• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.22-26
• /
• 2004

In the light of necessary analysis on the cooperation and development between ports and shipping line, and the characteristic of cooperation between international ports and shipping lines, the article analyses the operating strategies in actual shipping lines benefits to the cooperation between ports and shipping lines. After all-round analysis on the cooperation and development between ports and shipping lines, the author presents the running model of ports and shipping lines in Far East, which is the integration of operation between ports and shipping lines (namely integration of logistics service network). (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.370.2-370
• /
• 2002

Magnetostrictive materials are used low-frequency sonar transmitter instead of piezoelectric materials. But it is difficult to analyze due to the nonlinearity and hysteresis of magnetostrictive materials. This paper deals with the program development based on finite element method to model the magnetostrictive tonpilz transducers and to analyze their acoustic characteristics. (omitted)

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.462-464
• /
• 1990

We report the development of a surface discharge preionized KrF discharge Laser with a new type of high-brightness Corona preionizer using a segmented columnar $BaTiO_3$ dielectric. This Laser characteristic was higher value than that obtained with the conventional corona preionizer using a glass, $Al_2O_3ceramic$, Kapton film, or a Teflon insulator.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.768-776
• /
• 2007

A new type of the fluid circulation blood pressure simulator was proposed to enhance the blood pressure simulator used for the development and evaluation of automatic sphygmomanometers. Various pressure waveform of fluid flowing in the pipe was reproduced by operating the proportional control valve after applying a pressure on the fluid in pressurized oil tank. After that, appropriate fluid was supplied by operating the proportional control valve, which enabled to reproduce various pressure wave of the fluid flowing in the tube. To accomplish this work, the mathematical model was carefully reviewed in cooperating with the proposed simulator. After modeling the driving signal as input signal and the pressure in internal tube as output signal, the simulation on system parameters such as internal volume, cross-section of orifice and supply pressure, which are sensitive to dynamic characteristic of system, was accomplished. System parameters affecting the dynamic characteristic were analyzed in the frequency bandwidth and also reflected to the design of the plant. The performance evaluator of fluid dynamic characteristic using proportional control signal was fabricated on the basis of obtained simulation result. An experimental apparatus was set-up and measurements on the dynamic characteristic, nonlinearity, and rising and falling response was carried out to verify the characteristic of the fluid dynamic model. Controller was designed and thereafter, simulation was performed to control the output signal with respect to the reference input in the fluid dynamic model using the proposed proportional control valve. Hybrid controller combined with an proportional controller and feed-forward controller was fabricated after applying a disturbance observer to the control plant. Comparison of the simulations between the conventional proportional controller and the proposed hybrid simulator indicated that even though the former showed good control performance.

• Journal of the Korean Home Economics Association
• /
• v.51 no.2
• /
• pp.195-206
• /
• 2013

This study was conducted in order to investigate the variables that relate and affect the internalizing and externalizing problems of multicultural children. 159 multicultural children in the $3^{rd}{\sim}6^{th}$grade were selected from elementary schools in Gwangju and the Jeollanamdo area. The data was analyzed by using the frequency, Cronbach's ${\alpha}$, t-test, ANOVA, Pearson's correlation and hierarchical regression by SPSS 12.0 program. The results were as follows: first, the internalizing problems were different according to the socio-demographic variable: (gender, subjective economic level), multicultural characteristic variable: (mother's communication ability, likability of mother's nationality, etc.), parent-child relationship variable: (relationship with mother, relationship with father) and social support variable: (peer support, teacher support). Further, the externalizing problems were different according to the socio-demographic variable: (gender), multicultural characteristic variable: (mother's nationality, mother's communication ability, etc.), parent-child relationship variable: (relationship with mother, relationship with father) and social support variable: (peer support, teacher support). Second, the influential variables regarding the internalizing problems were children's stress from cultural adaptability and the likability of the mother's nationality of the multicultural characteristic variable group, peer support of the social support variable group and the subjective economic-level of the socio-demographic variable group. Moreover, the influential variable on the externalizing problems was children's stress from the cultural adaptability of the multicultural characteristic variable group. The most influential variable of such variables was children's stress from cultural adaptability of the multicultural characteristic variable group. The results of this study will provide information for the development of educational and therapeutic intervention program for multicultural children.

• Journal of Environmental Science International
• /
• v.11 no.2
• /
• pp.121-130
• /
• 2002

Compare to investigate the taxonomic utility of infragenera system and interspecific of Asian Geranium, we examined the fruit and seed morphology from 35 taxa. The fruit shape and seed's dispersal way did so that may divide subgenus or some part section to do could reason evolutionary trends. That is, at seed dispersal, the awns of section Geranium of subgenus Geranium, ramains attached at the top of rostrum, though fairy easily broken off, because seed increases awn's elasticity by diffusive way, it is long characteristic seed\`s dispersal distance, and subgenus Robertium observed that seed dispersal distance is short because it is no awn's elasticity by way that seed dispersal is gone as awn drops with rostrum. Also, section Geranium of subgenus Geranium and subgenus Robertium act role that awn keeps temporarily breed swerving with mericarp instead of bristle because section Tuberosa of subgenus Geranium is not bristled function that keep temporarily breed because mericarp bristled on base at seed dispersal do while. Therefore, is thought that is talon that when consider formation's development and function regarding this seed dispersal function, subgenus Geraniuum evolves more than subgenus Robertium. Seed morphology can divide by 2 subgenera(Geranium, Robertium) according to pattern of seed coat. and Seed's morphology characteristic(whole shape, color, form of seed apical and base, micropyle area, hilum area, chalaza, and position of seed hilum area), can distinguish some species, but is thought that is not reasonable as for discernment characteristic form and nature by repetition of characteristic form and nature. Especially, infrasection do in fruit and seed's morphology that is handling in this research that know to argue classification system and relationship by repetition of characteristic form and nature difficult. To all reliable truth, cytological, ecological, embryology, and molecular genetics research about talon is considered that should be achieved section Geranium that do not handle yet.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.359-364
• /
• 2013

Purpose: This study was to observe characteristic of metal oxidation and bonding strength according to composition of Ni-Cr alloy for porcelain fused to metal crown. The three kinds of Ni-Cr alloy with different composition ratio of parent metal were observed general properties and chemical properties of each alloy surface and measured the shear bonding strength between ceramic and each alloys. The aim of study was to suggest the material for design of parent metal's composition ratio to development of alloy for porcelain fused to metal crown. Methods: The three kinds of alloy as test specimen was Ni(59wt%)-Cr(24wt%), Ni(67wt.%)-Cr(16wt.%) alloy and Ni(71wt%)-Cr(12wt%)alloy. The oxide on surface was observed by EDX. And the shear test was performed by MTS. Results: The surface property and oxide characteristic analysis of oxide layer, weight percentage of Element O within $Ni_{59}Cr_{24}$ alloy measured 23.03wt%, $Ni_{67}Cr_{16}$ alloy measured 21.13wt% and $Ni_{71}Cr_{12}$ alloy was measured 48.55wt%. And the maximum shear bonding strength was measured 58.02Mpa between $Ni_{59}Cr_{24}$ alloy and vintage halo(H2 group). Conclusion: The surface property and oxide characteristic three kind of Ni-Cr alloy was similar. and shear bonding strength showed the highest bonding strength in H2 specimens.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.143-152
• /
• 2004

It has not been elucidated whether the initiation of condylar development of the mandible is related with the periosteum of the mandible, or if it derives from a separate programmed blastema not related with the mandible. Also, although the mandibular condylar cartilage is known to promote growth, few studies have dealt with molecular-biologic mechanisms such as the expression of specific genes according to the differentiation of the mandibular condyle. To elucidate the unique cellular characteristics, development, and differentiation process of the mandibular condyle, an examination of expressions of genes characteristic of cartilage and bone were carried out using RT-PCR and mRNA in situ hybridization. 1. Type? collagen mRNA was detected with type II collagen mRNA in the differentiation and growth process of the cartilage of the mandibular condyle. TypeII collagen mRNA was demonstrated in the whole resting md upper part of the poliferative zone, whereas type II collagen mRNA was observed in the resting, proliferative and upper hypertrophic cartilage zone of the mandibular condyle. 2. The condylar cartilage rapidly increased in size due to the accumulation of hypertrophic chondrocytes as characterized by the expression of type II collagen mRNA during postnatal development. 3. BMP-4 mRNA was present in the anlage of the future condylar process and also in the ossifying mandibular body. 4. IHH mRNA was limited exclusively to the lower part of the proliferative zone and the upper part of the hypertrophic cartilage zone during condylar development. These findings were different from those in the growth-plate cartilage of the long bone, indicating a characteristic feature of the differentiation of the chondrocytes in the condylar cartilage present in prenatal and postnatal development. Furthermore, it was also suggested that chondroblasts of condylar cartilage rapidly differentiate into hypertrophic chondrocytes with increased functional Load force such as muscle activity and mastication.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.139-140
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1009-1010
• /
• 2010