• 한국항해학회지
• /
• 제3권1호
• /
• pp.47-77
• /
• 1979

A microwave Navigational Aid system is suggested suitable for fishing boats too small to be equipped with Radar or Radio-Direction-Finder. The system proposed here is similar to that of Talking-Beacon developed in Japan, but the distinctive modification proposed is that an increase of sixteen times in peak transmitting power, thus an accompanying increase of coverage, is achieved with the same mean transmitting power as that of Japan without sacrificing the clearness of azimuth information, by adopting a pulse repetition modulation instead of pulse width modulation as in Japan system. An experimental land station transmitter of transmitting frequency of 9, 370MHz and of peak power of 35kw with a microwave beam of 1 degree in horizontal width and 7 degrees in vertical width rotating once every three minutes, and also an experimental receiver of 20-dB in sensitivity and of an assumed cost of 100 dollars, operated by a 12 volts battery source are made, and the sail test results are reported showing that a bearing infromation of an accuracy of within two degrees can be obtainable every three minutes at a distance of as far as 24 miles from the transmitter if the transmitter is located as high as 100 meters above sea-level.

• Journal of Biosystems Engineering
• /
• 제29권5호
• /
• pp.433-440
• /
• 2004

Worldwide consumption of vegetable soybean has been increasing recently, but in the process of vegetable soybean production, threshing and separation work accounts fur about $80\%$ of overall labor. Therefore, developing of the vegetable soybean thresher is necessary to reduce the cost of labor. The main objective of this study is to acquire the basic in-formations for design of the vegetable soybean thresher which is suitable for domestic circumstances. We made the experimental system to investigate the threshing and separating performance at the several speeds of threshing cylinder and separating blower according to the kinds of threshing tooth. The result are as follows; Threshing performance of vegetable soybean thresher was shown as the best in case the threshing tooth made of rubber which has the 80 of Shore hardness was used at the circumference speed of cylinder of 5.8$\~$8.1m/s. Also separating cleaning performance of vegetable soybean thresher was shown as the best at more than 1,300 rpm of blower speed and $60\~80\%$ of opening ratio of suction port.

• 대한조선학회논문집
• /
• 제47권5호
• /
• pp.703-708
• /
• 2010

Recently, the development of the Marina port is determined as a national plan, and a variety of leisure boats and facilities on the field has been of critical interest. In particular, yachts are designed and produced mostly at small shipbuilding companies and research institute. The regulation and historic data, however, about the safety of structure are not readily available. Therefore, it is required to evaluate the strength of ship structure. This paper deals with the estimation of local strength of 40 feet sailing yacht by using finite element analysis. The forebody, mast and connection parts of a FRP yacht structure are evaluated. In addition, the results are compared with the regulation of Lloyd's register and Korean register.

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.69-74
• /
• 2006

Residual stresses are introduced in aluminum cylinder head during quenching at the end of the T6 heat treatment process. Tensile residual stress resulted from quenching is detrimental to fatigue behavior of a cylinder head when it is overlapped with stresses of engine operation load. Quenching simulation has been performed to assess the distribution of residual stress in the cylinder head. Analysis revealed that in-homogeneous temperature distribution led to high tensile residual stress at the foot of the long intake port, where high stresses of engine operation load are expected. Measurements of residual stress have been followed and compared with the calculated results. Results successfully proved that high tensile residual stress, which was large enough to accelerate fatigue failure of the cylinder head, are formed during quenching process at the end of heat treatment at the same critical position. Effect of quenching parameters on the distribution of residual stress in cylinder head has been investigated by choosing different combination of heat treatment parameters. It was demonstrated that changes of quenching parameters led to more homogeneous temperature distribution during cooling and could reduce tensile residual stress at the critical region of the cylinder head used in this study.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.8-13
• /
• 2003

Soil, ground water, and sea bed are exposed to a continuous accumulation of polluted materials, causing serious environmental damage. It has been reported that such pollution causes a massive mortality of fish stock in rivers due to the resuspension of toxic chemicals, occurring during strong wind conditions. Therefore, it becomes apparent that there is an immediate demand for the restoration treatment of polluted river bed (or sea bed) sediment layers. Pollution levels of major rivers and ports, such as Paldang, Kyungan rivers, and Masan port, are becoming of great public concern, and are posing a serious environmental threat. In particular, the pollution of the Shi-hwa river has become a nation wide issue for the last few years. In spite of such public concern, the pollution levels of such rivers or ports are worsening everyday. In this study, an environmentally sound engineering package is introduced that helps to restore the polluted river bed or sea bed sediments. This engineering package consists of a suction facility, followed by a series of mechanical, chemical, and biological treatment units. The suction facility is designed to minimize secondary pollution that occurs from the resuspension of toxic materials during suction. The sea bed cleaning engineering package is designed to be installed on the top of a floating barge. Such a combination of environmental plant and shipbuilding technology provides a cost-effective solution, minimizing the transportation between suction and treatment facilities.

• 한국농촌건축학회논문집
• /
• 제14권4호
• /
• pp.37-45
• /
• 2012

The villages in island were established overcoming natural environment through Shamanism and changed by developing various industrials like transportation. Gapa Island located in southern part of Jejudo is flat topography different from the other islands. The purpose of this study is to clarify characteristics on transformation of community space in Gapa Island. For purpose, community spaces in Gapa Island are researched such as establishment, function, change, and use of community space. Spatial components in Gapa Island are like as spaces in faith, residential area, area for production, commercial zone, community space, education facilities, public offices, port, and roads. The methods of this study are literature research and interview survey for residents in Gapa Island. The results are as followings: First, community space is in charge about social, industrial, and religious function. Second, for traditional spaces separated for male and female, demarcation of space does not exist in industrial side but the demarcation has still been exist in religious side. Finally, by development of tourism new community space has been charge in festival function as well as function of space like agora for meeting with people freely, which is relatively various in function of community space in social side. Role of the dock for ship, main transportation of island, is being increasing as square.

• Journal of Forest and Environmental Science
• /
• 제30권4호
• /
• pp.315-321
• /
• 2014

Forest timber production potential of any site is oftentimes measured quantitatively by site index, which is defined as dominant height of a particular stand at a specified age. A site index was developed for estimating site quality of monoculture Pinus caribaea plantations in southwestern Nigeria using a base age of 25 years. Dominant height data were collected from 60 Temporary Sample Plots (TSPs) of $20{\times}20m$ in plantations of 15 to 37 years. Linear and non-linear models as been widely applied in quantitative forest measurements were fitted to dominant height-age data and the best site index equation is : $SI=Exp^{(InHd-23.495(A^{-2}-0.04)}$. The site index curves constructed for the three sites (Omo Forest Reserve - OFR (J4), Oluwa Forest Reserve - OLFR and Shasha Forest Reserve - SFR) across the southwestern Nigeria using the chosen equation revealed that a 15 year old Pinus caribaea in the study area attained average dominant heights of 25, 22 and 21 m in OFR (J4), OLFR and SFR respectively. The site index equation and curves proffer veritable insight into better silvicultural options and management practices for the future plantations suitable sites.

• 한국분무공학회지
• /
• 제6권1호
• /
• pp.25-34
• /
• 2001

Several efforts to meet the exhaust gas regulation have been undertaken by many researchers in recent years. Main researches are on development of design techniques of intake port and combustion chamber, atomisation of fuel and precise control of air-fuel ratio, post-treatment of exhaust gas and so on. Engine technology is changed from PFI to GDI to correspond with exhaust gas regulation. GDI technique makes it possible to preserve lean air-fuel ratio and control accurate air-fuel ratio. Nevertheless, It is not cleared that information of spray characteristics and atomization process are very dependent on fluctuation of pressure and change of temperature in intake stroke. In this study, a constant volume combustion chamber is manufactured to investigate various fluctuations of in-cylinder pressure for injection duration. It is taken photographs of injection process of conventional GDI injector using PMAS. Then, it was verified experimently that ambient conditions as temperature and pressure of combustion chamber have effects on process of spray growth and atomization of fuel.

• 한국항해학회지
• /
• 제20권1호
• /
• pp.27-46
• /
• 1996

Vessles in the world merchant fleet generally operate in either liner or bulk trade. The supply and the demand trend of general cargo ship are both on the ebb, however, those trend of tankers and containers are in slight ascension. Oil tankers are so far the largest single vessel type in the world fleet and the tanker market is often cited as a textbook example of perfect competition. Some shipping statistics in recent years show that there has been a radical fluctuation in spot charter rate under easy charterer's market. This implys that the proper scheduling of tankers under spot market fluctuation has the great potential of improving the owner's profit and economic performance of shipping. This paper aims at developing the TS-DSS(Decision Support System for Tanker Scheduling) in the context of the importance of scheduling decisions. The TS-DSS is defined as the DSS based on the optimization models for tanker scheduling. The system has been developed through the life cycle of systems analysis, design, and implementation to be user-friendly system. The performance of the system has been tested and examined by using the data edited under several tanker scheduling scenarios and thereby the effectiveness of TS-DSS is validated satifactorily. The authors conclude the paper with the comments on the need of appropriate support environment such as data-based DSS and network system for succesful implementation of the TS-DSS.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.640-653
• /
• 2015

In order to develop the challenging process of placing Aids to Navigation (AtoN), we propose performance measures which quantifies the effect of such placement. The best placement of AtoNs is that from which the navigator can best recognize the information provided by an AtoN. The visibility of AtoNs depends mostly on light sources, the weather condition and the position of the navigator. Visual recognition is enabled by achieving adequate contrast between the AtoN light source and background light. Therefore, the performance measures can be formulated through the amount of differences between these two lights. For simplification, this approach is based on the values of the human factor suggested by International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). Performance measures for AtoN placement can be evaluated through AtoN Simulator, which has been being developed by KIOST/KRISO in Korea and has been launched by Korea National Research Program. Simulations for evaluation are carried out at waterway in Busan port in Korea.