• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.869-874
• /
• 2010

A research for the optimal design of microwave absorbing material featuring for the broadband has been conducted to apply to warship. A multilayered structure was suggested using wave absorbing layers and resistance layer to perform high performance in broadband frequencies. For the optimization of the wave absorbing characteristics, the thickness and permittivities of the absorbing layers as well as the surface resistance of the resistant layer were determined using genetic algorithm. The data base of permittivities related to the density of the dielectric materials and loss materials was obtained by the experiments for the dielectric constants of the absorbing layers, furthermore, the results were numerically expressed and used for the optimization.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.81-81
• /
• 2020

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.245-251
• /
• 2005

연안 및 항만시설물의 설계에서 심해 설계파 및 풍속은 매우 중요한 설계 파라메타이다. 특히, 최근 부각되고 있는 방재공학 측면에서 이러한 정보에 대한 분석단계는 필수적이라 할 수 있다. 본 연구에서는 완도관측소의 기상연보에서 제시한 1978년부터 2003년까지의 풍속자료와 한국해양연구원 파랑정보시스템에서 제공하는 16방향별 최대 유의파 산출자료를 이용하여 극치분석을 수행하였다. 특성분석에 사용된 극치분포함수는 Weibull, Gumbel, Log-Pearson Type-III, Normal, Lognormal, Gamma 분포이며, 각 분포함수의 매개변수는 모멘트법, 최우도법 그리고 확률 가중 모멘트법으로 추정하였다. 또한, 극치분포함수의 적함성은 5${\%}$의 유의수준 즉, 95${\%}$신뢰도 수준으로 $x^{2}$및 K-S 검정을 실시하였다. 그 결과, 한국 남서연안의 심해 설계파고는 Gumbel 분포형이 가장 적합한 모형으로 파악되었으나, 본 연구의 대상영역에 적합한 모형은 각각의 극치자료에 따라 선정된 확률분포에 의해 다르게 나타났다.

• 한류연구
• /
• 제1권1호
• /
• pp.31-36
• /
• 2022

Recently, as the status of South Korean popular culture has risen, the Korean Wave is gaining popularity not only in Asia but also in Europe, America, and South America, and is currently at the center of the global cultural phenomena. Among them, in particular, the cultural content industry has been developing rapidly thanks to the Korean Wave. Currently, the Korean Wave is spreading all over the world while bringing about positive effects to South Korea. In fact, until 2017, political and social issues such as 'North Korea/North Korean nuclear weapons' and 'Korean War' were considered as the images associated with South Korea, but from 2018, it has been shown that all images associated with South Korea are cultural content except for 'IT industry'. Given the economic effects that can be obtained not only from the positive associated images of South Korea per se but also from the complex action with various industries in South Korea, the craze for the Korean Wave can be viewed as affecting the overall national prestige of South Korea. For the steady vogue of the Korean Wave, thorough investigation of the Korean Wave and understanding of the expectations of consumers of the Korean Wave seem to be necessary

• Structural Engineering and Mechanics
• /
• 제82권4호
• /
• pp.491-502
• /
• 2022

A model experiment with a scale of 1:150 has been conducted to investigate the dynamic responses of a freestanding four-column bridge tower subjected to regular wave, random wave and coupled wave-current actions. The base shear forces of the caisson foundation and the dynamic behaviors of the superstructure were measured and analyzed. The comparisons of the test values with the theoretical values shows that wave-induced base shear forces on the bridge caisson foundation can be approximated by using a wave force calculation method in which the structure is assumed to be fixed and rigid. Although the mean square errors of the base shear forces excited by joint random wave and current actions are approximately equal to those excited by pure random waves, the existence of a forward current increases the forward base shear forces and decreases the backward base shear forces. The tower top displacements excited by wave-currents are similar to those excited by waves, suggesting that a current does not significantly affect the dynamic responses of the superstructure of the bridge tower. The experiment results can be used as a reference for similar engineering design.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.268-273
• /
• 2004

A study on experimental method of the model test for the impulse turbine is carried out. the wave simulator is used to reproduce the real wave condition. It controls two parameter correspond to wave height and wave frequency. The optimum design which is reported by T. Setoguchi is manufactured and tested for the validation of our test facilities. The comparison of model test show that our facilities produce little bit higher efficiency at maximum efficiency point. To increase the efficiency of turbine, the new rotor with negative tip clearance is designed and being tested.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.655-658
• /
• 1995

Recently years, these has been considerable interst in analysis of stress under shock wave. Stress wave is important problem for mechanical device and structural design. This paper was studied to develope the finite element program to analysis single materials and composite materials. This paper is studied for the stress wave propagation of single materials and predicted reflection of stress wave in materials. the developed program was able to analysis of stress wave propagation of composite materials and descride reflection of stress wave at contact surface.

• 설비공학논문집
• /
• 제13권7호
• /
• pp.653-665
• /
• 2001

The characteristics of the pulsating flow in a hydraulic pipe have been investigated. It is necessary to study the power control of the power transmission system in the landing gear system of aircraft and the design of robots. In this system, the power transmission pipeline is composed of a hydraulic system, and the operating flow is unsteady flow. The wave equation varying with frequency is analyzed in order to investigate the characteristics of unsteady flow in such a pipe. This wave equation involves the propagation coefficient in terns of frequency and viscosity. The theoretical result of this wave equation are compared with experimental result. Each wave equation, varying with the propagation coefficient, is analyzed theoretically. then, a sinusoidal wave generator is built in order to make better sinusoidal waves, and a rectifier is built to eliminate the noise from the hydraulic pump. The theoretical results of the wave equation in the flow of viscous fluid agree well with experimental results.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.37-46
• /
• 2004

Coil spring of automobile suspension system is very important to safety and dynamics of passenger car and requires a highly advanced quality control during manufacturing processes. Surface cracks on the coil spring rod produced by mechanical machining and heat treatment may cause a severe accident and large cost to the manufacturer. In order to detect surface cracks of the rod, guided wave technique is applied for a fast total volumetric inspection. Pochhammer equation is studied to investigate the dispersion characteristics of the guided wave in the spring rod and optimal wave modes sensitive to the surface crack are selected experimentally to design the experimental arrangement for the generation of guided wave. Rod samples with different size of artificial axial EDM notch on the surface ranging from 50${\mu}{\textrm}{m}$ to 1 mm are examined by guided wave and inspection results discussed.

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2004

In this paper, the performance of a wave absorbing system using an inclined punching plate, was investigated. Using the multi-domain boundary element method (BEM), the reflection coefficients of an inclined punching plate were tested with various design parameters, such as inclined angle, porosity, and wave frequencies. To confirm the numerical solutions, the systematic model test was conducted at 2-D tank and square tank. The numerical results were in good agreement with the experimental results within the entire frequency range. It was found that an inclined punching plate had an excellent wave absorbing efficiency, compared to a horizontal one. Also, the optimal range of an inclined angle had an excellent wave absorbing efficiency, compared to a horizontal one the optimal range of the inclined angle is 10°<β<20°. The developed wave absorber was installed at KRISO's square basin, and is working effectively for various model tests.