• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.233-234
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.57-63
• /
• 1998

In this paper, a design tool using continuum design sensitivity analysis (DSA) method has been developed for noise, vibration, and harshness (NVH). Design sensitivity is formulated, implemented numerically, and named SENS1. SENS1 can compute the design sensitivity using model and response files of MSC/NASTRAN of vehicle. A of real vehicle model is considered to validate SENS1. Numerical study shows SENS1 is a useful tool to improve NVH performances of vehicle body.

• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.68-72
• /
• 1998

The parameter through the motor designing program is used to predict motor response and design the motor drive circuits. The application programs such as "Saber" are often used for these. However, making the electrical model of motor for these simulation tool is uncomfortable and impossible for general users. Therefore, in this paper, we develop the "Spice" library generation program with the motor designing program "Motor Expert". This program will assist the user to make the motor library comfortablely and correctlyry comfortablely and correctly

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.683-684
• /
• 2008

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.419-419
• /
• 2000

This paper describes a requirement analysis for automotive engine design using a computer aided systems engineering tool RDD-100. Because the engine is a complex system with many subsystems, there are many needs of stakeholder throughout the life-cycle of the engine. The originating requirements have been derived from the needs and decomposed into leaf-node requirements with the tool. Many requirement errors have been detected during the decomposition process and resolved by modifying the requirements. Inconsistency problems have been also resolved with the tool, Analysis of engine requirements using RDD-100 brings clarity to engine design early in the development process.

• Journal of the Korean Society of School Health
• /
• v.11 no.2
• /
• pp.279-284
• /
• 1998

The purpose of this study was to propose the baseline data for the development of a stress measurement tool for primary school students. The data were collected from 650 students from four primary schools in the Chon-buk area from April 1 to May 30, 1995. Through a pretest and literature review a questionaire was designed with 57 stressors experienced by school children in daily life. Reliability of the tool was tested by a Cronbach's alpha and the result was ${\alpha}=.9137$. Factor analysis was applied to organize the 57 items together. As the result, 8 factors were obtained and these factors explained 40% of the variance. The 8 factors were: 1) Life events related to family, 2) Conflict related to friend & senior or junior, 3) Educational attitude of parents, 4) Own personality, 5) School life events, 6) Scolding by teacher and parent, 7) Conflict with interpersonal relationship, and 8) Change of situation.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.21 no.2
• /
• pp.215-226
• /
• 2015

Purpose: This study aimed to develop a self-assessment tool to evaluate program outcomes of nursing students in Korean nursing undergraduate education. Methods: The instrument development process consisted of literature review, focus group interviews, and item validation. A total of 117 items were analyzed through content validity testing. Data was gathered from 302 nursing students in Korea and analyzed using SPSS 21.0. Results: To construct validity, principal component analysis and Varimax rotation were used, and 12 factors, with a cumulative explanatory variance of 69.16%, were determined from 79 items. For internal consistency and reliability, Cronbach's ${\alpha}$ was .91. The half-split reliability results were .84 and .85, and the ROC curve showed an optimal cutpoint at 227. A five-point Likert scale was used for scoring. Conclusion: This instrument was found to have fair validity and reliability as a self-assessment tool for nursing student learning outcomes. Therefore, it can be used to evaluate program outcomes indirectly in nursing schools.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.389-394
• /
• 1993

Die making process is classified into design,manufacturing,polishing,assembly, and performance test. Die polishing is not a machining process by cutting edge of tool, but it is finishing by relative cutting movement under the surface contact between grinding particles and workpiece, and this process comprised 30~40% of total manufacturing hours. However, die polishing process is still performed by the skilled workers. Now a days, it is very difficult to secure skilled workers due to the hardworking environment and this situation will be getting worse in the future which has great difficulty of dies and molds industries.This process has the common problem on the elimination of tedious manual polishing among the tool making industries. Therefore this study is aimed at the development of an automatic polishing attachment which could be attached onthe spindle of CNC machine tool and controlled by the NC program data created by CAD/CAM system. As a result, this study will contribute the realization of automatic fine polishing process and improvement of quality level of dies and molds.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.69-80
• /
• 2000

Generally, die polishing is a lime consuming process, resulting in 30∼50％ of the whole die manufacturing time. However, die polishing has not been automated yet, since it needs a great deal of experience and skill. This paper describes a new development of automated system for die polishing and focuses on the successful achievements of the element techniques to realize from hand skill to automation, as followings: (1) The 5 axes polishing system by the aid of robot with 2 degrees of freedom, is developed for the application of curved surface die. (2) The CAM system realizes a 5 axes tool path control for polishing and measuring. (3) The conductive elastic tool is able to meet curved surfaces of die and gives a high efficient and quality polishing characteristics. (4) The surface roughness measurement device with noncontact laser is developed and has a high reliability without surface damage.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.108-115
• /
• 2009

Recent advances in computer technology have brought more dependence on software to train control systems. Hence, the safety assurance of the vital software running on the railway system is very critical task and yet, not many works have been done. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we have developed the static software testing tool for railway signaling, especially Fagan Inspection module and checklists supporting module. This static testing tool for railway signaling can be utilized at the assessment phase, and also usefully at the software development stage also. It is anticipated that it will be greatly helpful for the evaluation on the software for railway signalling system.