• 대한안전경영과학회지
• /
• 제11권4호
• /
• pp.161-168
• /
• 2009

Ubiquitous application is in need of high-level technology to meet various requests for ubiquitous service. In order to adopt ubiquitous technology in not only pilot projects but also regional services, many projects like u-City are implemented in and outside the country. RFID has been known as one of the important technology to provide with core benefits of Ubiquitous services. Because each band of RFID technology has merits and demerits concurrently, single-band RFID system has limitations for various RFID services. Thus, we developed dual-band RFID system enable to provide with 13.56MHz and 2.45GHz RFID service at the same time to compensate the shortage of single-band RFID system. Also we have considered the way that the firmware would control signals without collision, studied battery life and range for tag, and made hardware for dual-band RFID service.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.73-81
• /
• 2006

A commercial diesel engine was converted into a dedicated natural gas engine to reduce the exhaust emissions in a retrofit of a diesel-fueled vehicle. The cylinder head and piston were remodeled into engine parts suited for a spark ignition engine using natural gas. The remodeling of the combustion chamber changed the compression ratio from 21.5 to 10.5. A multi-point port injection(MPI) system for a dedicated natural gas engine was also adopted to increase the engine power and torque through improved volumetric efficiency, to allow a rapid engine response to changes in throttle position, and to control the precise equivalence ratio during cold-start and engine warm-up. The performance and exhaust emissions of the retrofitted natural gas engine after remodeling a diesel engine are investigated. The emissions of the retrofitted natural gas engine were low enough to satisfy the limits for a transitional low emission vehicle(TLEV) in Korea. We concluded that a diesel engine can be effectively converted into a dedicated natural gas engine without any deterioration in engine performance or exhaust emissions.

• 한국분무공학회지
• /
• 제10권1호
• /
• pp.43-52
• /
• 2005

The effect of fuel injection spray on engine performance has been known as one of the major concerns for improving fuel economy and reducing emissions. In general, reducing the spray droplet size could prevent HC emission in gasoline engine. As far as PFI (Port Fuel Injection) gasoline engine is concerned, the mixture of air and fuel may not be uniform under a certain condition, because breakup and production of spray droplets are made in a short distance between the fuel injector and intake valve. This study, by constituting PFI gasoline spray system, was performed to study the transient spray characteristics and dynamic behavior of droplets from 2hole 2spray type injector used in DOHC gasoline engine. Mean droplet size and optical concentration in accordance with various conditions were measured by LDPA and CCD camera. Through this study, the variation of drop size and optical concentration could be used for understanding the behavior of unsteady spray was declared and the existing the small droplets between each pulse spray could be estimated caused to the development of wall film was conformed.

• 수산해양기술연구
• /
• 제40권2호
• /
• pp.144-148
• /
• 2004

해저에 설치된 파이프에서 분출되는 기포에 의해 형성된 강한 수평압력분포를 이용하여 선박을 신속 하고 정밀하게 유도, 정박시키는 도선시스템으로 항구, 협수로, 해협 등과 같이 복잡한 수상, 수중 장애물 지역에서 선박을 신속하고 정밀하게 유도함과 동시에 협소한 부두에 안전하게 선박을 정박시키기 위하여 본 도선 시스템을 고안하였다.

• 한국항해학회지
• /
• 제24권3호
• /
• pp.157-165
• /
• 2000

When the GPS system was come to the operation, the U.S Coast Guard initiated development of differential GPS system based on a marine radiobeacon. It has rapidly been spread out to many countries. DGPS equals to P(Y) code in a positioning accuracy. USA has recently determined to expand the coverage of DGPS to inland in order to install a nationwide DGPS chain. Korea is under processing for improving the DGPS as a nationwide positioning system. Before expanding the service area inside Korea, we need to verify the relation between the field strength and DGPS accuracy for the service area. The Japanese DGPS data is received in the southern Part of the Korean peninsula. The Korean DGPS was not a complete system, so we selected the Japanese DGPS data as a model for the study. This paper investigate accuracy and reliability characteristics of RBN/DGPS over the effective service area. Through the experimental and simulation study, we obtained the reliable and stable positioning accuracy in the southern part of the Korean peninsula. In addition, the characteristics of RBN/DGPS were examined in the land over the effective coverage from Japan. The results would be a basic reference to research the RBN/NDGPS in Korea.

• 한국항해학회지
• /
• 제21권3호
• /
• pp.67-74
• /
• 1997

This paper described the method and the result of making a dynamic fiber optic gyrocompass measuring the heading angles of ships by processing the output signal from a constant rotating fiber optic sensor and also showed the measurement to test the performance of our system. Considerig an economical view we designed and ordered a cheap medium grade fiber densors increased not fiber length but the diameter of a fiber sensing loop. The scale factor and noise was 267mV/deg/s and 2 deg/hr/$\sqrt{Hz}(1{\sigma})$, respectively. We made the dynamic fiber optic gyrocompass by this sensor. We measured the heading angles in an arbitrary direction to evaluate the accuracy of our system and the root mean square error was $0.4^\circ$. Moreover, we measured the angles ineach direction of $45^\circ$. successive rotation to know whether this system has distoritions in a specific direction or not and the root mean square error in this case was $0.5^\circ$.

• 한국정보통신학회논문지
• /
• 제22권6호
• /
• pp.888-894
• /
• 2018

본 논문에서는 연선의 성능 측정을 위한 혼합 모드 산란계수 측정시스템을 제안하였다. 연선은 균형 형태의 소자로써 일반적으로 동축 형태로 구현된 네트워크 분석기를 이용하여 특성 측정이 불가능하다. 이때, 발룬을 이용하여 균형 신호와 불균형 신호 간 변환을 통해 측정이 가능하지만 측정 주파수 대역폭이 제한되는 문제가 있다. 제안하는 시스템은 발룬을 사용하지 않고 4포트 벡터 네트워크 분석기와 설계한 고정구를 이용하여 혼합모드 산란계수를 측정하여 연선의 성능을 측정한다. 제안하는 시스템을 이용하여 상용 이더넷 케이블의 성능을 측정해보고 발룬의 이용한 결과와 비교해 보았다. 이를 통해 제안하는 시스템을 이용해 연선의 성능 측정이 가능함을 확인하였다.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.217-230
• /
• 2012

To look at Korea trade environment, as increasing the quantity of goods transported in North-East Asia and deepening national competitive, information-oriented logistics environment is needed. That means it is automated work process and can provide value-added service. To do this, logistics business can be efficiently handled through "Electronic Means for the Clearance of Ships" and electronically data processing. Also, by increasing the risk of international terrorism, regulation regarding to logistics security has strengthened around the advanced country, such as USA and EU, etc. or international organization, such as IMO, ISO, etc.. Furthermore, because trade and logistics environment is changing and security becomes more important in logistics area, movement or status information of goods within the port or in entry in/out becomes more and more be needed in real time. In case cross-border logistics activities, international cooperation or agreement between countries is very important. However, different opinions much happened on defining the interface. If to follow one format or type using at a specific country or organization, it was occurred to difficulty in respect of interoperability as well as additional costs or time. Therefore, this paper proposes common interface model to exchange information for the efficient global SCM for using by the output of Korea R&D project, "National Logistics Standardization System Development".

• 한국진공학회지
• /
• 제22권2호
• /
• pp.45-54
• /
• 2013

맥동관형 크라이오펌프 개발 사업 2단계를 맞아 우성진공(유)을 중심으로 상용화 시제품 개발이 성공적으로 끝나가고 있다. 최종 크라이오펌프 개발품은 흡기구 직경(내경) 16.5 (14) 인치에 질소 배기속도 3,600 L/s 이상을 목표로 하고 있다. 개발품의 성능확인을 위해 우선 몬테카를로 계산을 통해 배기속도를 예측하고 구조설계를 최적화했으며 이를 바탕으로 가공 조립된 크라이오펌프 시제품의 성능을 표준화된 장치에서 표준화된 절차를 통해 평가하여 설계 목표값과 비교했다. 시제품의 질소 배기속도는 4,600 L/s로 측정되어 설계값과 잘 일치하였으며 개발목표를 훨씬 상회하였다.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.51-59
• /
• 2000

In-cylinder spray flow motion plays an important in the adjustment of mixture preparation with a fundamental spray characteristics and in-cylinder flow field well in direct-injection gasoline engine. In this study, the fundamental spray characteristics such as mean drop size, velocity distribution, spray angle were measured and in-cylinder spray flow motion was visualized in order to optimize intake port, piston top land and combustion chamber shapes in the development stage of mass-produced G야 engine. For these experiments, the PDPA measurements and Mie scattering technique were used for detailed spray characteristics and in-cylinder spray motions were obtained by use of ICCD camera through the single-cylinder optical engine. From the experimental results, the test injector shows a good low-end linearity between the dynamic flow and fuel injection pulse width and the fuel spray of 20mm or less in SMD with good spray symmetry. In addition, the in-cylinder tumble flow has more effect on the homogeneous mixture formation than that of in-cylinder swirl flow at early injection mode and the in-cylinder swirl flow plays a better role of stratified mixture preparation than tumble flow at late injection mode.