• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.83-89
• /
• 2020

Personal air vehicle (PAV) is considered by aviation engineers as a solution to provide fast urban mobility. The purpose of designing a optionally piloted PAV (OPPAV) is to provide an individual air vehicle. The airframe structure is designed with high strength carbon fiber composite to reduce the aircraft weight. This paper presents an overview of sizing process for OPPAV at the conceptual design level. It consists of load analysis, structural sizing and development of efficient design allowable values for composite material. The weight is estimated based on sizing process, including strength and stiffness requirements. The objective of this study is to present a overview of structural sizing procedure and fast tool for preliminary design phases.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.143-150
• /
• 2001

In this paper, the effects of vehicle loads on flat slab system are investigated based on the previous studies on beam-girder parking structural system. The influence surfaces of flat slab for typical design section are determined for the purpose of obtaining member forces under vehicle loads. In addition, the equivalent vehicle load factors for flat slab parking structures are suggested using neural network. It has been found that vehicle load effects of flat slab system are dominant for the center positive moment in both column and middle strip, as like beam-girder parking structural system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.233-240
• /
• 2002

In this paper, the effects of vehicle loads on flat slab system are investigated on the basis of the previous studies for beam-girder parking structural system. The influence surfaces of flat slab for typical design section are developed for the purpose of obtaining maximum member forces under vehicle loads. In addition, the equivalent vehicle load factors for flat slab parking structures are suggested using artificial neural network. The network responses are compared with the results by numerical analyses to verify the validation of Levenberg-Marquardt algorithm adopted as training method in this paper. Many parameter studies fur the flat slab structural system show dominant vehicle load effects at the center positive moments in both column and middle strips, like the beam-girder parking structural system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.371-375
• /
• 1991

The purpose of this paper is the design of a controller of electric actuator for high speed underwater vehicle which is robust against hydro load torque. For this purpose, we design the controller of PD & VSC control schemes. Under proper assumption of the hydro load torque, the tracking performances of these schemes are analyzed through the computer simulation, and the results are presented.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.694-699
• /
• 2003

Rotem Company has designed and manufactured a railway vehicle body according to the European standard EN 12663, which applies to all railway vehicles within the EU(European Union) and EFTA(European Free Trade Association) territories. EN 12663 specifies the loads vehicle bodies shall be capable of withstanding, identifies how material data shall be used and presents the principles to be used for design verification by analysis and test. The structural design of railway vehicle bodies depends on the loads they are subjected to and the characteristics of the materials they are manufactured from. However, the structural requirements of EN 12663 are very different from those of existing Korean and Japanese regulations and standards. Therefore, in order to fulfill the structural requirements, Rotem Company has carried out Finite Element Analysis (FEA) and has performed load tests on the vehicle body according to EN 12663. This research contains the results obtained by the analysis and the load tests. The analysis is carried out using I-DEAS Master Series 8 and specially designed test jigs and equipment are used for the load tests.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.675-683
• /
• 2018

In this paper, we have proposed a design and verification methods of electrical system and power loads for unmaned aeriel vehicles(UAVs) through electrical load analysis. In order to meet a UAV system requirement and electrical system specifications, we have designed an electrical power system for efficient power supply and distribution and have theoretically analyzed the power loads according to the power consumption and power bus design of UAV. Using electrical system rig, the designed electrical power system has been experimentally verified. Also, we have performed several flight tests to verify the UAV electrical system and power loads. It is concluded that the proposed design and verification method of electrical system for UAV system.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.29-37
• /
• 2006

The primary objective of this study is to characterize traffic axle loadings that consider Korea specific traffic conditions for developing mechanistic-based pavement design method as a part of Korea Pavement Research Program(KPRP). Although the concept of equivalent single axle load(ESAL) has been generally used since the 1960s for the pavement design, the mechanistic-based pavement design procedure requires more accurate axle loading data on the specific pavement. In this study, axle loading data were collected according to vehicle type and highway functional classification. Axle-load spectrum was then standardized by cumulative density function(cdf), because the axle load spectrum could vary from the observed site, truck traffic volume, and truck type, Finally, this study presented the procedure and S-shaped exponential models for characterizing axle load spectra according to vehicle type and highway functional classification.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.1
• /
• pp.44-48
• /
• 2009

About past 30 years, we don't have enough consideration and investigation about DB-Load. While 30 years, weight of truck is heavier and condition of roads differ, so many conditions of roads and vehicles are changed. We must consider change of many conditions and we must improve laws about maintenance of DB-Load. and now we must consider that low grade as well as high grade bridge can cross heavy vehicle and harmony between changed size of vehicle and bridge while making laws and code. So we can apply to improve design properly.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.777-784
• /
• 2016

In this paper, the performance design and analysis for an Interior Permanent-Magnet Synchronous Motor (IPMSM) that will be used as a traction motor in the e-4WD system of hybrid SUV(Sports Utility Vehicle) and RV(Recreational Vehicle), are investigated using finite element method. In order to improve the accuracy of design, the tolerances of parts and assemblies as well as the material properties of permanent magnet, stator, rotor and winding etc. are considered under the conditions similar to real driving state of motor. Both no load performance test and maximum load performance test, in which real driving state and cooling condition have been considered, are also implemented via proto sample build to verify the validity of motor's performance design.

• IE interfaces
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2002

Tandem AGV system is obtained by partitioning all workstations into multiple zones assigning a single vehicle to each zone. In this paper, we propose an analytical model to design a tandem AGV system with multi-load AGVs. Using simulation, the performance of the proposed model is shown by comparing a conventional multi-load AGV system.