• Wind and Structures
• /
• v.31 no.3
• /
• pp.229-240
• /
• 2020

In the present work, the main features of primary vortices and the vorticity concentrations downstream of vortex bursting in crossflow plane of a delta wing with a sweep angle of Λ=70° were investigated under the variation of the sideslip angles, β. For the pre-review of flow structures, dye visualization was conducted. In connection with a qualitative observation, a quantitative flow analysis was performed by employing Particle Image Velocimetry (PIV). The sideslip angles, β were varied with four different angles, such as 0°, 4°, 12°, and 20° while angles of attack, α were altered between 25° and 35°. This study mainly focused on the instantaneous flow features sequentially located at different crossflow planes such as x/C=0.6, 0.8 and 1.0. As a summary, time-averaged and instantaneous non-uniformity of turbulent flow structures are altered considerably resulting in non-homogeneous delta wing surface loading as a function of the sideslip angle. The vortex bursting location on the windward side of the delta wing advances towards the leading-edge point of the delta wing. The trajectory of the primary vortex on the leeward side slides towards sideways along the span of the delta wing. Besides, the uniformity of the lift coefficient, C_L over the delta wing plane was severely affected due to unbalanced distribution of buffet loading over the same plane caused by the variation of the sideslip angle, β. Consequently, dissimilarities of the leading-edge vortices result in deterioration of the mean value of the lift coefficient, C_L.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.210-222
• /
• 2017

Railway turnout systems play a key role in railway systems that change train directions. The turnout systems are one of the weakest systems in railway systems, and consecutive maintenance is required. A turnout diagnostic system can automatically measure the turnout status and its deterioration. To diagnose the turnout systems, we follow conventional maintenance procedures and need to identify their physical characteristics to coincide the procedures and the characteristics. According to the physical characteristics, we should choose and install adequate sensors on the turnout systems to measure their physical characteristics. We studied the phenomenon of the turnout system responses for point moving and train running on the turnout systems. We installed sensors on the turnout system in a revenue line to measure the identified physical quantities and to reveal the robustness of the sensors under the turnout system environment.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.25-32
• /
• 2004

All the works including sculpture created by modern artists contain a message that represents both the ideas and spirit of an era. We are entrusted with the responsibility of transmitting to future generations modern art in as nearly as perfect condition as possible. Thus despite the challenges we face in preserving modern art, we are obliged to conserve it. Especially, outdoor sculpture can be considered as not only works of art themselves, but also a public art. The work of contemporary sculptors often refers to the complexity of social relationships between the art and the public space, so that the public space tends to include the actual public in the art. The conservator at this point needs to preserve tile concept of the public art which is incorporated in the public participation in the sculpture, in addition to the materials of the sculpture itself. Once the sculpture is damaged, it will need restoration. Restoration may be essential to prevent further deterioration, or it may be necessary in order to make an object usable again. It is difficult to generalize about restoration because, as with preventive treatment, the acceptable degree of intervention varies from one discipline to another The degree of treatment including restoration may depend on such variables as available resources, the future use of the object, and the needs of the particular discipline to which it belongs. When conservators start to treat artworks or during the treatment, they will face many moments where they have to make a choice. Codes of ethics are necessary in order to provide a basis for making choices. Even though ethics have always been subject to change depending on an era or culture, the ethics subject will be much easier to reached an agreement on than one involving aesthetic value. The aesthetic value will be one of the most prominent factors for defining the damage: even minor loss of parts or discolouration can be considered as fatal damage for artworks. Sometimes, an alteration of the appearancecould be intended by the artist himself so that the artist's intention could be important factor for judging the damage of artworks. But, modern hermeneutic theories show that the artist's intention cannot be the only factor for consideration, so that the interpretation and application of artist's intent should be an interdisciplinary task regarding distinctive social and cultural backgrounds.

• Journal of Distribution Science
• /
• v.6 no.1
• /
• pp.25-46
• /
• 2008

The latest flow in Korea's distribution market is characterized by the deterioration of small/medium distribution market due to the rapid growth of multinational discount stores. As various multinational discount stores have merged with Korean discount stores (Homever acquired Carrefour and E-Mart acquired Wal-Mart), these discount stores have enlarged in size and dominated the market. On the contrary, small/medium distributors with relatively weak infrastructures are losing competitiveness in the market. Traditional marketplaces in local areas, in particular, are facing a serious crisis as they are neglected in the depressed local markets and have been beaten by the increasing discount stores and the diversifying distributors. The purpose of this study was to propose alternative plans to revitalize traditional marketplaces that are endangered by the unbalanced development of the distribution industry. This study analyzed the distribution performances and problems of Daejeon Metropolitan City and used the analysis to point out the problems specific to traditional marketplaces and propose a way to revitalize them. I hope that this study can help discount stores and small/medium distributors find balance in the market, and give traditional marketplaces the competitiveness to pursue sustainable growth.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.72-84
• /
• 2016

The conventional brace system is generally accepted as the lateral load resisting system for steel structures due to efficient story drift control and economic feasibility. But lateral stiffness of the structure decreases when buckling happens to the brace in compression, so that it results in unstable structure with unstable hysteresis behavior through strength deterioration. Buckling restrained brace(BRB) system, in which steel core is confined by mortar/concrete-filled tube, represents stable behavior in the post-yield range because the core's buckling is restrained. So, seismic performance of BRB is much better than that of conventional brace system in point of energy absorption capacity, and it is applied the most in high seismicity regions as damper element. BRBs with various shaped-sections have been developed across the globe, but the shapes experimented in Korea are now quite limited. In this study, we considered built-up type of restraining member made up of precast reinforcement concrete and the steel core. we experimented the BRB according to AISC(2005) and evaluated seismic performances and hysteresis characteristics.

• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.2
• /
• pp.9-17
• /
• 2020

The ratio of the deterioration housing in rural area was 29.6%, but it was 18.3% in urban area based on a 2018 survey. In consideration of the point, this study aims to analyze the actual condition of indoor air quality in rural houses to provide basic data for improving the indoor air environment. It was investigated 15housings of Hongseong-gun, Chungchengnam-do. To investigate the correlation between indoor air quality and housing type, both the field survey of housing type and precision diagnosis of concentration of indoor air pollutants such as HCHO, TVOC, Fine dust(PM-10, PM-2.5), CO₂, Radon. The results of this study are as follows. First, according to the average value of each element of rural old housing, the construction year was distributed in 1939~2004, and 12households(80%) living in houses older than 30years have passed for about 46years. As for the housing area, more than 12houses(80%) of 60㎡ or more and 3 houses (20%) of less than 60㎡ were often living in relatively small-scale housing. Second, as a result of measuring indoor air pollutants in rural houses, substances exceeding the standard values were found in HCHO, TVOC, CO₂. Third, in the case of Fine dust and Radon, none of such factors were exceeded the standard. Fourth, there was no significant difference in indoor air quality depending on housing type in rural houses. This paper is expected to contribute to the regional development projects and effective implementation of rural policies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.71-74
• /
• 2007

With the changes of times the building materials tend to extend the demand for application under the special environment. Since high-ductile mortar is developed, the building materials show excellent performance like toughness, compression, tensile, and bending, etc. in the general concrete from the existing brittle point. And, recently they are widely used as repairing and reinforcing materials both at home and abroad because they are recognized as excellence like durability and fire-resistance. However, it is in a situation of creating problems in durability because it frequently happened deterioration of buildings that have already repaired and reinforced at a time when it requires reconstruction of recently deteriorated construction structure recently. Therefore, in this study improved with a more repair Material development and reinforcement of the second high-ductile mortar products for a variety of basic materials were presented want, research plans used include traditional repair materials and the newly developed PCM (polymer cement mortar) structural reinforcement type indicated that comparison. PCM analysis in order to present a rate depending on the types fiber 0, 1.2 and 2.0(%) at three levels and mixture water according to ratios of weight to Plain in the 2.0 and 1.85(kg) at two levels is set, the results were as follows. 1) This study has shown that PCM had excellent strain hardening behavior at the same time that the bending stress increased according to the fiber contents. 2) This study has shown that it had the durability performance due to the high substance transmission according to the fiber contents.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.1
• /
• pp.21-34
• /
• 2008

An improved optimum design method for reinforced concrete frames using integrated genetic algorithm(GA) with direct search method is presented. First, various sets of initially assumed sections are generated using GA, and then, for each resultant design member force condition optimum solutions are selected by regression analysis and direct search within pre-determined design section database. In advance, global optimum solutions are selected from accumulated results through several generations. Proposed algorithm makes up for the weak point in standard genetic algorithm(GA), that is, low efficiency in convergence causing the deterioration of quality of final solutions and shows fast convergence together with improved results. Moreover, for the purpose of elevating economic efficiency, optimum design based on the nonlinear structural analysis is performed and therefore makes all members resist against given loading condition with the nearest resisting capacity. The investigation for the effectiveness of the introduced design procedure is conducted through correlation study for example structures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.30-36
• /
• 2018

Researches on strengthening and rehabilitation are important since structural capacity is degraded by deterioration or damage of structural members. An effective strengthening scheme such as an externally bonded Carbon Fiber Reinforced Polymers (CFRP) can improve the structural performance of a concrete structure in a cost-effective way. Therefore, many experimental studies on strengthening methods have been widely carried out. In regards to the shear strengthening of a concrete beam, variables of the experimental studies were the amount of CFRP, the angle of the strip, the width of the strip, and the interaction between the materials. However, there are insufficient researches on bi-directional CFRP layout compared to the previous researches. In this study, a total of ten concrete beams were designed and tested to evaluate the shear strengthening effect using CFRP strips. The effectiveness of strengthening was investigated based on the shear contribution of materials, strain distribution of stirrup, and the maximum shear capacity of specimens.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.485-489
• /
• 2007

Purpose: The basic vascular anatomy and versatility of the anterolateral thigh flap was reported firstly by Song in 1984 and then by Zhang who introduced the reverse flow pattern of this flap. In this case, the authors reviewed various articles and their experiences with the distally based anterolateral thigh flap and applied it for coverage of bone-exposed wound occurred at the distal of the disarticulated knee stump. We consequently reported the reliability and resourcefulness of this flap in the difficult and limited situation. Methods: A 67-year-old-man who had suffered from arteriosclerotic obliterans inevitably underwent the disarticulation at knee joint due to clinical deterioration. He presented to our clinic with soft tissue necrosis and bone exposure at the stump. We debrided the wound and conducted the distally based anterolateral thigh island flap by transecting proximal portion of descending branch of the lateral circumflex femoral artery and the $14{\times}10cm$ sized flap was transferred to cover the defect. The pedicle measured 14 cm in length with pivot point 7 cm above the patella. Results: The postoperative course was mainly uneventful except early venous congestion for 4 days and subsequent partial skin loss. The wound was healed by secondary intension and no other sequelae had been observed during follow-up period of 12 months. Conclusion: Despite the presence of various reconstructive choices, the distally based anterolateral thigh island flap can be designed to repair soft tissue defects around the knee region, providing its reliable blood supply and long pedicle length, especially in the challenging cases.