• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.91-101
• /
• 2001

This paper is to develop replacement models under minimal repair with exponential polynomial wavelet failure rate function. Wavelets have good time-frequency localization, fast algorithms and parsimonious representation. Also this study is presented along with numerical examples using sensitivity analysis for exponential polynomial trigonometric failure rate function.

• Journal of Embryo Transfer
• /
• v.29 no.2
• /
• pp.133-139
• /
• 2014

$K^+$ channels are involved in the regulation of a variety of physiological functions, including proliferation, apoptosis and differentiation, in mammalian cells. Our previous study demonstrated that the blockage of $K^+$ channels inhibits mouse early embryonic development. This study was designed to identify the effect of $K^+$ channels during bovine embryonic development. $K^+$ channel blockers (tetraethylammonium (TEA), $BaCl_2$, quinine, ruthenium red and fluoxetine) were added to the culture medium during in vitro fertilization (IVF) for 6 h to first identify the short-term effect of these chemicals. Among $K^+$ channel blockers, fluoxetine, which is used as a selective serotonin reuptake inhibitor, significantly increased the blastocyst formation rate by approximately 6% when compared to control. During the in vitro maturation (IVM) of immature oocytes and the in vitro culture (IVC) of embryos, the oocytes and embryos were exposed to fluoxetine for either a short-term (6 h) or a long-term (24 h) to compare the embryonic development in response to exposure time. The 6 h exposure to fluoxetine during IVM did not affect the blastocyst formation rate, but the rate of blastocyst formation was reduced after the 24 h exposure. On the other hand, embryonic development increased approximately 10% in both groups of embryos exposed to fluoxetine for 6 and 24 h during IVC. Taken together, fluoxetine treatment during IVF and IVC, but not IVM, enhances bovine embryonic development. These results suggest that fluoxetine-modulated signals in oocytes and embryos could be an important factor towards enhancing bovine embryonic development.

• Korean Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.413-421
• /
• 2009

Eleven lake sediment core samples were obtained and analyzed to develop a chronology using $^{137}Cs$ (in 1963) and two tephra layers (Ko-c2 in 1694 and Ta-a in 1739). Sedimentation rates estimated for the past ca 300 years in Lake Shirarutoro indicated that catchment development has influenced the shallowing process in the lake by increasing sediment production. The sediment yield under initial land-use development conditions for the first two periods was estimated as 514 tons $yr^{-1}$ from 1694 to 1739 and 542 tons $yr^{-1}$ from 1739~1963. The development of the Shirarutoro catchment intensified in the 1960s with deforestation and agriculture activity leading to an increased sediment yield of 1261 tons $yr^{-1}$ after 1963. The sediment yields after intensified land use development, such as forestry and agricultural development, were about 2 times higher than that under initial development conditions, leading to accelerated lake shallowing over the last ca 50 years. Sedimentation rates differed with location in the lake because of spatial variation in the sediment flux from the contributing rivers and their catchments. The sedimentation rates before 1963 were low in all sites except for one site close to the Shirarutoroetoro River. The sedimentation rate in 1739~1963 was accumulated mostly at the inflow of the Shirarutoroetoro River by sediment production associated with forestry for charcoal production and initial agricultural development. The sedimentation rate after 1963 increased. In particular, the southern zone of the lake near the conjunction with the Kushiro River had a high sedimentation rate, which is attributable to sediment inflow back from the Kushiro River during floods.

• KDI Journal of Economic Policy
• /
• v.39 no.2
• /
• pp.25-51
• /
• 2017

This paper employs an Overlapping Generations Model to quantify the impacts of Korea's demographic transition toward an older population on the total output growth rate. The model incorporates the projected population through 2060 according by Statistics Korea. The effects of the low fertility and increased life expectancy rates are studied. The model is considered suitable for analyzing the effects of demographic changes on the Korean economy. Under the assumption that the TFP growth rate will not slow considerably in the future, remaining at 1.3% per annum, the gross output growth rate of the Korean economy is projected to slow to 1.1% per annum in the 2050s, from 4.0% in the 2000s. The shrinking workforce due to the decline in fertility plays a significant role in the deceleration of the Korean economy. The increased life expectancy rate is expected to mitigate the negative effect, but the magnitude of its effect is found to be limited.

• Journal of Information Display
• /
• v.5 no.3
• /
• pp.1-7
• /
• 2004

We developed a novel frame interpolation method to interpolate a frame between two successive original frames. Using this method, we are able to apply a double-rate driving method instead of an impulse driving method where a black frame is inserted between two successive original frames. The double-rate driving method enables amelioration of the motion blur of LCDs caused by the characteristics of human vision without reducing the luminosity of the whole screen. The image quality of the double-rate driving method was also found to be better than that of an impulse driving method using our motion picture simulator and an actual panel. Our initial model of our frame interpolation method consists of motion estimation with a maximum matching pixel count estimation function, an area segmentation technique, and motion compensation with variable segmentation threshold. Although salt and pepper noise remained in a portion of an object mainly due to inaccuracy of motion estimation, we verified the validity of our method and the possibility of improvement in hold-type motion blurring.

• International Journal of Concrete Structures and Materials
• /
• v.19 no.1E
• /
• pp.25-32
• /
• 2007

The fracture energy evaluated from the previous experimental results can be simulated by using the modified singular fracture process zone (S-FPZ) model. The fracture model has two fracture properties of strain energy release rate for crack extension and crack close stress versus crack width relationship $f_{ccs}(w)$ for fracture process zone (FPZ) development. The $f_{ccs}(w)$ relationship is not sensitive to specimen geometry and crack velocity. The fracture energy rate in the FPZ increases linearly with crack extension until the FPZ is fully developed. The fracture criterion of the strain energy release rate depends on specimen geometry and crack velocity as a function of crack extension. The behaviors of micro-cracking, micro-crack localization and full development of the FPZ in concrete can be explained theoretically with the variation of strain energy release rate with crack extension.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.304-305
• /
• 2018

Development of waterproof methods and materials resulted in the huge changes in waterproof construction materials. In consequence, the construction-standard-production-rate underwent overall revision in 2018. Especially, from the development of the specification standard and construction methods, the waterproof construction which had lower applicability in the existing construction production rate was revised. The construction methods which did not have applicability were removed. In addition, as there was a material difference based on parts, the constructionstandard-production-rate was revised by distinguishing vertical part and floor. Furthermore, by suggesting more clear work extent, the practicability in creating the standard for calculation of the estimated price in the construction field will increase.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2845-2849
• /
• 2008

Long Term Asset Management(LTAM) means a plan developed by using LCM(Life Cycle Management) process for optimum life cycle management of significant plant assets at each plant across the fleet. As a part of development of LTAM Strategies on nuclear turbines, a method so as to determine the future failure rates for low pressure turbine facilities at a nuclear plant was studied and developed by using both plant specific and industry-wide performance data. INPO's EPIX data were analyzed and some failure rate evaluation values considering preventive maintenance practices were calculated by using EPRI's PM Basis software. As the result, failure rate functions applicable to a priori and a posteriori replacement of low pressure turbines at a nuclear plant were developed and utilized in an assessment of economics of LCM alternatives on the nuclear turbine facilities in the respects of 40-year and 60-year operation bases.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.959-959
• /
• 2020

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.353-364
• /
• 2020

Recently in Korea, soybean harvesting has been delayed due to rainfall during the harvesting season, resulting in a reduction in yield and seed quality. This study was conducted to analyze the changes in yield and seed quality during delayed harvest with rainfall treatment using different harvesting methods, including field harvesting and polyethylene film covering after cutting fully-matured soybean plants (PE covering after cutting), with two major Korean soybean cultivars (Glycine max L), Pungsannamulkong and Daewonkong. The shattering rate of Pungsannamulkong, which is higher than that of Daewonkong, increased up to 41.8% when the harvest was delayed for 40 days without rainfall treatment by harvesting with PE covering after cutting. The weight of 100 seeds tended to decrease slightly as harvesting was delayed. When Daewonkong was harvested using the PE covering after cutting method with rainfall treatment, the yield decreased to the lowest level with a 0.8 kg ha^-1 daily reduction rate. Pungsannamulkong showed the lowest yield when harvested using PE covering after cutting without rainfall treatment with a 3.4 kg ha^-1 daily reduction rate. The infected seed rate increased according to the harvest delay in both cultivars, and significant differences were observed according to rainfall treatment and harvesting method. The germination rate was maintained above 95% even after 40 days of delayed harvest if there was no rainfall treatment. However, with rainfall treatment, the germination rate was significantly lowered as harvesting time was delayed. In the field harvesting with rainfall treatment, the germination rate decreased to 77.2% for Daewonkong and 76.5% for Pungsannamulkong after 40 days of harvest delay. For the 100-seed weight, effects of individual treatments and interactions between treatments were not observed. In contrast, the effect of interactions between treatments on the shattering rate was significant in both cultivars, indicating that the shattering rate had the greatest impact on the yield changes during delayed harvest.