• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.17-20
• /
• 2006

Passenger safety is fundamental factor in automobile. Among much equipment for passenger safety, the air bag system is the most fundamental and effective device. Beside of the front air bag system which installed on most of all automobiles, a curtain-type air bag is increasingly adapted in deluxe cars fur protecting passengers from the danger of side clash. Curtain type airbag system consists of inflator housing, fill hose, curtain airbag. Inflator housing is a main part of the curtain-type air bag system for supplying high-pressure gases to deploy the air bag-curtain. Fill hose is a passageway to carry the gases from inflator housing to each part of curtain airbag. Therefore, it is very important to design the vent holes of fill hose for good performance of airbag deployment. But, the flow information from vent holes of fill hose is very limited. In this study, we measured instantaneous velocity fields of a high-speed flow ejecting from the vent holes of fill hose using a dynamic PIV system. From the velocity Held data measured at a high frame-rate, we evaluated the variation of the mass flow rate with time. From the instantaneous velocity fields of flow ejecting from the vent holes in the initial stage, we can see a flow pattern of wavy motion and fluctuation. The flow ejecting from the vent holes was found to have very high velocity fluctuations and the maximum velocity was about 480m/s at 4-vent hole region. From the mass flow rate with time, the accumulated flow of 4-vent hole has occupied about 70% of total flow rate.

• Journal of Preventive Medicine and Public Health
• /
• v.44 no.6
• /
• pp.235-241
• /
• 2011

Electronic cigarettes (e-cigarrettes) were recently introduced and advertised as a smoking cession device in South Korea. As the social norm to quit smoking has gained hold in the country, the number of e-cigarette users is growing rapidly. This phenomenon should be urgently considered, because of the lack of research that has been conducted to examine the safety of e-cigarettes and its efficacy as a smoking cessation aid. This paper raises several public health concerns on e-cigarettes in South Korea. Uncertain regulations of the government on e-cigarettes are contributing to an increase of e-cigarette users and allowing the e-cigarette industry to circumvent existing regulations. The aggressive marketing activity of this industry is also a core factor that is responsible for the rapid increase of e-cigarette use, in particular among the youth. Following the enforcement of tobacco control, some cigarette smokers may be encouraged to purchase e-cigarettes in order to circumvent the regulations, even though the dual use of e-cigarette and cigarette may be more harmful. Until there is clear evidence of the e-cigarette’s safety, it is recommended that the industry’s marketing and promotional activities be banned and closely monitored, and public campaigns be initiated to educate the public regarding e-cigarettes.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.223-235
• /
• 1998

The recognition of the esthetics as well as their function of the teeth in the dental field is growing. Evaluating the esthetics of a tooth concerns shape, texture, and color. And among these, color has been the most difficult element to make natural expression. Color is a very subjective element affected by many different factor like light source, object, observer. Numerous efforts to quantifying color has been made. Currently the use of colorimeter and spectrophotometercolor that the color measuring device has been suggested. In this study, the normal range of the tooth color in canines, lateral incisors and central incisors for Koreans was evaluated with a modified spectrophotometer for intraoral use. The color differences in terms of teeth positions, age and area within the tooth was evaluated and comparatively analyzed. Results were as follow ; 1. In all age groups, the central incisors are most bright and least yellowish opposit to the canines are most dark and yellowish. The central incisors and lateral incisors showed the similar color patterns. 2. In the comparison between gender, it showed that in the 10' s group male have more yellowish, the 20's female have lighter and more redness, the 30's indicated more redness in female and in the 40's the lightness is more in female. 3. With aging, there was no significant change in $L^*$ and $a^*$ coordinates but a shift was in $b^*$ to yellowish in the 30' sand 40's in central incisors. Lateral incisors and canines showed a lighter and more yellowish tooth color with an irregular change of color coordinate in $a^*$. 4. In all teeth the middle and cervical portion showed close correlation with over 0.7(0.05>p) but color ($a^*$, $b^*$) showed higher correlation than lightness($L^*$). 5. It has been shown that through the regression test the cervical color could be calculated by the middle color value.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1496-1506
• /
• 2018

Organic/inorganic ultraviolet photodetector was fabricated using thermal evaporation technique. Organic/inorganic heterojunction based on thermally evaporated copper (II) acetylacetonate thin film of thickness 200 nm deposited on an n-type silicon substrate is introduced. I-V characteristics of the fabricated heterojunction were investigated under UV illumination of intensity $65mW/cm^2$. The diode parameters such as ideality factor, n, barrier height, ${\Phi}_B$, and reverse saturation current, $I_s$, were determined using thermionic emission theory. The series resistance of the fabricated diode was determined using modified Nord's method. The estimated values of series resistance and barrier height of the diode were about $0.33K{\Omega}$ and 0.72 eV, respectively. The fabricated photodetector exhibited a responsivity and specific detectivity about 9 mA/W and $4.6{\times}10^9$ Jones, respectively. The response behavior of the fabricated photodetector was analyzed through ON-OFF switching behavior. The estimated values of rise and fall time of the present architecture under UV illumination were about 199 ms and 154 ms, respectively. Finally, enhancing the photoresponsivity of the fabricated photodetector, post-deposition plasma treatment process was employed. A remarkable modification of the device performance was noticed as a result of plasma treatment. These modifications are representative in a decrease of series resistance and an increase of photoresponsivity and specific detectivity. The process of plasma treatment achieved an increment of external quantum efficiency from 5.53% to 8.34% at -3.5 V under UV illumination.

• Journal of Industrial Convergence
• /
• v.17 no.3
• /
• pp.23-29
• /
• 2019

Object recognition distinguish objects which are different from each other. But Face recognition distinguishes Identity of Faces with Similar Patterns. Feature extraction algorithm such as LBP, HOG, Gabor is being replaced with Deep Learning. As the technology that identify individual face with machine learning using Deep Learning Technology is developing, The Face Recognition Technology is being used in various field. In particular, the technology can provide individual and detailed service by being used in various offline environments requiring user identification, such as Smart Mirror. Face Recognition Technology can be developed as the technology that authenticate user easily by device like Smart Mirror and provide service authenticated user. In this paper, we present investigation about Face Recognition among various techniques for user authentication and analysis of Python source case of Face recognition and possibility of various service using Face Recognition Technology.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.877-881
• /
• 2021

Customer satisfaction is a very important factor in the Korean medical system. However, the field of medical imaging is very difficult for the general public to understand. Therefore, in this study, as a way to solve the communication problem between the medical staff and the patient, the PET/CT image was reconstructed using the Volume Rendering technique to increase patient satisfaction. VRT was performed on 360 cancer patients who had undergone PET/CT examination. As a result of a satisfaction survey on 100 patients, all 100 patients showed that the VRT image was superior to the existing image. PET/CT is not a device that observes detailed anatomical shapes, such as CT or MRI, but an image that shows a strong signal of cancer and can easily produce a VRT image. These VRT images can be expressed three-dimensionally so that the general public can easily understand them, so communication between medical staff and patients can be improved more efficiently, and it is expected that the patient's "right to know" will be satisfied.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.597-608
• /
• 2021

The control head components used in small military vessels are designed to be domestically produced, prototypes, structural analysis, and casting methods are designed and cast. The control head assembly consists of a lever, an aluminum outside cover, Middle, front gear cover, back gear cover, and a zinc worm gear. In order to reverse the design of each component, 3D scanning device was used, 3D modeling was performed by CATIA, and prototype productions were carried out by 3D printer. In order to reduce the cost of components, gating system is used by gravity casting method. The SRG ratio of 1:0.9:0.6 was set by applying non-pressurized gating system to aluminum parts, 1:2.2:2.0 and pressurized gating system to zinc parts, and the shapes of sprue, runner and gate were designed. The results of porosity were also confirmed by casting analysis in order to determine whether the appropriate gating system can be designed. The results showed that all parts started solidification after filling completely. ANSYS was used for structural analysis, and the results confirmed that all five components had a safety factor of 15 more. All castings are free of defects in appearance, and CT results show only very small porosity. ZnDC1 zinc alloy worm gear has a tensile strength of 285 MPa and an elongation of 8%. The tensile strength of the four components of A356 aluminum alloy is about 137-162 MPa and the elongation is 4.8-6.5%.

• Journal of Climate Change Research
• /
• v.6 no.2
• /
• pp.113-119
• /
• 2015

Emission from the traditional Korean fireplace, or the under-floor heating and cooking device, can contribute significantly to airborne pollutants inventories. This study has systematically measured emissions of airborne pollutants from the fireplace when used different fuels such as firewood, agricultural crop residuals, household wastes. The results show that emission factors of airborne pollutants through the primary combustion of firewood were 3.22 g/kg for TSP, 2.93 g/kg for $PM_{10}$, 2.65 g/kg for $PM_{2.5}$, 174.19 g/kg for CO, 7.77 g/kg for NO, 0.15 g/kg for $SO_2$, 40.53 g/kg for TVOC and 0.03 g/kg for $NH_3$; from burning of agricultural crop residues, 2.85 g/kg for TSP, 1.38 g/kg for $PM_{10}$, 1.14 g/kg for $PM_{2.5}$, 126.47 g/kg for CO, 12.60 g/kg for NO, 0.20 g/kg for $SO_2$, 33.73 g/kg for TVOC and 0.02 g/kg for $NH_3$; and for household wastes, 10.52 g/kg for TSP, 8.52 g/kg for $PM_{10}$, 6.23 g/kg for $PM_{2.5}$, 72.86 g/kg for CO, 11.73 g/kg for NO, 0.20 g/kg for $SO_2$, 47.10 g/kg for TVOC and 0.20 g/kg for $NH_3$.

• Journal of Digital Convergence
• /
• v.16 no.11
• /
• pp.167-175
• /
• 2018

By conducting multiple regression analysis, we analyzed the major independent factors affecting user convenience and emotional factors, and identified the important functional elements in the design of the VR device, so that the functional elements to be developed can be grasped in advance. As a result of the study, satisfaction of handling of VR bicycle and satisfaction of speed control by paddling were considered as the most important technical factors as independent factors which have the greatest influence on user convenience and emotional factor among technical satisfaction. Also, it is possible to increase the probabilities of successful design by setting a model that predicts user convenience and the emotional part from the technical factors.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.1
• /
• pp.29-33
• /
• 2019

Objectives: Bone density seems to be an important factor affecting implant stability. The relationship between bone density and primary and secondary stability remains under debate. The aim of this study was to compare primary and secondary stability measured by resonance frequency analysis (RFA) between different bone types and to compare implant stability at different time points during 3 months of follow-up. Materials and Methods: Our study included 65 implants (BioHorizons Implant Systems) with 3.8 or 4.6 mm diameter and 9 or 10.5 mm length in 59 patients. Bone quality was assessed by Lekholm-Zarb classification. After implant insertion, stability was measured by an Osstell device using RFA at three follow-up visits (immediately, 1 month, and 3 months after implant insertion). ANOVA test was used to compare primary and secondary stability between different bone types and between the three time points for each density type. Results: There were 9 patients in type I, 18 patients in type II, 20 patients in type III, and 12 patients in type IV. Three implants failed, 1 in type I and 2 in type IV. Stability values decreased in the first month but increased during the following two months in all bone types. Statistical analysis showed no significant difference between RFA values of different bone types at each follow-up or between stability values of each bone type at different time points. Conclusion: According to our results, implant stability was not affected by bone density. It is difficult to reach a certain conclusion about the effect of bone density on implant stability as stability is affected by numerous factors.