• Environmental Analysis Health and Toxicology
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2009

Effects of salinity and standard toxic metals on fertilization and embryo development rates were investigated in the sea urchin, Hemicentrotus pulcherrimus. Spawning was induced by injecting $1{\sim}2$ mL of 0.5 M KCl into the coelomic cavity. Males released white or cream-colored sperms and females released yellow or orange-colored eggs. The fertilization rate was below 30% when salinity was 20 psu and lower, but was almost above 90% when salinity was 25 psu and higher. The embryo development rate was below 60% when salinity was 25 psu and lower, but was above 80% when salinity was between 30 and 35 psu. The fertilization and embryo development rates in the control condition(not including Cu and Cd) were greater than 90%, but decreased a high negative correlation with the increasing of Cu(r=-0.80, r=-0.78) and Cd(r=-0.90, r=-0.82) concentrations, respectively. The fertilization and embryo development rates were significantly inhibited in the addition of Cu($EC_{50}$=17.30 ppb, $EC_{50}$=10.32 ppb) and Cd($EC_{50}$=364.57 ppb, $EC_{50}$=244.04 ppb), respectively. These results suggest that salinity concentrations for successful fertilization and normal embryogenesis of H. pulcherrimus are above 25 psu and 30 psu, respectively, and the biological assays of fertilization and embryo development rates using H. pulcherrimus are useful methods for the ecological toxicity test of marine pollution elements.

• Fire Protection Technology
• /
• s.19
• /
• pp.22-28
• /
• 1995

The rate of heat release is probably the single most important measure of fire hazard. Several tech-niques were developed for the measurement of rate of heat release, but were not suitable for fire test-ing purpose. Recently the application of oxygen consumption principle made it possible to development of well-characterized heat release rate measurement apparatus, the furniture calorimeter for large-scale fire tests and the cone calorimeter for bench-scale fire tests. The cone calorimeter can be used to determine the ignitability as well as heat release rate and smoke development, mass loss rate, combustion gas production etc. from burning materials. Thus, test method using cone calorimeter, an internationally recognized and accepted for the evalua-tion of fire properties, is a very promising tool for combustion study on various kind of materials and products.

• Journal of National Security and Military Science
• /
• s.15
• /
• pp.117-151
• /
• 2018

The development of local defense parts has played a role a pure function such as maintenance of stable procurement source of military goods, provision of timely supply, establishment of self-defense base, creation of import substitution effect considering the whole life-cycle cost, reduction of foreign currency and protection of domestic defense industry. However, as the development success rate is deteriorating, it is time to analyze the related policies and improve the system. In order to improve the success rate of development of parts for the defense sector, it is necessary to unify the separated policies by the development-related departments and strengthen the policy support for the development companies to actively participate in the development. In addition, it is necessary to improve the paradigm for the selection of development items and change the authority of selecting development items and to delegate authority to create synergies. Parts localization development policy improvement is military support side it will contribute to strengthening defense power management by organically combining with technological development aspect and economical aspect. Development items will be linked to defense exports, which will have a remarkable effect on sales growth and job creation effects. The development of local defense parts is spreading.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.31-38
• /
• 2021

This study contributes to the existing literature and tries to analyze the validity of the Fisher hypothesis in the Philippines. Using monthly data from January 1995 to December 2020, the empirical analysis used the Engle-Granger and Johansen cointegration testing technique. The correlation coefficient suggests a strong positive association. All things being equal, a rise in inflation leads to a rise in the nominal interest rate. The unit-root tests show that inflation and the nominal interest rate are both stationary. Based on both Engle-Granger and cointegrating regression Durbin-Watson tests, the nominal interest rate and inflation are cointegrated. Likewise, the results from Johansen cointegration indicate that there exists a long-run relationship between the variables. However, we rejected a one-to-one relationship between nominal interest rate and inflation. The error correction term coefficient (ECM) shows that it is statistically significant suggesting that the nominal interest rate adjusts to the inflation rate with a lag. The Pair-wise Granger Causality test reported a bi-directional causal relationship between nominal interest rate and inflation. Inflation targeting has been the monetary policy framework of choice for most central banks. In essence, the conclusions of this study are useful to central banks because they help them better comprehend the long-run equilibrium relationship between the nominal interest rate and inflation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8439-8443
• /
• 2016

Background: Breast cancer is the most common malignancy in women worldwide and its incidence is generally increasing. In 2012, it was the second most common cancer in the world. It is necessary to obtain information on incidence and mortality for health planning. This study aimed to investigate the relationship between the human development index (HDI), and the incidence and mortality rates of breast cancer in the world in 2012. Materials and Methods: This ecologic study concerns incidence rate and standardized mortality rates of the cancer from GLOBOCAN in 2012, and HDI and its components extracted from the global bank site. Data were analyzed using correlation tests and regression with SPSS software (version 15). Results: Among the six regions of WHO, the highest breast cancer incidence rate (67.6) was observed in the PAHO, and the lowest incidence rate was 27.8 for SEARO. There was a direct, strong, and meaningful correlation between the standardized incidence rate and HDI (r=0.725, $p{\leq}0.001$). Pearson correlation test showed that there was a significant correlation between age-specific incidence rate (ASIR) and components of the HDI (life expectancy at birth, mean years of schooling, and GNP). On the other, a non-significant relationship was observed between ASIR and HDI overall (r=0.091, p=0.241). In total, a significant relationship was not found between age-specific mortality rate (ASMR) and components of HDI. Conclusions: Significant positive correlations exist between ASIR and components of the HDI. Socioeconomic status is directly related to the stage of the cancer and patient's survival. With increasing the incidence rate of the cancer, mortality rate from the cancer does not necessariloy increase. This may be due to more early detection and treatment in developed that developing countries. It is necessary to increase awareness of risk factors and early detection in the latter.

• Journal of Radiation Protection and Research
• /
• v.47 no.1
• /
• pp.30-38
• /
• 2022

Background: Residential areas have some factors on the external exposure of residents, who usually spend a long time in these areas. Although various survey has been carried out by the government or the research institutions after the Fukushima Daiichi Nuclear Power Plant accident, the mechanism of radiocesium inventory in the terrestrial zone has not been cleared. To better evaluate the radiation environment, this study investigated the temporal changes in air dose rate and ¹³⁷Cs inventories (Bq/m²) in residential areas and agricultural fields. Materials and Methods: Air dose rate and ¹³⁷Cs inventories were investigated in residential areas located in an evacuation zone at 5-8 km from the Fukushima Daiichi Nuclear Power Plant. From December 2014 to September 2018, the air dose rate distribution was investigated through a walking survey (backpack survey), which was conducted by operators carrying a γ-ray detector on their backs. Additionally, from December 2014 to January 2021, the ¹³⁷Cs inventories on paved and permeable grounds were also measured using a portable γ-ray detector. Results and Discussion: In the areas where decontamination was not performed, the air dose rate decreased faster in residential areas than in agricultural fields. Moreover, the ¹³⁷Cs inventory on paved surfaces decreased with time owing to the horizontal wash-off, while the ¹³⁷Cs inventory on permeable surfaces decreased dramatically owing to the decontamination activities. Conclusion: These findings suggest that the horizontal wash-off of ¹³⁷Cs on paved surfaces facilitated the air dose rate decrease in residential areas to a greater extent compared with agricultural fields, in which the air dose rate decreased because of the vertical migration of ¹³⁷Cs. Results of this study can explain the faster environmental restoration in a residential environment reported by previous studies.

• Journal of Embryo Transfer
• /
• v.23 no.3
• /
• pp.167-175
• /
• 2008

This study was performed to investigate the result that in-vivo or in-vitro embryos of Hanwoo cows were transferred to Holstein cows. Seventeen Hanwoo cows were used as donors for production of in-vivo embryos and fresh hanwoo in-vivo embryos were transferred to 1,150 Holsteins. And 2 embryos were transferred to 188 Holstein recipients to produce twin calves. Diagnosis on pregnancy was performed by rectal palpation at $60\sim90$ days after transfer. The pregnancy rate of Holstein recipients was 55.8% after transfer with Hanwoo in-vivo embryos and 38.2% after transfer with Hanwoo in-vitro embryos. The delivery rate of pregnant Holstein recipients was 88.4% after transfer with Hanwoo in-vivo embryos and 75.6% after transfer with Hanwoo in-vitro embryos. The rate of delivery of Holstein recipients transferred with two Hanwoo embryos was 36.2% and the rate of twin production was 25.9%. The rate of twin production by embryo transfer with in-vivo embryos was 30.4%, whereas the fate with in-vitro embryos was 15.6%. The pregnancy rate according to the grade of corpus luteum of Holstein recipients transferred with Hanwoo in-vitro embryos was 41.5 and 36.0% for A and B grade, respectively. The pregnancy rate according to the transfer in site in the uterine lumen of recipients was 40.9 and 32.7% for anterior and middle site, respectively. The pregnancy rate according to day of embryo transfer after estrus of recipients was 45.5, 38.8 and 39.7% for day 6, day 7 and day 8, respectively. There was difference of pregnancy rate according embryo transfer technician ($30.5\sim45.8%$) individual dairy farm ($21.1\sim51.0%$). These results are supposed to indicate that the rate of pregnancy after transfer with Hanwoo embryos to Holstein recipients was similar to that within the same breed, and consequently that this method would be beneficial to enhance the productivity in Hanwoo reproduction.

• Reproductive and Developmental Biology
• /
• v.28 no.4
• /
• pp.221-226
• /
• 2004

The present study was performed to investigate the effects of in vitro maturation (IVM) and in vitro fertilization (IVF) duration on the development of Korean Native Cattle embryos. The time of blastocyst formation and the quality of blastocysts based on cell numbers were examined. The cleavage rate increased with the length of IVF duration in the groups of 18-hr IVM, but was constant in the groups of 24-hr IVM. The development rate to the 8-cell stage was significantly higher in the IVM 18: IVF 20 group than in the IVM 24: IVF 24 group. The development rate to the blastocyst stage was highest in the IVM 18: IVF 20 group, significantly different from that of the IVM 18: IVF 16, IVM 24: IVF 20 and IVM 24: IVF 24 group. The time of blastocysts formation tended to be shorter when IVM and IVF duration were decreased. The number of inner cell mass, trophoblast and the total cells were significantly higher in the IVM 18: IVF 16 group than in the IVM 24: IVF 24 group (P<0.05). These results demonstrated that the IVM and IVF duration should be adequate for the efficient production of bovine embryos, and it might particularly be essential to determine the proper combination of IVM and IVF duration.

• Journal of Environmental Impact Assessment
• /
• v.22 no.1
• /
• pp.79-87
• /
• 2013

The purpose of this study is to establish PM-10 management manual for developing large scale sites by assessing the status of PM-10 reduction at ongoing large scale development sites. After analyzing the meteorological conditions and air quality characteristics of Sihwa MTV development site, ISCST3 (Industrial Source Complex Short Term Model 3) was implemented to predict PM-10 generation. The outcomes of ISCST3 modelling were utilized for verification of site survey data. As a result of applying air pollution modeling, the diffusion rate of PM-10 decreases according as the wind speed decreases. And the emission rate of PM-10 increase is linear to the concentration of PM-10. The reduction target of PM-10 can be derived quantitatively from the difference between the forecasted emission rate and the permissible emission limit of PM-10. The assessment of PM-10 characteristics which is deduced from ISCST3 and site survey can be practically applied to accomplish environmentally acceptable air quality manual for large scale development sites.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.14-20
• /
• 2018

An estimation law of air mass flow rate for high speed engine control is presented. The variables of mass estimation equations are modified to measurable variables which can be obtained during flight, and the effectiveness of each variable to the estimation accuracy is evaluated. The equation is modified to a simplified form, and the uncertainty is evaluated. In addition, reference data for the selection of estimation methods is suggested by considering the sensitivity analysis of sensor error.