• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.341-344
• /
• 2000

본 논문에서는 stepper motor 나 BLDC motor를 구동하기 위하여, 최신 microcontroller, PC, control IC board 등으로 구성된 새로운 시스템을 설명하는데 목적이 있다. 이 시스템에서는 인터넷으로 전송되는 microcontroller program를 이용하여 SPDS(smart power development system)을 구동시키고, 이로 인하여 dedicated drive IC를 제어하여 stepper 또는 BLDC motor를 구동시키게 되며, 원격지에 있는 사용자의 motor를 제어함을 목표로 하고 있다. 본 논문에서 사용된 drive IC 는 SGS-Thomson 제품으로써 stepper motor 용으로 L6205/6/7/8, 그리고 BLDC motor 용으로 L6235 이다. SPDS는 ST92F120 16-bit microcontroller를 사용하고 있다. 이 논문에서는 인터넷 Protocol Converter에 의한 프로그램 전송, Operating System Program 및 Driver Software Program의 생성 및 구성, Drive IC의 구성 및 특징, SPDS 의 hardware 및 software 의 구성 등에 대하여 설명한다.

• 대한지역사회영양학회지
• /
• 제5권2호
• /
• pp.217-224
• /
• 2000

The purpose of this study is to develop a computer-assisted nutrition counseling program for dietitians in elementary school foodservice. The program consists of four menus. The first menu is to assess the general status of the body, such as ideal body weight, obesity index, and physical development based on age, sex, height, and weight. The second menu is a dietary analysis program with respect to the Korean recommended dietary allowance. The third menu can be used for nutrition counseling to give suggestions about food habits and physical activities. The fourth menu is the data printing function to give consultations for clients which can be used for monitoring. This program can help dietitiants to provide nutrition counseling in the practice of elementary school food service.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.10-13
• /
• 1996

We have developed the digital polysomnograph system to enhance the manual sleep study. This system is composed of host PC and target board. The host computer is IBM-PC Pentium 133 MHz and the target board is PC31 (processor type: TMS320C31). These two Processors communicate with each other by dualport RAM. Target board acquire 16 channel sleep signals from the Polysomnographic system (GRASS model 78, USA) and digitize them. We used high resolution monitor$(1600{\times}1280)$ to simulate the paper-recording quality of polysomnographic signal. We also implemented the GUI based polysomnographic staging program on the windows environment. Clinicians can score the sleep stage, and edit and mark the event efficiently. Finally it can support making patient database.

• 한국항공운항학회지
• /
• 제20권3호
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.14-18
• /
• 2005

The ultrasonic handy scanner to be developed in this research is a nondestructive inspection equipment with various facility. The ultrasonic inspection is the technique area which apply range is increasing greatly with IT. The purpose of this research is development of a ultrasonic handy scan inspection device with the utility in a work spot. The ultrasonic handy scanner to be developed with portability in this research is able to carry out the spot inspection. It can contribute to the quality improvement, cost reduction and safety design.

• 조명전기설비학회논문지
• /
• 제12권4호
• /
• pp.1-5
• /
• 1998

본 연구는 전자식 스타터를 사용하는 경우 형광햄프 수명말기에 발생되는 이상상태에서 회로를 보호할 수 있 는 보호회로에 대한 것이다. 본 논문에서는 이를 위하여 OP AMP와 SSR을 사용한 보호회로를 제시하였다. 제안된 회로를 PSpice를 사용하여 시뮬레이션올 수행하였으며, 이를 실험결과와 비교하여 그 타당성올 입증하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 1부
• /
• pp.366-369
• /
• 2010

본 논문에서는 가상현실 고소공포증 치료를 위한 원격진료 시스템을 제안하였다. 제작된 가상현실 시뮬레이터를 원격진료시스템에 연결시켜 원격지에서 PC를 통하여 작동시킴으로써 고소공포증 치료를 시도할 수 있도록 하였으며, 전문의가 환자 상태를 체크할 수 있도록 생체 신호를 전문의에게 전송하고 질문지를 온라인상으로 답변할 수 있는 시스템을 적용하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.207-210
• /
• 2004

In oil-filled equipment such as transformers, partial discharge or local overheating will make insulating material(oil, kraft paper, proclain and wood) be stressed and generate many sort of gases($CO,\;CO_2,\;H_2,\;C_2H_4$) which are dissolved in transformer oil. The ratio of this gas can make diagnostic tecchniques of the lifetime of transfomer so, it is important to monitoring $H_2$ gas continuously. This paper developes a system of detecting about $H_2$ gas by using $H_2$ gas sensor, and we describe operation and performance of this system

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.43-45
• /
• 1998

ADD has developed a special BLDCM(brushless d.c. motor) that has small size and high power density. The model of BLDCM is like that of advanced nation. Design, production and test carried out with ADD and HICO. Now the performance of BLDCM is achieved 65% of design data. Also we are concerned with adhesion of magnet in rotor for high speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.87-91
• /
• 2013

Rubber Components have been playing important role for the isolation of noise and vibration of vehicle. This paper is presented the new method of dynamic modeling of rubber component for simulating the dynamic characteristics of it under the varing loading condition. Rubber dynamic model consists of the hyperelastic, viscoelastic and elasto-plastic characteristics of rubber. Dynamic proporties of rubber are calculated at each preload and frequency conditions, compared to test data, and evaluated the validity of rubber dynamic model. This technique is expected to understand and improve the characteristics of noise and vibration with relation to rubber components.