• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.4-31
• /
• 2018

The Neolithic pottery excavated from the Jungsandong site has been classified into four types of pottery (I: feldspar type, II: mica type, III: talc type and IV: asbestos type) according to their mineral composition. These four types of potteries generally appear to have undergone incomplete firing, while the level of oxidation in the type I pottery objects, which have a relatively higher clay content, was found to be particularly low. The type III objects, which have a high talc content, are judged to have been somewhat slow in removing carbon because they contain saponite belonging to the smectite group. Of the four types of pottery, type IV showed the highest redness and the most uniform characteristics, thus indicating a good level of oxidation. In particular, fixed carbide (C; 33.7 wt.%) with a thickness of about 1mm, and originating from organic substances, was detected inside the walls of the type I pottery, while the deep radial cracks in the outer surfaces of the pottery are thought to have been caused by repeated thermal shocks. Given that all of the pottery except for the type I artifacts are considered to be have been made for storage purposes, those containing talc and tremolite are easy to done liquid storing vessels based on an analysis of their material characteristics. As for the type II relics, which are composed of various minerals and exhibit poor physical properties, they seem to have been used for simple storage purposes. As domestic talc and asbestos mines were concentrated in the areas of Gyeonggi, Gangwon, Chungbuk, and Chungnam, it seems likely that talc and tremolite were produced as contiguous minerals. Considering the distance between the remains in Jungsandong and these mines and their geographical distribution, there is a possibility - albeit somewhat slight - that these mines were developed for the mining of various minerals. Although ultramafic rock masses - such as serpentine capable of generating talc and tremolite - have not been found in the Jungsandong area, limestone and biotite granite containing mica schist have been identified in the northwestern part of Yeongjong Island, indicating that small rock masses might have formed there in the past. Therefore, it is judged necessary to accumulate data on pottery containing talc and tremolite, other than the remains in Jungsandong, and to investigate the rocks and soils in the surrounding area with greater precision. The firing temperatures of the pottery found at the Jungsandong site were interpreted by analyzing the stability ranges of the mineral composition of each type. As a result, they have been estimated to range from 550 to $800^{\circ}C$ for the type I artifacts, and from 550 to $700^{\circ}C$ for the type I, II and IV artifacts. However, these temperatures are not the only factors to have affected their physical properties and firing temperature, and the types, particle sizes, and firing time of the clay should all be taken into consideration.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.18 no.2
• /
• pp.35-42
• /
• 2018

Purpose: To follow up Korean patients with metabolic and endocrine disorders ascertained by Korea Genetics Research Center, and assess the long-term effectiveness of extended newborn screening program in Korea. Methods: From January 2000 to December 2017, tandem mass spectrometry and fluoroimmunoassay were employed in extended newborn screening (NBS). The NBS program obtained dried blood spots from 283,626 babies, 48 hours after birth, and screened for galactosemia, congenital hypothyroidism (CH), congenital adrenal hyperplasia (CAH), and 50 preventable inborn errors of amino acid, fatty acid, and organic acid metabolism. Results: 28 cases of amino acid disorders, 75 cases of organic acid disorders, 27 cases of fatty acid disorders, 51 cases of urea cycle disorders, 127 cases of CH, 14 cases of CAH, and 15 cases of galactosemia were ascertained through NBS and subsequent confirmatory laboratory tests. Patients with amino acid metabolic disorders, galactosemia, CH, or CAH were more likely to have a better long-term outcome if detected early. Early management of MSUD led to much better outcome in over 90%. Despite early intervention, 32% of other organic acidemia cases still resulted in developmental delay and neurological problems. Fatty acid disorders showed varied results; those with EMA and MCAD had a good outcome, but those with VLCAD had serious neurological problems and considerably higher mortality. 75% with UCD experienced serious neurological complications and higher mortality. Conclusion: The nation-wide NBS program must be accompanied by comprehensive long-term management and physician and family education of inborn errors of metabolism for a better outcome.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.19 no.1
• /
• pp.20-25
• /
• 2019

Very-long-chain acyl-CoA dehydrogenase (VLCAD) deficiency (OMIM#201475) is an autosomal recessively inherited metabolic disorder of mitochondrial long-chain fatty acid oxidation. The clinical features of VLCAD deficiency is classified by three clinical forms according to the severity. Here, we report a case of later-onset episodic myopathic form of VLCAD deficiency whose diagnosis was confirmed by plasma acylcarnitine analysis and" multigene panel multigene panel sequencing. A 34-year old female patient visited genetics clinic for genetic evaluation for history of recurrent myopathy with intermittent rhabdomyolysis. She suffered first episode of rhabdomyolysis with acute renal failure requiring hemodialysis at twelve years old. After then, she suffered several times of recurrent rhabdomyolysis provoked by prolonged exercise or fasting. Physical and neurologic exam was normal. Serum AST/ALT and creatinine kinase (CK) levels were mildly elevated. However, according to her previous medical records, her AST/ALT, CK were highly elevated when she had rhabdomyolysis. In suspicion of fatty acid oxidation disorder, multigene panel sequencing and plasma acylcarnitine analysis were performed in non-fasting, asymptomatic condition for the differential diagnosis. Plasma acylcarnitine analysis revealed elevated levels of C14:1 ($1.453{\mu}mol/L$; reference, 0.044-0.285), and C14:2 ($0.323{\mu}mol/L$; 0.032-0.301) and upper normal level of C14 ($0.841{\mu}mol/L$; 0.065 -0.920). Two heterozygous mutation in ACADVL were detected by multigene panel sequencing and confirmed by Sanger sequencing: c.[1202G>A(;) 1349G>A] (p.[(Ser 401Asn)(;)(Arg450His)]). Diagnosis of VLCAD deficiency was confirmed and frequent meal with low-fat diet was educated for preventing acute metabolic derangement. Fatty acid oxidation disorders have diagnostic challenges due to their intermittent clinical and laboratorial presentations, especially in milder late-onset forms. We suggest that multigene panel sequencing could be a useful diagnostic tool for the genetically and clinically heterogeneous fatty acid oxidation disorders.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.81-89
• /
• 2019

The major problem encountered during the storage of pig slurry (PS) is the release of huge amounts of greenhouse gases (GHGs), which are dominated by methane ($CH_4$). To reduce this, concentrated sulfuric acid has been used as an additive to control the pH of pig slurry to 5.0-6.0. However, other low-risk substitutes have been developed due to some limitations to its use, such as corrosiveness, and hazards to animal and human health. In this study, sugar addition was proposed as an eco-friendly approach for limiting $CH_4$ emission from PS during storage. The pH of PS has been reduced from $7.1{\pm}0.1$ (control) to $5.8{\pm}0.1$, $4.6{\pm}0.1$, $4.4{\pm}0.1$, $4.1{\pm}0.1$, and $4.0{\pm}0.1$, by the addition of 10, 20, 30, 40, and 50 g sugar/L, respectively. Lactate, acetate, and propionate were detected as the dominant organic acids and at sugar concentration above 20 g/L, lactate concentration represented 42-72% (COD basis) of total organic acids. For 40 d of storage, $20.6{\pm}2.3kg\;CO_2\;eq./ton\;PS$ was emitted in the control. Such emission, however, was found to be reduced to $8.7{\pm}0.4$ and $0.4{\pm}0.1kg\;CO_2\;eq./ton\;PS$ at 10 and 20 g/L, respectively. Small amount of $CH_4$ from PS at 10 g/L was emitted until 30 d of storage, while for rest of storage period, it has increased to $8.7{\pm}0.4kg\;CO_2\;eq./ton\;PS$ ( 40% of the control) when methanogens have recovered by increasing pH to 7.0. By the end of storage, VS and COD removal in the control reached 24% and 27%, while their ranges reached 15-4% and 12-17% in the sugar added experiments, respectively. It was found that more than 90% of COD removal was done by aerobic biological process.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.65-72
• /
• 2019

This study was aimed at investigating the levels of the natural preservatives of benzoic, sorbic and propionic acids in cereal grains, nuts and seeds. Benzoic and sorbic acid were analyzed by high-performance liquid chromatography with a diode-array detector (HPLC-DAD) and further confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), whereas propionic acid was analyzed using a gas chromatography-flame ionization detector (GC-FID) and further confirmed by gas chromatography-mass spectrometry (GC-MS). Benzoic, sorbic and propionic acids were found in 44, 22, and 550 samples out of 702 samples, respectively. From the total of 702 samples. The concentrations of benzoic, sorbic and propionic acid were ranged from not detected (ND) to 23.74 mg/L, from ND to 7.90 mg/L, and from ND to 37.39 mg/L in cereal grains, nuts and seeds, respectively. The concentration ranges determined in this study could be used as standard criteria in the process of inspecting cereal grains, nuts and seeds for preservatives as well as to address consumer complaints or trade disputes.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2019

The health benefits associated with consumption of fresh produce have been clearly demonstrated and encouraged by international nutrition and health authorities. However, since fresh produce is usually minimally processed, increased consumption of fresh fruits and vegetables has also led to a simultaneous escalation of foodborne illness cases. According to the report by the World Health Organization (WHO), 1 in 10 people suffer from foodborne diseases and 420,000 die every year globally. In comparison to other processed foods, fresh produce can be easily contaminated by various routes at different points in the supply chain from farm to fork. This review is focused on the identification and characterization of possible sources of foodborne illnesses from chemical, biological, and physical hazards and the applicable methodologies to detect potential contaminants. Agro-chemicals (pesticides, fungicides and herbicides), natural toxins (mycotoxins and plant toxins), and heavy metals (mercury and cadmium) are the main sources of chemical hazards, which can be detected by several methods including chromatography and nano-techniques based on nanostructured materials such as noble metal nanoparticles (NMPs), quantum dots (QDs) and magnetic nanoparticles or nanotube. However, the diversity of chemical structures complicates the establishment of one standard method to differentiate the variety of chemical compounds. In addition, fresh fruits and vegetables contain high nutrient contents and moisture, which promote the growth of unwanted microorganisms including bacterial pathogens (Salmonella, E. coli O157: H7, Shigella, Listeria monocytogenes, and Bacillus cereus) and non-bacterial pathogens (norovirus and parasites). In order to detect specific pathogens in fresh produce, methods based on molecular biology such as PCR and immunology are commonly used. Finally, physical hazards including contamination by glass, metal, and gravel in food can cause serious injuries to customers. In order to decrease physical hazards, vision systems such as X-ray inspection have been adopted to detect physical contaminants in food, while exceptional handling skills by food production employees are required to prevent additional contamination.

• Korean Journal of Poultry Science
• /
• v.46 no.1
• /
• pp.25-30
• /
• 2019

This study was conducted to investigate basic data of development for appropriate management system in broiler. Data such as ages at marketing, livability, body weight, etc. were collected from a total of 53 broiler farms located in Chungnam, Chungbuk, Jeollanam, Jeollabuk, Gyeongbuk. 1. Average of ages at marketing were 32 days. Those of windowless house and open-type house were 31.96 and 32.03 days, respectively. The significant difference among four seasons was highly found (P<0.001). The longest ages at marketing were 32.86 days in winter. Average of livability was 96.25%. According to type of chick house, those of windowless house and open-type house were 95.93% and 96.59%, respectively. The livability according to season showed significant difference (P<0.05). The highest livability was 97.39% in autumn. However, the lowest livability was 95.36% in summer. 2. Average body weight at marketing was 1.62 kg. The significant difference was found in marketing weight by season (P<0.05). The heaviest body weight was 1.65 kg in winter, but the lowest weight was 1.60 kg in summer. Average of FCR was 1.62. the significant differences according to the season were highly found (P<0.01). Especially, the best FCR was 1.59 in autumn. Average cycles of marketing was 5.70. The significant differences according to farms size were found (P<0.05), cycles of small farms and big farms were 5.8 and 5.3, respectively. The ages at marketing were highly correlated with marketing weight (r=0.684) and feed conversion (r=0.439). The correlation between feed conversion and livability was highly negative (r=-0.614). According to the above result, livability and body weight at marketing were badly detected in summer. In conclusion, broiler farms should be controlled through properly environmental management system for improvement of performances.

• Journal of Plant Biotechnology
• /
• v.45 no.4
• /
• pp.382-391
• /
• 2018

The objective of this study was to determine the most effective medium condition of shoot proliferation and root formation for the efficient in vitro micropropagation of M.26 (Malus pumila Mill). Simple sequence repeat (SSR) markers were used to analyze the genetic diversity of micro-propagated and greenhouse grown M.26. Shoot proliferation was carried out in MS (Murashige and Skoog) containing benzyladenin (BA, $0.5{\sim}5.0mg{\cdot}L^{-1}$) and thidiazuron (TDZ, $0.01{\sim}0.1mg{\cdot}L^{-1}$). The highest number of shoots (10.67 shoots per explant) was induced by adding BA at a concentration $1.0mg{\cdot}L^{-1}$. TDZ treatments caused higher hyperhydricity rate in cultured explants than in BA treatments. There was no significant effect of both BA and auxin on shoot proliferation, and the optimum proliferation medium for M.26 was MS medium containing $1.0mg{\cdot}L^{-1}$ BA. To find a suitable medium composition for shoot rooting, we tested different concentrations indole-3-butyric acid (IBA) and ${\alpha}$-naphthaleneacetic acid ($0.5{\sim}5.0mg{\cdot}L^{-1}$), MS medium (1/4-1), sucrose ($0{\sim}30g{\cdot}L^{-1}$). The shoots showed good rooting on half-strength MS medium containing $1.0mg{\cdot}L^{-1}$ IBA and $15-20g{\cdot}L^{-1}$ sucrose. The rooting rate (100%), number of roots (10.45 ~ 13.60 roots per explant), root length (7.41 ~ 8.33 cm), and shoot length (4.93 ~ 5.38 cm) were good on this medium. Fifteen SSR primers were detected in a total of 30 alleles in 20 micro-propagated plantlets, all SSR profiles from micro-propagated plantlets were monomorphic and similar to greenhouse grown control plantlet M.26 plant. The results indicated that M.26 micro-propagated plantlets were genetically stable.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.267-275
• /
• 2018

The purposes of this study were to analyze the mineralogical characteristics of slaked lime used for wall repair of traditional buildings in Bagan, Myanmar and to evaluate the physical properties of lime plaster produced by the same method as Bagan region. In the X-ray diffraction and thermal analysis of the Myanmar slaked lime, portlandite ($Ca(OH)_2$) and brucite ($Mg(OH)_2$) were detected as main constituent minerals, and a carbonate rock mainly composed of dolomite ($CaMg(CO_3)_2$) minerals may be used as a raw material to make slaked lime. The field-emission scanning electron microscope analysis showed that the Myanmar slaked lime was composed of irregularly shaped crystals of $0.5{\mu}m$ or larger and a small amount of $0.1{\mu}m$ of plate - like crystals. The size and uniformity of crystals in Myanmar lime is different from that of Korea slaked lime. This may be attributed to the effect of the mineral composition and the lime hydration method of Myanmar, which produces slurry by immersing the burnt lime in excess water for a long period of time. The compressive strength of the lime plaster in Myanmar resulted in a mean value of $1.13N/mm^2$ for the specimens cured for 28 days. The strength of the specimens with Bale juice was $1.03N/mm^2$, respectively. The lime is an air setting material that exhibits strength through long carbonation process. Therefore, it is necessary to evaluate physical properties according to curing period through long-term curing over 28 days in the future.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.29 no.4
• /
• pp.150-157
• /
• 2018

The Zygote arrest 1 (ZAR1) gene is known to affect early embryonic development in various vertebrates. In this study, we performed the association analysis to check whether there is any significant relationship between semen kinematic characteristics and the ZAR1 gene. To determine semen kinematic characteristics, we measured motility (MOT), straight-line velocity (VSL), curvilinear velocity (VCL), average path velocity (VAP), linearity (LIN), straightness (STR), amplitude of lateral head displacement (ALH), and beat cross frequency (BCF) of spermatozoa in boars. In order to detect single nucleotide polymorphisms (SNPs), we extracted genomic DNA from multiple Duroc boars, and then subsequently used them in sequencing reactions. As a result, three SNPs were detected in the intronic region of ZAR1 gene (g.2435T>C in intron 2, g.2605G>A and g.4633A>C in intron 3 ). SNPs g.2435T>C and g.2605G>A were significantly associated with MOT (p<0.01) and VSL (p<0.05), and g.4633A