• 대한의용생체공학회:의공학회지
• /
• 제2권2호
• /
• pp.83-88
• /
• 1981

A method of detecting abnormal spikes occuring in the EEG of subjects suffering from epilepsy is studied. The detection scheme is to take the first derivative of EEG and to determine if it exceed some threshold value. This study is focused on the digital signal processing for detecting abnormal spikes using microcomputer.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2006년도 제5회 추계학술대회 및 정기총회
• /
• pp.37-44
• /
• 2006

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.752-755
• /
• 2000

This paper describes a new algorithm for active power filters which can be control source current symmetrically under unbalanced condition in power system. Positive sequency voltage is detected by symmetrical coordinate method and compensating reference current of active power filters is calculated using by accurate phase angle information of positive sequency voltage. The basic principle of the proposed method is described in detail and the conventional and proposed phase detecting methods are compared and discussed through the simulation results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.147-150
• /
• 2000

Manual and predictive defrosting method is used in current refrigerators, which have several problems in terms of energy consumption and efficiency. fuming the defrosting system on by the amount of frost remains to be an important problem which has to be improved by refrigerator manufacturers. The sensing of the amount of frost by FDS(Frost Detecting Sensor) and its proper mounting point are investigated in the paper. Also the realization of actual defrosting system through experiments of operation, energy consumption and sensing mechanism is presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2124-2127
• /
• 2003

This paper suggests user interface method with wearable computer by means of detecting gaze under HMD, head mounted display, environment. System is derived as follows; firstly, calibrate a camera in HMD, which determines geometrical relationship between monitor and captured image. Second, detect the center of pupil using ellipse fitting algorithm and represent a gazing position on the computer screen. If user blinks or stares at a certain position for a while, message is sent to wearable computer. Experimental results show ellipse fitting is robust against glint effects, and detecting error was 6.5％, and 4.25％ in vertical and horizontal direction, respectively.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.34-40
• /
• 2011

This paper is purposed to develop an leakage current detecting system(LCDS) which can prevent electrical fires on breaker capacity expansion as well as ruptures of XL(Extra long) pipelines and power failure by operation of ELB(Earth leakage breaker) at auto water machine in winter. In order to develop LCDS, this paper studied field state investigation, field state experiment, development of leakage alarm system and verification experiments. Field states investigation at livestock companies(10 companies) in cheong-won location to deduce the problems of auto water machine is analyzed. The field state experiment is conducted at B livestock company in cheong won location. The field state experiment method is measured with leakage current when ELB tripped by environment factor(fine, cloudy, and rainy day). The LCDS is developed as MCU(Micro Control Unit) part applied leakage current values at B livestock company. Verification experiments for the leakage current detecting system were conducted by two methods of current supply and field test. Results show that LCDS suggested in this paper are valuable and usable in auto water machine based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in livestock.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.230-236
• /
• 2006

For a short-term measurement to reduce an accident on a railroad crossing, it is necessary to find out the weakness and problems of existing equipment in the railroad transportation system. The analysis of railroad crossing accidents shows that main causes of accidents (24.9%) are the careless driving including an engine problem, damage on the safety equipment, slide on the snow, and an engine stop on the railroad crossing. Therefore, it is required to install a sensor, or to make a crossing gate at the exist for detecting obstacles on a railroad to prevent collisions among trains. This paper suggests 'a panel sensor using the strain gauge' to make up the weaknesses of the sensing Dead Zone, which are caused by using a laser method, and to detect any small objects passing railroads in order to reduce the errors, which are occurred in the earth magnetic field for controlling Exit Slide Crossing Arm Detector. The device, suggested in this paper, is verified with detecting any small objects passing the railroad, with judging entry decision clearly, and with controlling passing gate and obstruction warnings/cautions obstacles at the same time, through an experimental test.

• 드라이브 ㆍ 컨트롤
• /
• 제19권2호
• /
• pp.27-35
• /
• 2022

This study presents one man-portable, hazardous gas detecting and capturing robot. The robot can be fit in the trunk of a sedan car. Its weight is less than 20 kg. A dedicated gas intake mechanism is proposed for the robot. The robot can detect and capture gases at a height of 2 m above the ground, although the height of the robot is about 0.2 m. The performance of the gas intake mechanism is verified through computational fluid dynamics (CFD) analysis and experiments. Its gas detecting signals were acquired by serial communication and processed in Robot Operating System (ROS) based control software. The proposed robot can successfully move on rough terrains such as stairs, sand roads, and rock roads.

• 한국항해학회지
• /
• 제24권5호
• /
• pp.435-441
• /
• 2000

This paper deals with the development of RACOM(Radar Signal Detecting ＆ Processing Computer). RACOM is a radar display system specially designed for radar scan conversion, signal processing and PCI radar image display. RACOM contains two components； i )RSP(Radar Signal Processor) board which is a PCI based board for receiving video, trigger, heading & bearing signals from radar scanner ＆ tranceiver units and processing these signals to generate high resolution radar image, and ⅱ）Applications which perform ordinary radar display functions such as EBL, VRM and so on. Since RACOM is designed to meet a wide variety of specifications(type of output signal from tranceiver unit), to record radar images and to distribute those images in real time to everywhere in a networked environment, it can be applicable to AIS(Automatic Identification System) and VDR(Voyage Data Recorder).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.429.1-429.1
• /
• 2014

We present a method of surface functionalization of a single layer graphene for linking and detecting MDA-MB-231 human breast cancer cell. The methodology is done by utilizing 1-pyrenebutanoic acid and succinimidyl ester for immobiling CD44 antibodies. This work shows that the single layer graphene is an efficient fixing substance to capture the MDA-MB-231 human breast cancer cell, selectively. The immobilization method of the cancer cell on the graphene layer will be an effective cell counting system. Moreover usage of the linking with non-covalent bonding is expected to develope a sensor scheme of electrical cell-detecting diagnosis system.