• Structural Engineering and Mechanics
• /
• 제3권4호
• /
• pp.341-358
• /
• 1995

The results of a series of ten W-shaped test specimens subjected to monotonic, quasi-static cyclic loading and fatigue type of loading in the form of constant amplitude tests are presented. The objectives were to assess and compare the rotation capacity and energy absorption of monotonically and cyclically loaded beams, and for the latter specimens to document the deterioration in the form of low cycle fatigue due to local buckling. In addition, strength and energy dissipation deterioration and damage models have been developed for the steel beam section under consideration. Finally, a generalized model which uses plate slenderness values and lateral slenderness is proposed for predicting rate in strength deterioration per reversal and cumulated damage after a given number of reversals.

• 한국수자원학회논문집
• /
• 제54권8호
• /
• pp.589-597
• /
• 2021

본 논문에서는 부식깊이의 실측 데이터를 통해 부식깊이 예측식을 수립하고 상수관망의 노후도 및 안전도 등을 결정할 수 있는 운영인자를 수립하여 실제 관망에 적용하였다. 신뢰성해석과 운영인자 분석을 통해 노후도를 비교·분석 하였다. 신뢰성해석결과 가덕의 직경 200 mm 관의 경우 시간이 경과함에 따라 4.36%, 6.18%, 8.23%로 증가하는 것으로 나타났고 남이의 직경 200 mm 관의 경우 시간이 경과함에 따라 7.35%, 9.51%, 12.99%로 증가하는 것으로 나타났다. 운영인자를 결정하여 방사형 차트 면적을 통해 노후도를 비교한 결과 가덕은 1.009, 남이는 1.174로 남이 지역이 노후도가 큰 것으로 나타났다. 신뢰성해석과 운영인자를 통해 교체 우선순위를 결정할 수 있었다.

• 농업생명과학연구
• /
• 제46권1호
• /
• pp.17-27
• /
• 2012

본 연구는 산악형 국립공원으로 분류된 6개 국립공원 53개 노선 204.5 km 구간을 대상으로 탐방로의 물리적 특성 및 훼손유형, 훼손정도 등을 파악하여 공원관리를 위한 기초자료로 활용하기 위해 수행되었다. 탐방로의 물리적 특성을 조사한 결과, 노면의 평균경사는 $14.6^{\circ}$, 평균 노폭은 1.5 m, 평균 나지폭은 1.1 m로 조사되었고, 훼손유형은 6개의 유형이 2,686회 나타났으며, 노면침식 현상이 전체 훼손유형의 37%로 가장 많은 발생을 보였다. 다음으로 뿌리노출 현상, 노폭확대 현상, 분기 현상, 암석노출 현상, 비탈붕괴 현상 순으로 조사되었고, 훼손정도를 조사한 결과, "건전" 구간이 165.34 km로 80.9%를 차지하고 있었고, "강" 구간이 9.08 km, "중" 구간이 12.69 km, "약" 구간이 17.39 km로 훼손구간은 39.16 km에 훼손율은 19.1%로 조사되었다.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.151-159
• /
• 2018

Maintenance activities are regarded as a key part of the repairable deteriorating system because they maintain the equipment in good condition. In practice, many maintenance policies are used in engineering fields to reduce unexpected failures and slow down the deterioration of the system. However, in traditional maintenance policies, maintenance activities have often been assumed to be performed at the same time interval, which may result in higher operational costs and more system failures. Thus, this study presents two non-periodic preventive maintenance (PM) policies for repairable deteriorating systems, employing the failure rate of the system as a conditional variable. In the proposed PM models, the failure rate of the system was restored via the failure rate reduction factors after imperfect PM activities. Operational costs were also considered, which increased along with the operating time of the system and the frequency of PM activities to reflect the deterioration process of the system. A numerical example was provided to illustrate the proposed PM policy. The results showed that PM activities performed at a low failure rate threshold slowed down the degradation of the system and thus extended the system lifetime. Moreover, when the operational cost was considered in the proposed maintenance scheme, the system replacement was more cost-effective than frequent PM activities in the severely degraded system.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.51-64
• /
• 1998

Mean shifts may be found in tool wear in machining, drawing, stamping and moulding operations, which make the process quality level deteriorate over time. In such situations, it is necessary to reset or readjust the manufacturing process at regular time basis or by inspection to prevent defective items produced. Although the deterioration rate may be assumed to be linear in a production cycle, there are many cases where the rate varies after resetting due to the variation of tool characteristics or by using the resharpened tools. In such cases, the deterioration rate should not be assumed to be a deterministic constant but a random variable. This paper is to find an optimal resetting period and quality level for such production processes.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.13-18
• /
• 2011

Building is different from the general commodities and needs to maintain the function and performance to get the living condition. Building deterioration occurs naturally with time elapse. Deterioration reasons are various. These are physical, functional, social and second physical aspect. Building would inevitably be deteriorated and need to repair various building part and materials. It gets to arrive at repair or rebuilding time until any management activity is meaningless. It is important to decide the rebuilding time in a management cost. In this paper, it aimed at analyzing the management annual cost and provide a rebuilding time of a apartment housing with a deterioration curve model. Results of this study are as follows : Most of the building has started to deteriorate in 40 years when the performance of building downgrades to 20%. After it past about 40 years, the deterioration rate is faster than the earlier 40 years. Fourth, the rebuilding time of an apartment housing is recommended about 45 years if the building service life has 60 years.

• 상하수도학회지
• /
• 제24권2호
• /
• pp.183-193
• /
• 2010

Well planned rehabilitation order of pipes is essential for efficient maintenance and management of Water Distribution Systems. In this study, not only deterioration rate of pipes but also structural and nonstructural failure which causes abnormal condition of WDS is considered to determine rehabilitation order. Probabilistic Neural Network is used for calculating deterioration rate at present and the importance of pipes is computed under structural and nonstructural failure by using Pipe by Pipe Failure Analysis and Effect Index. Utopian Approach, one of the Multi-Criteria Decision Making methods, is used for assessment of final rehabilitation order based on distance measure between utopian point and alternative one. Developed model in this study shows that it gives more reliable results than existing methods considering hydraulic relative importance does in application to real networks. In this point, the newly developed model, which gives advantages over existing models, can make a credible decision and simple application.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.168-176
• /
• 2014

This paper presents an engine oil change warning algorithm based on the test results of a small dip-stick-gage-type engine-oil-deterioration-detection sensor, software to realize the algorithm and a display device to apply the software. The algorithm determines the engine oil deterioration condition from the rate of change in the dielectric constant based on the average measured capacitance at $80^{\circ}C$ after the engine stops. The rate of change in the dielectric constant at the time for oil change correlates with the time that one of recommended warning limits for engine oil physical properties such as TAN (Total Acid Number), TBN (Total Base Number) and viscosity is first reached. At this point, a warning signal for oil change appears on the display device like a smart-phone or individual display device. The frames of smartphone app have three stages. The user can directly input all of the thresholds into the frame of the smartphone app. The screen of the display device comprises one frame for each warning signature with the related message. The user can input the thresholds to the device through a USB cable connected to a personal computer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.655-660
• /
• 2002

Major deterioration in concrete structures are salt attack and carbonation. Especially severe problems due to carbonation occur in tile concrete structures of city, tunnel, underground structures. Cracks in concrete during service life including early age due to hydration heat and/or shrinkage accelerate the diffusion of concrete so that the deterioration is also accelerated. In this study, carbonation depths of both non-cracked concrete and cracked concrete are evaluated and weight change test and TGA are carried out. Through the tests, a relation between water-cement ratio and carbonation depth is derived and also carbonation increase rate is derived in the function of crack width.

• 전기의세계
• /
• 제20권2호
• /
• pp.27-31
• /
• 1971

Using insulating paper (cellophan), we measured the influences of moisture abosrbed for electrical properties i.e. V.I curves which result in deteriorating due to the moisture alsorbed is related to electrical properties Considerally due to the electrolytic effects of moisture involved cellulose Gel structure, we obtained also an evaluation method of deterioration rate Caused by the moisture absorbed in insulating papers.