• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.284-290
• /
• 2003

It is very important to minimize the weight of shaft from the viewpoint of economics and manufacture. For minimizing effectively the diameter of shaft in torsional shafting, authors developed computer program using the real-coded genetic algorithm which is one of optimizing techniques and based on real coding representation of genetic algorithm. In order to confirm the accuracy and effectiveness of the developed computer program, the computational results by the developed program were compared with those of conventional strength, stiffness and vibration designs for a generator shafting.

• Journal of Power System Engineering
• /
• v.4 no.1
• /
• pp.51-59
• /
• 2000

Active suspension systems have been using for improving ride quality and stability for vehicles. An active suspension system is composed of a hydraulic pump, pressure control valves, hydraulic dampers, vehicle body, tires and other components. In this study, the mathematical model for the active suspension system based on the quarter car concept is derived, and a program for analysing the dynamic behaviour of the suspension system is developed. The computed results by the developed program are compared with the experimental results for confirming the reliability and usefulness of the developed program.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.207-214
• /
• 2001

In Korea, the multi-dwelling residential buildings are most popular housing system that is reinforced concrete shear wall system. However, the serviceability and safety of the system have been decreased because of the errors in design or construction and inadequate maintenance. In addition the safety of the system cannot be evaluated reasonably because the system is analyzed by the deterministic approach. Therefore, this study is aimed to analyze reinforced concrete shear walls by the reliability approach considering uncertainty based on the probability theory. In this study, a reliability analysis program using MATLAB is developed by combining AFOSM and Sampling Method for the reinforced concrete shear walls within feasible design area. The reasonable reliability index β of ultimate limit states for RC shear walls are calculated automatically using this developed program with the measured data those have means and standard deviations in the field. The ultimate states are compression failure, tension failure, governing compression, and governing bending of the reinforced concrete shear walls respectively. To estimate the safety of the system using developed program can be used to predict residual life-time of the system.

• Journal of Digital Convergence
• /
• v.5 no.2
• /
• pp.109-122
• /
• 2007

The original element for development in current society is recognized as knowledge, technology and information. It has been developed and improved the human resources development system through the occupational standards that closely connected system among work, education training and qualification in every country. This study is for development of the occupation standards that was standardized the required competency element, performance criteria, range statement, assessment guideline in machinery industry, also developing the education training program based on competency to be able to apply department of relevant machinery industry in vocational high school. Occupational standards and key competencies were developed by expert in field engineer and verified about contents and level system by questionnaire and interviewing. Education training program was developed on SCID model, and the effectiveness and suitability of the training program was verified by teacher, professor and student belonging to training organization.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.815-823
• /
• 1999

A dynamic simulation program may be used for the development of effective control algorithms for the ice storage cooling system. Simplified effective dynamic models for an ice-on-coil type storage tank, a screw chiller, a water-to-air heat exchanger, three way valves, pipes, pumps, temperature sensors, and controllers were developed. And a dynamic simulation program for the ice storage cooling system was developed by using these dynamic models. Control algorithms for the full storage system were also selected and analyzed in order to show the effectiveness of these models. From the simulation results, it may be concluded that the simulation program developed in this study can be effectively used for the development of improved control algorithms for the ice storage cooling system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.9-16
• /
• 1998

New program for springback analysis has been developed to predict the deformation of springback more accurately. Static implicit FEM is used to find out the static equilibrium after springback. The shell element with 6 dogrees of freedom and 4 nodes is carefully implemented to improve the accuracy and the compatibility between forming analysis and springback analysis. Co-rotational approach and Newton-Raphson nonlinear iteration are used to resolve the nonlinearity of large deformation. The benchmark results show that the developed program gives good predictions in comparison with experimental and other commercial S/W's results. As practical examples, U draw bending and S-rail problems are carried out by the developed program.

• Transactions of Materials Processing
• /
• v.6 no.2
• /
• pp.118-135
• /
• 1997

In order to analyze the deformation and residual curvature of steel sheets in the strip processing lines, a program for calculating curvature and work hardening of sheet was developed. Strip deformation caused by repeated bending under tension in the process lines was analyzed on the basis of the incremental-plasticity theory with the mixed hardenting model for the purpose of predicting the strip shape and the yield stress change. The developed calculation program was applied to predict curl and gutter of sheets within a 10% difference. The yield stress increment was also predicted with the similar accuracy. Application of the model to tension legvelling process showed that gutter could be controlled by intermesh and elongation. The yield stress increment in the electro-galvanizing line calculated by the developed program was found to be dependent on the yield strength, the applied tension and the diameter of the smallest roll.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2023

This paper describes a newly-developed analysis methodology in comprehensive vibration assessment program (CVAP) of reactor internals to develop a valid-prototype for the design of nuclear power plants. The new analysis methodology developed in this study will be confirmed through a scale model testing (SMT). Based on the measurements obtained from dynamic pressure transducers in the SMT, a new non-dimensional equation is developed to apply the forcing functions at reactor internals for the prototype. In addition to the new non-dimensional equation, a computational fluid dynamics(CFD) is used to develop the application of the hydraulic loads at reactor internals for the prototype.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.35-42
• /
• 2016

There are many reclamation projects domestically and internationally which requires large quantity of reclaimable materials. To provide enough reclaimable soils which are limited in land, there have been various research focusing on the dredged soils in the marine environments. As a part of this research, a GIS based 3D dredging reclamation visualization program was developed for the volume estimation of dredged soils in 2015. The developed program is based on the digitized spatial information of the site investigation data with a consideration of the reliability of the data. Prior to the validation with the comparisons with the actual dredged volume measurement data, the developed program was compared with the commercial 3D visualization program with 3D visualized results from the test site near the Gunjang harbor. The validation of the developed program was performed in terms of the degree of visualized precision, the sectional and profiling of soil layers and the dredged volume estimation results. Based on the comparisons, both commercial and developed program show similar dredged volume with minor discrepancies in soil layers.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.423-429
• /
• 2015

Objective : The purpose of this study was to investigate the effects of a body alignment correction program on asymmetrically developed squash players. Method : 30 experienced squash players who showed asymmetric body development, after evaluation of moire topography contour line shape, were involved in the experiment. All of them were right-handed and had more than five years of experience playing squash. Variables of body composition, moire topography and EMG were statistically compared between pre- and post- application of the 12-week body alignment correction program. The program consisted of 10-minute, left-handed forehand and backhand drive movements and 36 minutes performing 12 different yoga postures. Results : First, the body alignment correction program showed significant effects on the total weight, body fat percentage, and body mass index of the participants. Second, a decrease of right side inclined angles and an increase of left side inclined angles might result in a higher left-right symmetry rate and a better left-right balance; however the data was not statistically significant. Third, the EMG left-right deviation of erector spinae and latissimus decreased and the erector spinae muscle was thought to be more essential for vertebral movement and left-right asymmetry correction. Conclusion : A body alignment correction program, including yoga and opposite side exercises, could reduce left-right asymmetry.