• 한국산업정보학회논문지
• /
• 제12권5호
• /
• pp.163-172
• /
• 2007

BSC(Balanced Scorecard)는 기업의 성과를 총체적으로 측정할 수 있는 도구로 이용되어 왔다. BSC를 이용해 도출된 지표는 서로 다른 단위를 가지므로 측정값을 통해 개별적 지표의 달성도를 파악할 수는 있지만, 전체적인 기업의 전략 달성도를 측정하기는 어렵다. 이를 해결하기 위해 BSC의 서로 다른 지표값에 대한 정규화된 Total Score산출이 필요하다. 본 연구에서는 먼저 AHP(Analytical Hierarchy Process)를 이용하여 BSC 지표들의 가중치를 결정한 후 만족도 함수를 이용하여 서로 다른 측정단위를 가진 BSC지표 측정값을 정규화하여 Total Score를 산출하고자 한다. 산출 방법의 타당성을 검증하기 위하여 CRM의 효과성 측정에 본 방법을 적용한 사례연구를 수행하였다.

• Advances in materials Research
• /
• 제5권2호
• /
• pp.67-80
• /
• 2016

The objective of the present work is to optimize process parameters namely, cutting speed, feed rate, and depth of cut in milling of AISI 304 stainless steel. In this work, experiments were carried out as per the Taguchi experimental design and an $L_{27}$ orthogonal array was used to study the influence of various combinations of process parameters on surface roughness (Ra) and material removal rate (MRR). As a dynamic approach, the multiple response optimization was carried out using grey relational analysis (GRA) and desirability function analysis (DFA) for simultaneous evaluation. These two methods are considered in optimization, as both are multiple criteria evaluation and not much complicated. The optimum process parameters found to be cutting speed at 63 m/min, feed rate at 600 mm/min, and depth of cut at 0.8 mm. Analysis of variance (ANOVA) was employed to classify the significant parameters affecting the responses. The results indicate that depth of cut is the most significant parameter affecting multiple response characteristics of GFRP composites followed by feed rate and cutting speed. The experimental results for the optimal setting show that there is considerable improvement in the process.

• 한국조경학회:학술대회논문집
• /
• 한국조경학회 2007년도 Journal of Landscape Architecture in Asia Vol.3
• /
• pp.72-77
• /
• 2007

Civic participation in managing the work of a park is a natural experience, and urban culture has a role in forming and communicating ideas. However, when it comes to managing a copse, there is no clear scenic image. In this study, my intention was to determine a desirable scene involving a copse and suggest a target image for managing work from a scenic perspective. I selected 12 photographs and listed 10 pairs of adjectives that were judged to reflect the effect produced by the copse scene using the repertory grid development technique. In addition, I performed a scenic evaluation using the semantic differential(SD) method with each pair of adjectives. Factor analysis was performed based on questionnaire survey results, such that the scenic structure of the copse had a clear definition. In addition, the physical characteristics of the photographs were analyzed using Adobe Photoshop 6.0 and the correlations between the results of the questionnaire survey were understood using multiple regression analysis. A desirable scenic image of the copse became clear through this process and I was able to suggest various options of scenic images. Taking the aspects of urban culture into consideration, park improvement projects(including their planning stages) should be implemented by involving residents, which will lead to further development of park planning and maintenance theories and projects giving due consideration to residents' opinions.

• 한국항해항만학회지
• /
• 제35권2호
• /
• pp.121-130
• /
• 2011

The localization of vehicle is an important part of an unmanned vehicle control problem. Pseudolite ultrasonic system(PUS) is the method to find an absolute position with a high accuracy by using ultrasonic sensor. And Gyro is the inertial sensor to measure yaw angle of vehicle. PUS can be able to estimate the position of mobile robot precisely, in which errors are not accumulated. And Gyro is a more faster measure method than PUS. In this paper, we suggest a more accuracy method of calculating PUS which is numerical analysis approach named Newtonian method. And also propose the fusion method to increase the accuracy of estimated angle on moving vehicle by using PUS and Gyro integrated system by Kalman filtering. To control the 4WS unmanned vehicle, the trajectory following algorithm is suggested. And the new concept arbitration of goal controller is suggested. This method considers the desirability function of vehicle state. Finally, the performances of Newtonian method and designed controller were verified from the experimental results with the 4WS vehicle scaled 1/10.

• 한국식품영양과학회지
• /
• 제33권5호
• /
• pp.869-874
• /
• 2004

This study was conducted to investigate the effects of paprika juice on the quality characteristics of Jeung-Pyun (fermented and steamed rice cake). Jeung-Pyun was prepared with four different levels of orange paprika juice (0%, 10%, 25% and 50% replacement of water). The proximate composition analysis showed that moisture contents of Jeung-Pyun were 48.72∼49.36%, and crude protein, lipid and ash contents were 2.94∼3.13%,0.46∼0.63% and 0.60∼0.65%, respectively. The pH of Jeung-Pyun batters was decreased from 4.74∼4.83 to 4.27∼4.38 during 4 hours of fermentation at 35$^{\circ}C$. The maximum expanded volume was observed in control group, followed by 10% group, 25% group and 50% group and the volume expansion was decreased with the increased amount of paprika juice. The "L" value (lightness) was the highest in control group and decreased with paprika juice addition, while the "b" value (yellowness) was increased as the amount of paprika juice was increased. Rheology test showed that there were no significant differences in hardness an cohesiveness among four groups. Springiness and gumminess were the lowest in control group and increased with the increased amount of paprika juice. Results of sensory evaluation showed that there were no significant differences in scores of cell uniformity, sweetness, moistness and overall desirability between control and 10% group. Therefore. Jeung-Pyun prepared with 10% paprika juice was evaluated as the most acceptable one among test groups when compared to control.

• 기본간호학회지
• /
• 제20권2호
• /
• pp.118-128
• /
• 2013

Purpose: The purpose of this study was to identify the images of men as nurses held by high school boys, and to provide basic data about the desirability of nursing as a career choice for them. Method: Q-methodology which provides a method of analyzing the subjectivity of each item was used: The 35 high school boys classified 31 selected Q-statements into a normal distribution using a 9-point scale. The collected data was analyzed by the pc-QUNAL program. Results: Among the high school boys, three types of images of men as nurses were identified. Type I; A promising occupation for men through active way of thinking, Type II; Men working in a woman oriented field of work, Type III; A promising profession without any gender stereotype. Conclusion: The results of this study suggest that specific strategies should be developed to promote the choice of nursing among high school boys.

• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.501-513
• /
• 2020

In the present work, the optimization of machining parameters to achieve the desired technological parameters such as surface roughness, tool radial vibration and material removal rate have been carried out using response surface methodology (RSM). The hard turning of EN19 alloy steel with coated carbide (GC3015) cutting tools was studied. The main problem faced in manufacturer of hard and high precision components is the selection of optimum combination of cutting parameters for achieving required quality of surface finish with maximum production rate. This problem can be solved by development of mathematical model and execution of experiments by RSM. A face centred central composite design (FCCD), which comes under the RSM approach, with cutting parameters (cutting speed, feed rate and depth of cut) was used for statistical analysis. A second-order regression model were developed to correlate the cutting parameters with surface roughness, tool vibration and material removal rate. Consequently, numerical and graphical optimization were performed to obtain the most appropriate cutting parameters to produce the lowest surface roughness with minimal tool vibration and maximum material removal rate using desirability function approach. Finally, confirmation experiments were performed to verify the pertinence of the developed mathematical models.

• 농업생명과학연구
• /
• 제44권6호
• /
• pp.191-199
• /
• 2010

농작업을 수탁 대행하는 경제주체에 있어서 사업운영상 가장 중요한 문제가 되는 것은 농작업수탁요금 즉, 농기계임작업요금의 설정이 문제이다. 그리고 농기계 수탁작업의 주체는 농협, 지방자치단체, 농업경영인 등으로 다양하며, 따라서 임작업료의 요금설정체계도 다양하다. 본 연구에서는 원가회계의 측면에서 농업기계임작업의 요금설정방식으로서 원가계산모형을 활용하는 경우의 유용성과 문제점을 분명히 하고, 원가계산 시스템과 원가정보를 이용한 요금설정방식의 이론적 타당성을 제시하고자 한다.

• 한국어교육
• /
• 제29권1호
• /
• pp.53-84
• /
• 2018

The main purpose of this study is to investigate foreigners' perception regarding Korean business culture and Korean business culture education. People who participated in this study are six foreign workers after studying at the university or graduate school in Korea. A phenomenological qualitative research method was used in this study in order to elicit life experiences from foreign workers who were working in Korea business companies. Therefore, their experience regarding Korean business culture and business culture education were measured by in-depth interviews. This study shows that nun-chi, vertical relationships, and impatience of Koreans are the most difficult culture to foreign workers. They also feel difficulties regarding Koreans' lack of understanding about other cultures. Moreover, these were not difficult components within school life; rather, the most difficult aspects were that they have never learned about the Korean business culture before getting a job. The results show that international students who want to work in Korea companies need to study about the culture of Korean business and revealed the desirability to learn. These results can be used as a foundation for understanding some contents and criterion of Korean business culture and education.

• 지식경영연구
• /
• 제20권3호
• /
• pp.39-47
• /
• 2019

Response surface methodology (RSM) is a group of statistical modeling and optimization methods to improve the quality of design systematically in the quality engineering field. Its final goal is to identify the optimal setting of input variables optimizing a response. RSM is a kind of knowledge management tool since it studies a manufacturing or service process and extracts an important knowledge about it. In a real problem of RSM, it is a quite frequent situation that considers multiple responses simultaneously. To date, many approaches are proposed for solving (i.e., optimizing) a multi-response problem: process capability function approach, desirability function approach, loss function approach, and so on. The process capability function approach first estimates the mean and standard deviation models of each response. Then, it derives an individual process capability function for each response. The overall process capability function is obtained by aggregating the individual process capability function. The optimal setting is given by maximizing the overall process capability function. The existing process capability function methods usually use the arithmetic mean or geometric mean as an aggregation operator. However, these operators do not guarantee the Pareto optimality of their solution. Moreover, they may bring out an unacceptable result in terms of individual process capability function values. In this paper, we propose a maximin-based process capability function method which uses a maximin criterion as an aggregation operator. The proposed method is illustrated through a well-known multiresponse problem.