• 복식
• /
• 제55권6호
• /
• pp.82-96
• /
• 2005

This study focuses on the bag design as a creative design resource rather than on typical bag design as shown in previous research. 1'he purpose of this study is to develop creative and harmonious upper garments in good combination of bags and the sides of clothing. This study was performed with female college students whose age are front 18 to 24. The results of this study are as follows. First, bags are ideal for creative fashion in respect that they reflect modern trend. Second, ornamental materials such as string, chain, and buckle, which used to be details of clothing, are useful to present the characteristics of bags more effectively. This result has shown that details of bags are important determinant of entire fashion details. Third, it expands the sphere of expression of the bag, so the possibility of expansion to a distinguished expression of fashion design is recognized. From the study, we understood the structural characteristics and changes of detail of bags, proposing that the bags take important part in fashion design developments.

• Earthquakes and Structures
• /
• 제5권2호
• /
• pp.143-160
• /
• 2013

This paper presents the results of an experimental program concerning the efficiency of a specific strengthening technique which utilizes a small steel link element connected to the R/C frame through bracing elements. Brittle types of failure, especially at the connections between steel and concrete elements, can be avoided by appropriate design of the local details. Five single storey one bay R/C frames scaled 1:3 were constructed according to older codes with substandard details. The first one was a typical bare reference frame. The other four were identical to the first one, strengthened by steel bracing elements. The behavior of the strengthened frames is described with respect to the reference bare frame. The concrete frames were constructed according to older code provisions by the use of smooth steel bars, low strength concrete, sparsely spaced stirrups and substandard details. The strengthening scheme aimed to the increase of both strength and deformation capacity of the original R/C frame. The inelastic deformations are purposely concentrated to a short steel link element connecting the steel bracing to the R/C frame. The results show that the steel link element can increase considerably the strength and the energy dissipation capacity of the frame.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권9호
• /
• pp.3745-3761
• /
• 2020

Low-rank representation methods already achieve many applications in the image reconstruction. However, for high-gradient image patches with rich texture details and strong edge information, it is difficult to find sufficient similar patches. Existing low-rank representation methods usually destroy image critical details and fail to preserve edge structure. In order to promote the performance, a new representation-based image super-resolution reconstruction method is proposed, which combines gradient domain guided image filter with the structure-constrained low-rank representation so as to enhance image details as well as reveal the intrinsic structure of an input image. Firstly, we extract the gradient domain guided filter of each atom in high resolution dictionary in order to acquire high-frequency prior information. Secondly, this prior information is taken as a structure constraint and introduced into the low-rank representation framework to develop a new model so as to maintain the edges of reconstructed image. Thirdly, the approximate optimal solution of the model is solved through alternating direction method of multipliers. After that, experiments are performed and results show that the proposed algorithm has higher performances than conventional state-of-the-art algorithms in both quantitative and qualitative aspects.

• Computers and Concrete
• /
• 제22권4호
• /
• pp.383-393
• /
• 2018

Infill wall strengthening method has been widely used for seismic strengthening of deteriorated reinforced concrete (RC) frame structures with non-seismic details. Although such infill wall method can ensure sufficient lateral strengths of RC frame structures deteriorated in seismic performances with a low constructional cost, it generally requires quite cumbersome construction works due to its complex connection details between an infill wall and existing RC frame. In this study, an advanced seismic strengthening method using externally-anchored precast wall panels (EPCW) was developed to overcome the disadvantage inherent in the existing infill wall strengthening method. A total of four RC frame specimens were carefully designed and fabricated. Cyclic loading tests were then conducted to examine seismic performances of RC frame specimens strengthened using the EPCW method. Two specimens were fully strengthened using stocky precast wall panels with different connection details while one specimen was strengthened only in column perimeter with slender precast wall panels. Test results showed that the strength, stiffness, and energy dissipation capacity of RC frame specimens strengthened by EPCWs were improved compared to control frame specimens without strengthening.

• 한국의류학회지
• /
• 제42권2호
• /
• pp.251-268
• /
• 2018

This study suggests a fashion design using aesthetic characteristics of works by Kate MccGwire, a modern sculptor paying attention to soft sculpture materials such as feathers. In this research on MccGwire works, their internal meanings may be derived as the dualism of familiarity, movement and consciousness. Works also have aesthetic characteristics of overlapping, fluidity and twist. Using such characteristics, 4 one piece dresses and 2 vest dresses were made. Research findings are as follows. First, aesthetic characteristics of MccGwire works could be expanded into expressive areas of silhouettes and details in fashion. Second, visual flow and concentration could be expressed by gradual coloration of feather colors. Third, dart manipulation could be applied naturally by details and curve silhouettes of fashion design. Fourth, touch of feather material could be expressed fully by leaving the edge of garments raw. Fifth, spatiality of fashion could be implemented partially by applying decorative saddle stitching to costume design details. This study explored a potential of soft sculpture occurred during a transitional process of objet pursued by 20th century's avant-garde artists applicable to fashion design ideas that suggested methods for contemporary creative design.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.83-90
• /
• 2008

The reinforcing steel process is composed of the development of placing drawing, cutting and bending, and the placement and fabrication of the reinforcement, and is participated in by reinforcement detailer, the fabricator and placer. Because the reinforcing steel process-from estimating and rebar detailing, to production, material tracking, billing, and general accounting-is conducted by many participant, reinforcement details based on building code and reinforcing bar detailing standards are essential. The process, however, holds some problems. Building code has been revised recently, and the utilization of placing drawings was proved to be low, and the reinforcement estimating in early stage of the process is below what is required for placement. Therefore, in this study, a survey was conducted to the reinforcement detailer, the fabricator and placer of domestic construction industry. According to the analysis of the survey, the reinforcement details on site was not standardized. The improvement in reinforcing steel detailing standards was sought by analyzing the results of the survey including reinforcement constructability.

• 패션비즈니스
• /
• 제8권1호
• /
• pp.91-106
• /
• 2004

This study focuses on the sportism expressed in the modern fashion. Many factors attribute to the advent of sportism such as rapid development and cultural changes toward sports, increase in leisure time, new fashion materials resulting from new technologies, youth culture and postmodernism. Designers gazing into the future are inspired by the details and functionality of clothing for snow boarding, skiing, rock-climbing and fitness. While the sportswear is the term whith stemmed from the need for functionally in sports, the Sportism is the style inspired by the formative elements, that is, the details, the silhouette, and the colors of the sportswear. New technologies for sports, the powerful influence of youthful culture, and the celebritizations of the sports stars made the sports look more popular. It can be categorized into three aesthetic values, i.e., the functional sportism, the street sportism, and the futuristic sportism. The functional sportism is expressed with the details of function, simplicity, and no useless ornament, the street sportism with fun, androgynous and unisex mode and the image of hip-hop look and traditional look, the futuristic sportism with new high tech fabrics and cyber style. The characters of these are a sence of unisex, sensualness, ostentation, renovation.

• 대한의용생체공학회:의공학회지
• /
• 제25권4호
• /
• pp.277-282
• /
• 2004

자동차 충돌 시 신체의 크기가 작은 여성 승객의 거동 및 상해 기구를 조사하기 위하여 5% percentile의 여성 유한 요소 모델을 개발하였다. 본 모델은 작은 신체 여성의 형상을 대표하는 분절된 강체와 해부학적으로 상세하게 묘사된 내부 요소들로 구성되어 진다. 분절된 강체 모델은 상세한 골격 및 장기 등의 플랫폼 역할을 수행하며 또한 작은 여성 승객의 전체적인 운동역학을 표현하기도 한다. 본 논문에서는 분절된 강체 모델의 체형 구성 및 유한요소 구조 등에 대한 자세한 내용이 모델의 검증과 함께 소개되어 진다. 모델링의 후반부 즉 작은 여성의 해부학적으로 상세한 내부 요소는 연이은 part II 논문에서 다루게 된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1129-1135
• /
• 1993

For successful implementation of robotic painting system, a structured design and analysis procedure is necessary. In designing robotic system, both functional and economical feasibility should be investigated. As the robotization is complicated task involving implementation details(such as robot selection, accessory design, and spatial layout) together with operation details, a computerized method should be sought. However, any conventional robotic design system and off-line programming system cannot accomodate such a need. In this research, we develop an interactive design support system for robotization of a cycle painting line. With the developed system called SPRPL(Simulation Package for Robotic Painting Line) users can design the painting objects(via FRAME module), select robot model (ROBOT), design the part hanger (FEEDER), and arrange the workcell. After motion programming (MOTION), the design is evaluated in terms of: a) workspace analysis, b) coating thickness analysis, and c) cycle time (ANALYSIS). By iterative design and evaluation procedure, a feasible and efficient robotic design can be attained. As the developed system has motion planning and analysis features, it can be also used as an off-line robot programming system in operation stage. Including the details of each module, this paper also presents a case study made for an actual painting line.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.119-126
• /
• 2000

Reinforced concrete structural walls are widely known to provide an efficient lateral load resistance and drift control. However, many reported researches on them are mostly limited to the RC structural walls reinforced according to seismic details. When the pushover analysis technique is used for the prediction of inelastic behavior of frame-wall structures for the seismic evaluation of existing buildings having non-seismic details, the reliability of this analysis method should be checked by the test results. The objective of this study is to verify the correlation between the experimental and analytical responses of a high-rise reinforced concrete frame-wall structure having non-seismic details by using DRAIN-2DX program[11] and the test results performed previously[1]. It is concluded that the behavior of the frame-wall model is mainly affected by the fixed-end rotation(uplift at base) and bending deformation of the wall and that the analysis with the LINKS model[10] in DRAIN-2DX describes them with good reliability.