns of consumers who have compared distributors and dealers to purchase handsets with more subsidies. Second, it is highly likely that people will purchase new handsets only when they need to change their devices because they can not receive subsidies by switching phone brands any more.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.273-273
• /
• 2014

Quantum-dot sensitized solar cells (QDSCs) are an emerging class of solar cells owing to their easy fabrication, low cost and material diversity. Despite of the fact that the maximum conversion efficiency of QDSCs is still far less than that of Dye-Sensitized Solar Cells (>12 %), their unique characteristics like Multiple Exciton Generation (MEG), energy band tune-ability and tendency to incorporate multiple co-sensitizers concurrently has made QDs a suitable alternative to expensive dyes for solar cell application. Lead Sulfide (PbS) Quantum dot sensitized solar cells are theoretically proficient enough to have a photo-current density ($J_{sc}$) of $36mA/cm^2$, but practically there are very few reports on photocurrent enhancement in PbS QDSCs. Recently, $Hg^{2+}$ incorporated PbS quantumdots and Cadmium Sulfide (CdS) co-sensitized PbS solarcells are reported to show an improvement in photo-current density ($J_{sc}$). In this study, we explored the efficacy of $In_2S_3$ as an interfacial layer deposited through SILAR process for PbS QDSCs. $In_2S_3$ was chosen as the interfacial layer in order to avoid the usage of hazardous CdS or Mercury (Hg). Herein, the deposition of $In_2S_3$ interfacial layer on $TiO_2$ prior to PbS QDs exhibited a direct enhancement in the photo-current (Isc). Improved photo-absorption as well as interfacial recombination barrier caused by $In_2S_3$ deposition increased the photo-current density ($J_{sc}$) from $13mA/cm^2$ to $15.5mA/cm^2$ for single cycle of $In_2S_3$ deposition. Increase in the number of cycles of $In_2S_3$ deposition was found to deteriorate the photocurrent, however it increased $V_{oc}$ of the device which reached to an optimum value of 2.25% Photo-conversion Efficiency (PCE) for 2 cycles of $In_2S_3$ deposition. Effect of Heat Treatment, Normalized Current Stability, Open Circuit Voltage Decay and Dark IV Characteristics were further measured to reveal the characteristics of device.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.991-996
• /
• 2001

It is well known that there are two experimental errors on acoustic decay measurements. One is due to the influence of the band pass filter the other one is that of an averaging device. In this paper the influence of the filter is in detail investigated. To minimize the influence of filter, the product of the filter bandwidth Β (3㏈ bandwidth) and the reverberation time T$\sub$60/ of the room under test is at least 16. Moreover, if the initial part of an acoustic decay curve is important, the strong requirement, i.e. BT$\sub$60/＞ 64, must be satisfied. In this paper, the wavelet filter bank instead of the band pass filter bank is applied to obtain an acoustic decay curve. As results, the influence of filter is reduced and then the value of BT$\sub$60/ required for obtaining an acceptable decay curve is at least 4. The strong requirement for the initial part of a decay curve is also replaced by the BT$\sub$60/＞ 16 instead of BT$\sub$60/＞ 64.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.109-116
• /
• 2002

We propose a novel very short (< $300{\mu}m$) vertical directional coupler switch with high extinction ratios larger than 30 dB. The device consists of a switching operation induced section (SOIS), an extinction ratio adjusted section (ERAS), and an extinction ratio enhanced section (ERES). These are achieved by changing the refractive index of one core. The switching operation is induced by changing the refractive index of one core in the SOIS. The improvement of extinction ratios larger than 30 dB for both the cross and bar states is made by controlling the asymmetry of the refractive indices of both cores in the ERES. Through the ERAS, different extinction ratios between the cross and bar states at the end of the SOIS are changed to the same value. For this reason, the optimum asymmetry of the refractive indices of the cores for the maximum extinction ratios and the lengths of ERES are the same for cross and bar states. Design guidelines for high extinction ratios with large tolerances are presented.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.160-163
• /
• 2013

We investigated the effect of light intensity and wavelength of a solar cell device by using photoconductive atomic force microscopy (PC-AFM). The $POCl_3$ diffusion doping process was used to produce a p-n junction solar cell device based on a Poly-Si wafer and the electrical properties of prepared solar cells were measured using a solar cell simulator system. The measured open circuit voltage ($V_{oc}$) is 0.59 V and the short circuit current ($I_{sc}$) is 48.5 mA. Also, the values of the fill factors and efficiencies of the devices are 0.7% and approximately 13.6%, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, was used for direct measurements of photoelectric characteristics in local instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics were observed. Results obtained through PC-AFM were compared with the electric/optical characteristics data obtained through a solar simulator. The voltage ($V_{PC-AFM}$) at which the current was 0 A in the I-V characteristic curves increased sharply up to 1.8 $mW/cm^2$, peaking and slowly falling as light intensity increased. Here, $V_{PC-AFM}$ at 1.8 $mW/cm^2$ was 0.29 V, which corresponds to 59% of the average $V_{oc}$ value, as measured with the solar simulator. Also, while light wavelength was increased from 300 nm to 1,100 nm, the external quantum efficiency (EQE) and results from PC-AFM showed similar trends at the macro scale, but returned different results in several sections, indicating the need for detailed analysis and improvement in the future.

• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.680-684
• /
• 2018

We investigate the effect of light intensity and wavelength of a solar cell device using photoconductive atomic force microscopy(PC-AFM). A $POCl_3$ diffusion doping process is used to produce a p-n junction solar cell device based on a polySi wafer, and the electrical properties of prepared solar cells are measured using a solar cell simulator system. The measured open circuit voltage($V_{oc}$) is 0.59 V and the short circuit current($I_{sc}$) is 48.5 mA. Moreover, the values of the fill factors and efficiencies of the devices are 0.7 and approximately 13.6 %, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, is used for direct measurements of photoelectric characteristics in limited areas instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics are observed. Results obtained through PC-AFM are compared with the electric/optical characteristics data obtained through a solar simulator. The voltage($V_{PC-AFM}$) at which the current is 0 A in the I-V characteristic curves increases sharply up to $18W/m^2$, peaking and slowly falling as light intensity increases. Here, $V_{PC-AFM}$ at $18W/m^2$ is 0.29 V, which corresponds to 59 % of the average $V_{oc}$ value, as measured with the solar simulator. Furthermore, while the light wavelength increases from 300 nm to 1,100 nm, the external quantum efficiency(EQE) and results from PC-AFM show similar trends at the macro scale but reveal different results in several sections, indicating the need for detailed analysis and improvement in the future.

• Human Ecology Research
• /
• v.53 no.6
• /
• pp.619-628
• /
• 2015

Baby boomers who have rebuilt the Korean economy over the last half a century are now transitioning into a silver generation who are over 65 years of age. New silver consumers are qualitatively and quantitatively different from the previous generation and are considered to be 'the single most consumption-leading generation.' The number of new silver consumers using department stores and traditional markets has increased. SPSS ver. 21.0 was used with the methods of frequency analysis, t-test, one-way analysis of variance (ANOVA), device master record test, and regression analysis. This research studies consumer satisfaction of new silver consumers on department stores and traditional markets among retailing. The improvement of the parking environment is the most urgent issue for traditional markets because the long-term assessments of parking areas indicate that it is necessary to provide improved convenience for consumers. Salesman satisfaction has improved and consumer satisfaction ranks salesman satisfaction high for traditional markets; however, price satisfaction is low and the distribution system should be improved to supply products at a lower price. Salesman and price satisfaction should be improved at depart stores. Traditional markets should also promote consumer satisfaction through consistent management to make consumers trust information in regards to quality control and production and distribution; in addition, department stores should increase consumer satisfaction by maintaining store systems such as product diversification and display, cleanness, and atmosphere.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.227-232
• /
• 2018

The purpose of this study is to empirically measure the consumer response to mobile phone price changes in small and medium cities that have been alienated from Chinese marketing research. To do this, we measured price response through consumer survey based on conjoint analysis. The results of this study are as follows. First, it show a typical pattern in which the part-worth decreases as the price increases. This suggests that there is room for improvement in profitability through pricing strategy for small and medium cities. Second, the decrease of the utility value according to the price increase was different for each city. This implies that difference of price response by city should be used strategically when planning price tactics. This study has contributed to understanding the expansion of research subjects from large cities to small cities and the price response phenomenon of small cities. And it will provide basic data on price response to mobile phone marketers of small and medium cities.