• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.15-21
• /
• 2010

Structural analysis used to evaluate the load carrying capacity of a bridge should implement behavioral characteristics similar to the actual behaviors of the structure through loading tests, but it is not feasible in many cases due to the behavioral characteristics of points, inadequate modeling method in structural analysis, errors in loading tests, changes in strength and rigidity resulting from cross-sectional damage, etc. This problem can be more serious if bridge bearings have been damaged or were not installed and, consequently, the bearings do not function properly. This study produced results similar to actual behaviors using a structural analysis model built with support moment derived from the difference $\Delta{\delta}$ between measured deflection obtained by confining the cantilever segment of a solid beam and calculated deflection under a unrestrained condition. When the load carrying capacity of a bridge in operation was evaluated in consideration of the confinement condition of supports, the result was 15~19% lower than load carrying capacity calculated by the existing method.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.448-456
• /
• 2003

The prime objective of many facial wrinkle-reduction treatments is to achieve visible improvement. Thus the visibility of before/after treatment differences is often part of an efficacy assessment. This paper investigates whether the background knowledge of the people acting as observers in such assessments is of impact on the results: e.g. the subjects themselves are familiar with their faces, skin professionals have much experience in judging skin quality, and thus both might be more sensitive to small changes. In a clinical study 44 Female subjects were regularly treated during a period of 12 weeks with one of three wrinkle-reduction methods: K, Land M (placebo). Photographs were taken before treatment and at 6 and 12 weeks. The photographs were judged by 3 types of observers:ㆍ24 Lay observers were given the 0＆6-week and the 0＆12-week photo pairs of all subjects to indicate the one with the least wrinkles in a two-alternative forced-choice (TAFC) procedure.ㆍThe subjects themselves were given the 0＆6-weel and the 0＆12-week pair of their own photos (8 replications) to indicate the photo with the least wrinkles (TAFC).ㆍA trained panel of skin professionals (N=3) each gave 9-point Fitzpatrick wrinkle-severity scores for all individual 0-week and 12-week photos. We found that the lay observers perceived the same differences as the subjects themselves: significant improvements after 12 weeks for treatment K (p<0.0005 and p=0.005, respectively), no visible effects for treatments Land M, and, most importantly, a significant difference between treatments K and M/placebo (p=0.02 and p=0.04, respectively). Also the trained panel found this difference between K and M (p=0.013), but here it was due to a significant deterioration over time of the 'placebo-treated' wrinkles (M, p=0.03). Thus in conclusion we have found no indications that extra knowledge - in the form of familiarity with the own face or in the form of professional training - results in the identification of more treatments that show significantly visible wrinkle-reduction.

• Korean Security Journal
• /
• no.9
• /
• pp.237-260
• /
• 2005

Development of IT technology as well as arrival of information-oriented society raise the curtain of 'the era of Ubiquitous Computing', implying accessing computers beyond boundary of time and space. In this era, it is expected that IT paradigms and life-styles would be transformed immensely above the experiences of 20th century. However, improvement of technology summons a new risk of cyber terrorism which have not been in the past. Thus, it is urgent to prepare for the threats in the national level. This paper point out five major threats relating to 'the security in the era of Ubiquitous Computing'. : First, spread of threats in connection with BcN establishment, second, vulnerable information-security for wireless communication, third, leakage of private information, fourth, cyber terror and deterioration of security, fifth, security problems of Korea including the drain of military information and solutions in the views of organization, personnel, technology and budget, comparing with other countries.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.99-105
• /
• 2011

In this paper, we proposed a method for estimating an accurate gamut based on segment maxima method. According to the number of segments in the segment maxima, a local concavity is generated in the vicinity of lightness axis or a gamut is reduced in high chroma region. It induces artifacts or deterioration of the image quality. To remove these artifacts, the number of segment is determined according to the number of samples. and a local concavity is modified by extending a detected concave point to the line connecting two adjacent boundary points. Experimental results show that the contours in a uniform color region and speckle artifacts from the conventional segment maxima algorithm are removed.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.108-115
• /
• 2001

In this paper, we analyzed the properties change of electric wire when the thermal stress was applied to 600V grade polyvinyl chloride insulated wire (IV). In the structure analysis, normal wire has the properties of direction on the surface, but in case of deteriorated wire at above $400^{\circ}c$, it formed the carbide, the crack and the crystal. The surface composition rate of normal wire was Cu : 100%, but the section composition of the deteriorated wire at $800^{\circ}c$ showed Cu : 78.89%, O : 21.11%. In result of analyzing the differential scanning calory of copper wire, the new reaction peak was observed on the deteriorated wire at above $700^{\circ}c$. In case of the deteriorated wire as $150^{\circ}c$ at the differential thermal analysis, an endothermic reaction appeared at $264^{\circ}c$ lower than the reactive point of normal wire. The occupation rate of oxygen according to the deterioration of copper wire is about 20% at $500^{\circ}c$.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.4
• /
• pp.377-388
• /
• 2006

Most structures experience deterioration after construction. A routine inspection and maintenance must be accomplished for the efficient use of the structures. The routine inspection will play a major role on the determination of maintenance period and method. This study aims development of an automated tunnel inspection system based upon a 3 dimensional laser scanner. As for the initial stage of the project, a prototype tunnel scanner has been developed. The development of a tunnel scanner prototype follows comparison between image scanning and laser scanning system and investigation on the applicability and adaptivity of the scanners to the railway tunnel scanner. The applicability of the laser scanner on the railway tunnel has been confirmed from the pilot test by using commercialized general purpose close range laser scanner and applicability of a laser scanner as a railway tunnel scanner has been checked. From the result, a prototype of railway tunnel scanner has been built and the calibration of the system was carried out. Finally the developed tunnel laser scanner has been applied to different shapes and sizes of tunnels in use.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.245-251
• /
• 2014

The aim of this study was to estimate the shelf life of butter and cheese products, with shelf life being a guide used to determine the storage period of food before deterioration. Butter and cheese samples stored at $10^{\circ}C$ and $15^{\circ}C$ had a shelf life of 221 d, while those stored at $25^{\circ}C$ and $35^{\circ}C$ had a shelf life of 109 d. Quality changes, including total cell count, coliform counts, Listeria monocytogenes counts, acid value, moisture content, pH, acidity and overall sensory evaluation, were monitored. In order to pass the overall sensory evaluation, a quality score of 5 points on a 9-point scale was required. For other quality criteria, legal quality limits were established based on the "Process Criteria and Ingredient Standard of Livestock Products" by the Animal, Plant and Fisheries Quarantine and Inspection Agency (Republic of Korea). The nonlegal quality limit was estimated by regression analysis between non-quality criteria (y) and overall sensory evaluation (x). The shelf life was estimated based on the number of days that the product passed the quality limit of the quality criteria. The shelf life of samples stored at $10^{\circ}C$, $15^{\circ}C$, $25^{\circ}C$ and $35^{\circ}C$ was 21.94, 17.18, 6.10 and 0.58 mon, respectively, for butter and 10.81, 9.47, 4.64 and 0.20 mon, respectively, for cheese.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1114-1123
• /
• 2015

Bushing is the key link to connect outer and inner insulating systems and also the essential electric accessory in electric power system, especially in the high voltage engineering (AC 1000kV, DC 800kV). This paper presented the experimental research of thermal aging characteristic of oil-paper insulation used in bushing. A thermally accelerated aging experiment at 90℃ was performed. The bushing models containing five layers of paper were sealed into the aging vessels and further aged for 250 days. Then several important parameters associated with the aging were observed and evaluated. The results showed that the degree of polymerization (DP) of papers gradually decreased. The DP values of outermost layer and middle layer fit well into the second-order kinematic model and first-order kinematic model, respectively. Less deterioration speed of the inter-layer paper than outer layer was confirmed by the variation of DP. Hydrolysis was considered as the main cause to this phenomenon. In addition, the logarithm of the furfural concentrations in insulation oil was found to have good linear relationship with DP of papers. Interestingly, when the aging time is about 250 days and DP is 419, the aging process reaches an inflection point at which the DP approaches the leveling off degree of polymerization (LODP) value. Both tanδ and acid number of oils increased, while surface and volume resistivity of papers decreased. The obtained results demonstrated that thermal aging and moisture absorbed in papers brought great influence to the degradation of insulating paper, leading to rapid decrease of DP and increase of the tanδ. Thus, the bushing should be avoided from damp and real-time monitoring to the variation of tanδ and DP values of paper is an effective way to evaluate the insulation status of bushing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1064-1072
• /
• 2001

It is very important to evaluate material degradation like temper and carbide embrittlements to secure the reliable and efficient operational conditions and to prevent brittle failure in service. The extent of material deterioration can be accurately evaluated by mechanical test such as impact test or creep test. But it is almost impossible to sample a large specimen from in-service plants. Thus, the material degradation evaluation by a non-destructive method is earnestly required. Recently the non-destructive test technique which uses the grain boundary etching characteristics owing to the variation of material structures has been proposed. However the program for material degradation evaluation using the grain boundary etching method(GEM) in Windows 98 domain doesnt be developed now. The aims of this paper are to develop the program and to complete the new master curve equations for the evaluation of material degradation on in-serviced high temperature components.

• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.53-62
• /
• 2005

Efficient snow-removing work is one of important processes of winter road management. Calcium chloride has been used as a typical deicing agent in Korea. It presents superial performance as snow deicing agents, however it has been known to give serious environmental problem and to deteriorate durability of concrete structure in road by corrosion. The environment-friendly road deicing agents made from the waste material which is liquid phase organic matter that is Ca Mg and reactant of organic acid (nitric acid and propionic acid) have been introduced by number of researchers. They indicated the calcium magnesium salt of organic acids have advantage over the calcium choride in terms of lower production unit cost by resources recycling and can solve environmental problem and durability deterioration of structures. In this study, the deicing performance of calcium magnesium salt of organic acids(CMO) is investigated based on the series of experiments including the test for heat of dissolution, freezing point, ice melting test and ice penetration test.