• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.1-13
• /
• 2003

This International Standard establishes an AVI/AEI System based on radio frequency technologies. This system is intended for general application in ITS. Specially, It allows the transfer of the identification codes and further information about equipment and vehicles used in intermodal transport into such CVO and information systems related to Intermodal Transport processes. The aim of this standard is to define, describe and specify Architecture, System Parameters, Numbering/ Data structures and interface related to an AVI/AEI system to provide an enabling Standard, which, whilst allowing the system specifier to determine the performance levels and operating conditions, provides a framework for nominal interoperability. The Standard is to establish a common framework to achieve unambiguous identification in AVI/AEI applications. Thes is AVI/AEI is designed to be an 'enabling' structure to allow interoperability between different commercial systems, and not prescriptive in determining any one system. The ISO TC204 WG4 has eight active work items. A new WI on ERI is progressing quickly; three WIs for the road environment and four multimodal WIs are under development. All Work Items are joint between CEN TC278 and ISO TC204 according to the Vienna Agreement, with CEN in the lead. The work is progressing with some delay. For all the work items, the countries who have appointed experts we: Australia, Austria, Belgium, Canada, Czech, Denmark France, Germany, Japan, Korea, the Netherlands, Norway, Spain, Sweden, UK and USA. There are 30 registered experts. The study focus on the AVI/AEcl standardization and developing of the Korea standard

• The Korean Journal of Malacology
• /
• v.28 no.4
• /
• pp.305-312
• /
• 2012

Manila clam, Ruditapes philippinarum (SL; $32.74{\pm}2.18mm$, TW; $8.29{\pm}1.41g$, N; 450) were exposed to various concentrations of naphthalene for 20 weeks. Exposure concentrations of naphthalene established control, solvent control (ethanol), 30, 60, 90 and $120{\mu}g$ Nap $L^{-1}$ following results of 96h acute exposure. After exposure during 20 weeks, survival rate of the manila clam was lowed in 60, 90 and $120{\mu}g$ Nap $L^{-1}$ exposure group compared control group. Also, sex ratio of male was higher in $60{\mu}g$ Nap $L^{-1}$ exposure group (${\chi}^2=5.492$, P < 0.05) but lowed $90{\mu}g$ Nap $L^{-1}$ exposure group (${\chi}^2=4.214$, P < 0.05) and $120{\mu}g$ Nap $L^{-1}$ exposure group (${\chi}^2=30.118$, P < 0.05). Gonad development was delayed in female (> $60{\mu}g$ Nap $L^{-1}$) and male (> $30{\mu}g$ Nap $L^{-1}$). Intersex was 16.28% in female, 1.68% in male. In this result, naphthalene caused survival decrease, imbalance of sex ratio, delay of gonad development of the manila clam. Also, chronic exposure to naphthalene suggested abnormal effects in reproduction of the manila clam.

• Korean Journal of Veterinary Research
• /
• v.50 no.2
• /
• pp.93-103
• /
• 2010

This study investigated the potential effects of amitraz on the pre- and postnatal development, behavior, and reproductive performance of offspring of parent rats given amitraz during pre-mating, gestation, and lactation. The test chemical was administered via the drinking water containing 0, 40, 120, and 360 ppm to male rats from 2 weeks before mating to the end of 14-day mating period and to females from 2 weeks before mating, throughout mating, gestation and lactation up to weaning. Based on fluid consumption, the male rats received an average of $0,\;5.7{\pm}1.33,\;13.2{\pm}2.08,$ and $35.8{\pm}3.42$ mg/kg/day amitraz, and the female rats received an average of $0,8.7{\pm}4.42,\;20.1{\pm}9.60,\;and\;47.6{\pm}22.38$ mg/kg/day amitraz, respectively. At 360 ppm, an increase in the incidence of abnormal clinical signs, a suppression in the body weight gain, a decrease in the food consumption and litter size, an increase in the post-implantation loss, and a decrease in the seminal vesicle weight were observed in the parent animals. In addition, a suppression in the body weight gain, a decrease in the grip strength, a delay in the negative geotaxis, an increase in the pre- and post-implantation loss, and a decrease in the number of live embryos were observed in the offspring. At 120 ppm, suppressed body weight gain and reduced food consumption were observed in the parent rats. Suppressed body weight gain and decreased grip strength were also observed in the offspring. There were no signs of either reproductive or developmental toxicity at 40 ppm. Under these experimental conditions, the no-observed-adverse-effect level of amitraz for parent rats and their offspring was estimated to be 40 ppm in rats.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.151-160
• /
• 1997

In this paper, we have carried out the DS/CDMA with a suppressed pilot channel, which is used in receiving coherently with Rake diversity and in synchronizing the chip timing, in the mobile satellite communication. Also, we have investigated the envelope variation of a shadowed Rician fading simulator, and analyzed the error performences of DS/CDMA in the mobile satellite communication. The results showed that the error performance in the Heavy shadowing environment might be degraded more than in the Rayleigh fading environment since the fading envelopes in the former environment are varied randomly compared with those in the latter environment. And the performence of DS/CDMA system could be improved about 10 dB compared with that of narrowband QPSK system. In conclusion, DS/CDMA with a suppressed pilot channel had the best performance in the case of the suppressed pilot channel to transmission power ratio $\beta$=-8 dB, the number of complex delay profiles $N_{profile}$=32, and using these values, the error performance of DS/CDMA in Light shadowing environment was identical to the ideal QPSK error performance.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.102-102
• /
• 2018

Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.13-13
• /
• 2014

Species belonging to the genus Fusarium are widely distributed and cause diseases in many plants. Isolation of fungal strains from air or cereals is necessary for disease forecasting, disease diagnosis, and population genetics [1]. Previously we showed that Fusarium species are resistant to toxoflavin produced by the bacterial rice pathogen Burkholderia glumae while other fungal genera are sensitive to the toxin, resulting in the development of a selective medium for Fusarium species using toxoflavin [2]. In this study, we have tried to elucidate the resistant mechanism of F. graminearum against toxoflavin and interaction between the two pathogens in nature. To test whether B. glumae affects the development of F. graminearum, the wild-type F. graminearum strains were incubated with either the bacterial strain or supernatant of the bacterial culture. Both conditions increased the conidial production five times more than when the fungus was incubated alone. While co-incubation resulted in dramatic increase of conidial production, conidia germination delayed by either the bacterial strain or supernatant. These results suggest that certain factors produced by B. glumae induce conidial production and delay conidial germination in F. graminearum. To identify genes related to toxoflavin resistance in F. graminearum, we screened the transcriptional factor mutant library previously generated in F. graminearum [3] and identified one mutant that is sensitive to toxoflavin. We analyzed transcriptomes of the wild-type strain and the mutant strain under either absence or presence of toxoflavin through RNAseq. Expression level of total genes of 13,820 was measured by reads per kilobase per million mapped reads (RPKM). Under the criteria with more than two-fold changes, 1,440 genes were upregulated and 1,267 genes were down-regulated in wild-type strain than mutant strain in response to toxoflavin treatment. A comparison of gene expression profiling between the wild type and mutant through gene ontology analysis showed that genes related to metabolic process and oxidation-reduction process were highly enriched in the mutant strain. The data analyses will focus on elucidating the resistance mechanism of F. graminearum against toxoflavin and the interaction between the two pathogens in rice. Further evolutionary history will be traced through figuring out the gene function in populations and in other filamentous fungi.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.343-349
• /
• 2013

Crashworthy fuel cells have a great influence on improving the survivability of crews. Since 1960's, the US army has developed a detailed military specification, MIL-DTL-27422, defining the performance requirements for rotorcraft fuel cells. In the qualification tests required by MIL-DTL-27422, the crash impact test should be conducted to verify the crashworthiness of fuel cell. Success of the crash impact test means the improvement of survivability of crews by preventing post-crash fire. But, there is a big risk of failure due to huge external load in the crash impact test. Because the crash impact test itself takes a long-term preparation efforts together with costly fuel cell specimens, the failure of crash impact test can result in serious delay of a entire rotorcraft development. Thus, the numerical simulations of the crash impact test has been required at the early design stage to minimize the possibility of trial-and-error with full-scale fuel cells. Present study performs the numerical simulation using SPH(smoothed particle hydro-dynamic) method supported by a crash simulation software, LS-DYNA. Test condition of MIL-DTL-27422 is reflected on analysis and material data is acquired by specimen test of fuel cell material. As a result, the resulting equivalent stresses of fuel cell itself are calculated and vulnerable areas are also evaluated.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.37-43
• /
• 1999

Modules of the system that requires large capacity and high-speed information processing are implemented in the form of MCM that allows high-speed data processing, high density circuit integration and widely applied to such fields as ATM, GPS and PCS. Hence we developed the ATM switching module that is consisted of three chips and 2.48 Gbps data throughput, in the form of 10 multi-layer by Cu/Photo-BCB and 491pin PBGA which size is $48 \times 48 \textrm {mm}^2$. hnologies required for the development of the MCM includes extracting parameters for designing the substrate/package through the interconnect characterization to implement the high-speed characteristics, thermal management at the high-density MCM, and the generation of the testability that is one of the most difficult issues for developing the MCM. For the development of the ATM Switching MCM, we extracted signaling delay, via characteristics and crosstalk parameters through the interconnect characterization on the MCM-D. For the thermal management of 15.6 Watt under the high-density structure, we carried out the thermal analysis. formed 1.108 thermal vias through the substrate, and performed heat-proofing processing for the entire package so that it can keep the temperature less than $85^{\circ}C$. Lastly, in order to ensure the testability, we verified the substrate through fine pitch probing and applied the Boundary Scan Test (BST) for verifying the complex packaging/assembling processes, through which we developed an efficient and cost-effective product.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1124-1131
• /
• 2006

The recent medical treatment guidelines and the development of information technology make hospitals reduce the expense in surrounding environment and it requires improving the quality of medical treatment of the hospital. Moreover, MIS, PACS(Picture Archiving and Communication System), OCS, EMR are also developing. Medical Information System is evolved toward integration of medical IT and situation is changing with increasing high speed in the ICT convergence. Mobile component refers to construct wireless system of hospital which has constructed in existing environment. Through RFID development in existing system, anyone can log on easily to internet whenever and wherever. It is the core technology to implement automatic medical processing system. This paper provides a basic review of RFID model, PACS application component services. In addition, designed and implemented database server's component program and client program of mobile application that recognized RFID tag and patient data in the ubiquitous environments. This system implemented mobile PACS that performed patient data based db environments, and so reduced delay time of requisition, medical treatment, lab.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.379-387
• /
• 1991

The effects of organic acids (acetic, citric and lactic acids) treatment on microbial spoilage of chilled beef were studied during aerobic storage at $4^{\circ}C$ for 11 days. The organic acids had definite effects on the delay of the development of off-odor and slime of chilled beef. When chilled beef slices were treated with 1, 2, 3 and 4% of organic acids, off-odor was developed 1, 2, 3 and 5 days later than control, respectively, regardless of the kinds of organic acid. The slime was produced two days after the day of off-odor development in $1{\sim}3%$ organic acid-treated chilled beef, but no slime was produced on chilled beef treated with 4% organic acid. The off-odor was detected organoleptically when pH and number of microorganisms of chilled beef were, $5.6{\sim}5.8\;and\;0.8{\times}10^7{\sim}1.8{\times}10^7\;cell/cm^2$, respectively, and slime was observed when pH and number of microorganisms of chilled beef were $5.9{\sim}6.2\;and\;2.0{\times}10^7{\sim}6.0{\times}10^7\;cell/cm^2$, respectively, in control and treated groups.