• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.23-32
• /
• 2017

Foam block, popularized as the self-interior goods, is susceptible to fire since the main material is the polyethylene flammable synthetic resin. However, it is widely used in homes, offices, and multi-use facilities. In order to understand the fire characteristics of the foam block, two kinds of foam blocks sold in the market (non-fire retardant and fire retardant) were evaluated according to standard of KS F 5660-1 (Reaction to fire test). In addition, the hazard analysis of the gas generated by the combustion of the specimen was performed using the FTIR gas analyzer. The cone calorimeter test showed that the ignition and flame combustion of both two specimens were burned as soon as the radiant heat blocking device was removed, and it was confirmed that the flame could become a rapid propagation factor during the fire. The analysis of the combustion gas through the FTIR gas analyzer showed that both the carbon dioxide and carbon monoxide classified as the common combustion gases and the acrolein, ammonia, and hydrogen cyanide causing serious damage to the human body were detected substantially. This study showed that a foam block product has high ignitionability and generates toxic gases. Hence, it is urgently required to establish the standards used for properly classifying the combustion characteristics of the material on the basis of the use conditions of a foam block product and to prepare the standards on the purpose of use.

• Journal of radiological science and technology
• /
• v.18 no.2
• /
• pp.87-102
• /
• 1995

The education of radiologic technology began in the regular institute of higher education in Korea in 1963. Up to now from then, our education to bring up the radiologic technologists has developed greatly in quality and quantity, and now departments of radio-technology are founded in the 16 junior colleges in March, 1995. This study was done to verify the necessity and propriety to reform the education system of radiologic technology which was run as two or three year system of college curriculum for 32 years since 1963, and to search for the method to reform in the future. We got the following results from this research. 1. In the survey, on the desirable education year for radiologic technologists, 63.9 % of professors of department of radio-technology and 63.0 % of radiologic technologists chose the 4 year system, 27.9 % of professors and 34.6 % of radiologic technologists chose the 4 year system added to graduate school. 2. In the survey, on the future development of radiologic equipments and technique, 67.2 % of professors of department of radiologic technology and 86.4 % of radiologic technologists have a view of "revolutional development". Also, on the future tasks or roles of radiologic technologists 95.1% of professors and 94.9% of radiologic technologists have a view that "They will increase". 3. On the necessity of extension of education year to 4 years from 3 years, the factor is that development of medical technique and machinery and tools, advance of qualification of radiologic technologists, enlargement and specialization of the business of the radiologic technologists, ballance of education year with other medical sciences, international competitive power and cooperation of radiologic technology, and education continuation of the graduates of department of radiologic technology. 4. They suggested that in the 4 year curriculum of department of radiologic technology, clinical medicine, quality control of radiation and radiologic equipment, related subjects to the radiologic application and computer application should be enforced and clinical practice should be extended more. 5. On the device to found the 4 year college curriculum of radiologic technology, they suggested that first, 4 year curriculum should be founded through the variety of educational year, secondly, department of radiologic technology should be founded in the 4 year health sciences college, thirdly, educational continuation of the radiologic technologists should be systematized on the basis of life-long education.

• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.30-41
• /
• 1987

The geometrical shape of a plow bottom may be the most important factor affecting the performance of a plow for a given soil and operating conditions. There are various designs of the Jaenggi (Korean plow) available commercially, which may be different from each other and from the plow (Western plow) in respect to the shape and performance. This study was intended to investigate the geometrical characteristics of Jaenggi. The coordinate digitizer equipped with 3 potentiometers was designed and manufactured for measurement of the shape of curved plane of moldboard and share. The digitizer was connected to a microcomputer having the data acquisition system. This device was used to analyze the plow bottoms of 5 differently-made Jaenggis and one cylindrical plow. The results of the study are summarized as follows: 1. It was possible to measure easily and quickly the curved plane of plow bottom and to plot the view on three major plans using the coordinate digitizer electrically connected to a microcomputer system. 2. The shape of five Jaenggi bottoms analyzed could be characterized by the cutting angle having the range of $33-42^{\circ}$, the maximum share-lift angle of $41-50^{\circ}$, and the setting angle of moldboard wing of $46-70^{\circ}$. The most critical difference of the shape factors between the Jaenggi and the plow was found in the maximum share-lift angle, the former was more than twice as much as the latter. 3. The analysis of the shape of Jaenggi bottoms showed that the share projections on 3 major plans had a varied triangle, which was quite different from that of plow bottom. Especially, it was analyzed that the shape of furrow slice for the Jaenggi had a skewed rectangle, leaving a considerable height of the ridge at the furrow bottom. 4. The dihedral angle was similar range of $30-85^{\circ}$ for the all bodies investigated, but the directional angle was somewhat different from each other. The difference in directional angle was $5^{\circ}$ for the plow, $20^{\circ}$ for the Jaenggi A and $30^{\circ}$ for the Jaenggi B. 5. Area of the spherical representation region was 0.0328 for the plow, 0.1194 for the Jaenggi A and 0.1716 for the Jaenggi B. This may indicate that the plow came close to a working surface and the Jaenggi A and the Jaenggi B departed from a working surface to a somewhat greater extent.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.27-38
• /
• 2013

Currently a number of managers exist to manage heterogeneous networks, in this situation, the NETCONF protocol for efficient network management has been proposed as a new protocol. However, the standard NETCONF protocol stack continuous improvement since the establishment but in four layers still have some problems. Especially in situations where there are multiple administrators, problems are more highlighted in operation layer. In this paper, we focus on these issues and the Operation layer has improved the efficiency and flexibility of operations among NETCONF four layers. Additionally, for the inefficiency of updates improved the device settings based on improved operation techniques. In addition, standard protocol NETCONF did not proposed content layer data structure and we propose standard technique of content layer that can generate configuration structure of devices. Improved the three techniques are applied appropriately to the NETCONF, the proposed method and the existing NETCONF was performed experiment to compare with experimental four factors. Compare key factor are four kind as maintaining the probability of network function, the reaction performance about command, the number of control packets, performance of data creation in content layer. Such factors after performing the experiment, the proposed method in this paper is superior to the existing NETCONF and there was confirmed by analysis Experimental results.

• Korean Journal of Digital Imaging in Medicine
• /
• v.17 no.1
• /
• pp.13-18
• /
• 2015

Purpose : Skip the repetitive HRCT axial scan in order to reduce the exposure of patients during chest HRCT scan, Helical Scan Data into a reconstructed image, and exposure of the patient change and visually evaluate the usefulness of the HRCT images. Materials and method : Patients were enrolled in the survey are 50 people who underwent chest CT scans of patients who presented to the hospital from January 2015 to March 2015. 50 people surveyed 22 people men and 28 people women people showed an average distribution of 30 to 80 years age was 48 years. 50 patients to Somatom Sensation 64 ch (Siemens) model with 120 kVp tube voltage to a reference mAs tube current to mAs (Care dose, Siemens) as a whole, including the lungs and the chest CT scan was performed. Scan upon each patient CARE dose 4D (Automatic exposure control, Siemens Medical Solution Erlangen, Germany) was to maintain the proper radiation dose scan every cross-section through a device that automatically adjusts the tube current of. CT scan is the rotation time of the Tube slice collimation, slice width 0.6 mm, pitch factor was made under the terms of 1.4. CT scan obtained after the raw data (raw data) to the upper surface of the axial images and coronal images for each slice thickness 1 mm, 5 mm intervals in the high spatial frequency calculation method (hight spatial resolution algorithm, B60 sharp) was the use of the lung window center -500 HU, windows were reconstructed into images in the interval -1000 HU to see. Result : 1. Measure the total value of DLP 50 patients who proceed to chest CT group A (Helical Scan after scan performed with HRCT) and group B (Helical Scan after the HR image reconstruction to the original data) compared with the group divided, analysis As a result of the age, but show little difference for each age group it had a decreased average dose of about 9%. 2. A Radiation read the results of the two Radiologist and a doctor upper lobe and middle lobe of the lung takes effect the visual evaluation is not a big difference between the two images both, depending on the age of the patient, especially if the blood vessels of the lower lobe (A: 3.4, B: 4.6) and bronchi(A: 3.8, B4.7) image shake caused by breathing in anxiety (blurring lead) to the original data (raw data) showed that the reconstructed image is been more useful in diagnostic terms. Conclusion : Scan was confirmed a continuous, rapid motion video to get Helical scan is much lower lobe lung reduction in visual blurring, Helical scan data to not repeat the examination by obtaining HRCT images reorganization reduced the exposure of the patient.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.759-769
• /
• 2015

Diode rectifiers are very popular in industry. However, they include large low-order harmonics in the input current and do not satisfy harmonic current content restrictions. To reduce the harmonics to the power system, several methods have been introduced. It is heavy and expensive solution to use passive filters as the solution for high power application. Another solution for the harmonic filter is utilization of active filter, but it is too expensive solution. Diode rectifiers with configurations using switching device have been introduced, but they are very complicated. The combined 12-pulse diode rectifier with the square auxiliary voltage supply has been introduced. It has the advantages that auxiliary circuit is simple and inexpensive compared to other strategies. The advanced auxiliary voltage supply in this thesis is presented as a new solution. When the square auxiliary voltage supply applied, the improvement of THD is 6~60[%] in whole load range. But when the advanced auxiliary voltage supply applied, it shows stable and excellent reduction effect of THD as 57~71[%]. Especially, for the case with 10[%] load factor, reduction effect of THD has little effect as 6[%] in the case of inserting a square auxiliary voltage supply. But when the proposed new solution applied, reduction effect has excellent effect as 71[%]. Theoretical analysis of the combined 12-pulse diode rectifier with the advanced auxiliary voltage supply is presented and control methods of the auxiliary supply is proposed. The reduction in the input current harmonics is verified by simulation using software PSIM.

• Informatization Policy
• /
• v.27 no.3
• /
• pp.56-81
• /
• 2020

The purpose of this research is to empirically examine the effects of motivation and skill for digital devices and the Internet on the use of online services in the severely disabled people. In addition to the general effect of digital divide, particularly for the case of severely disabled people, the effects of physical and mental inconvenience of individuals were taken into account and the moderating effect was confirmed by classifying the groups that need help with online activities and those that do not. The 2018 Digital Divide Survey data of the National Information Society Agency was used for the study. As a research method, path analysis and multi-group analysis using a sequence access model to Internet use were performed. As a result, it was confirmed that even in the case of the disabled, the motivational factor affects the skill for digital device operation and Internet use, and this access skill sequentially affects the use of online services. In particular, it was found that the effect of strategic and technical skill for internet use is the most important for the use of online services for the disabled rather than the motivation or a simple operational skill for digital devices. In addition, it was found that even in the disabled group, those requiring help in using the Internet was more passive in using the online service than the rest in the group. The results of this study suggest the need for stronger capacity for physical access as well as support in building strategic and technical skills that enhance responsibilities and protect from risks in using the Internet among the people with disabilities.

• Quality Improvement in Health Care
• /
• v.9 no.2
• /
• pp.210-228
• /
• 2002

Background: The purpose of this research was to examine the fall incidence rate and its related factors of fall in inpatients. Methods: The data were collected from the 138 fall incident reports in one tertiary hospital in Seoul from April 1st 1999 to September 30th 2001. The Fall Incident Report Form was originally developed based on that of Massachusetts General Hospital revised in 1995. And this was modified for this survey by the collaborating work of QI team including researcher and department of nursing service of this particular hospital. The contents of Fall Incident Form were general characteristics of patient. factors related to fall. types and places of fall. circumstances, nursing interventions. and outcome. Results: 1) The incidence rate of fall was 0.08% of total discharged patients and 0.081 per 1000 patient-day. This incidence rate is much lower than that of several hospitals in USA. This finding might result from the different incidence report system of each hospital. 2) The characteristics of fall-prone patient were found as follows. They were mostly over 60 years old, in alert mental status, ambulatory with some assistance, and dependent on ambulatory device. The types of diseases related high incidence rate were cerebrovascular disease(3.2), hypertension(1.6), cardiovascular disease(1.4), diabetes(1.3) and liver disease(0.6). 3) The majority of fall events usually occurred m bed. bedside(walking or standing) and bathroom in patient room. Usually they were up on their own when they fell. And there were more falls of elderly occurred during night time than day or evening. 4) 63.8% of fall events resulted in physical injuries such as fracture and usually the patients had diagnostic procedures and some treatment(ex. suture) which caused additional cost to the patients and their families. 5) The found risk factors of fall were drugs(antihypertensive drug, diuretics) and environmental factors like too high bed height, long distance of bedside table and lamp switch, and slippery tile of bathroom floor. Conclusion: Considering these results, every medical and nursing staff should be aware of the risk factors of patients in hospital, and should intervene more actively the preventive managements, specially for the elderly patients during night. Therefore, it is recommended that the development of Fall Prevention Programs based on these results.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.513-522
• /
• 2008

The fiber dispersion performance in fiber-reinforced cementitious composites is a crucial factor with respect to achieving desired mechanical performance. However, evaluation of the fiber dispersion performance in the composite PVA-ECC (Polyvinyl alcohol-Engineered Cementitious Composite) is extremely challenging because of the low contrast of PVA fibers with the cement-based matrix. In the present work, an enhanced fiber detection technique is developed and demonstrated. Using a fluorescence technique on the PVA-ECC, PVA fibers are observed as green dots in the cross-section of the composite. After capturing the fluorescence image with a Charged Couple Device (CCD) camera through a microscope. The fibers are more accurately detected by employing a series of process based on a categorization, watershed segmentation, and morphological reconstruction.

• Culinary science and hospitality research
• /
• v.16 no.1
• /
• pp.78-91
• /
• 2010

This study aims to find a way of developing the local food industry by examining CEOs who run local food restaurants. As a result of researching the local food of Daejeon and the Chungnam province, there were 106 kinds of local food. However, all the CEOs of local food restaurants were having difficulty in operating. In order to survey the local food restaurants for development devices, 450 copies of the questionnaire were distributed to man- or woman-CEOs who operate a local food restaurant in Daejeon city and the Chungnam province. Among 450 copies of the distributed questionnaire, 390 copies were collected for this study. It used a total of 370 copies as the effective samples for an empirical analysis except 20 copies with false entries among them. The result of the empirical analysis showed as follows: 1) For the recognition of the local food, there was not difference between males and females. 2) For the factor of success on the local food restaurants, both males and females answered food taste was most important. 3) For the reason why chain business of the local food restaurants was difficult, both males and females answered there were too many side dishes coming with a main dish. 4) For the way of reinforcing competitive power of the local food restaurants, most of the male respondents and all females thought there should be financial support.