• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1432-1436
• /
• 2006

Feasibility of optimizing Zwicker's loudness has been shown by using MSC/NASTRAN, SYSNOISE, and a semi-analytical design sensitivity by Wang and Kang. Design sensitivity analysis of Zwicker's loudness is developed by using ANSYS, COMET, and an adjoint variable method in order to reduce computation. A numerical example shows significant reduction of computation time for design sensitivity analysis.

• 품질경영학회지
• /
• 제37권2호
• /
• pp.46-57
• /
• 2009

The traditional approach to economic design of control charts is based on the assumption that a process is monitored using a performance variable. However, various types of automatic test equipments recently introduced as a part of factory automation usually measure surrogate variables instead of performance variables that are costly to measure. In this article we propose a model for economic design of a control chart which uses a surrogate variable that is highly correlated with the performance variable. The optimum values of the design parameters are determined by maximizing the total average income per cycle time. Numerical studies are performed to compare the proposed $\bar{X}$ control charts with the traditional model using the examples in Panagos et al. (1985).

• 한국조경학회지
• /
• 제29권5호
• /
• pp.84-91
• /
• 2001

The purpose of this thesis is to search for appropriate design elements to manage ponds on golf courses. This paper showed that a variable, width, and volume have significant influence on satisfaction(Sig 0.001). This research investgated golf courses in Kyung-ki province. In short, we measured the physical design elements of ponds to bring out major factors which could determine satisfaction of golf courses for golfcourse manager(greenkeeper). The results between satisfaction and physical variable came out as follows; 1, Golfcourse managers(Green keepers) responded to questions that they were satisfied in only 29.9% of the ponds. We found that they considered management very highly. we could evaluated the value of necessity and importance are high, that is importance to manage ponds 2. Some physical design elements(volume, width) increased dependent variable(satisfaction) and others(length, area, circumference, index of shape) decreased dependent variable(satisfaction) 3. Volume has an influence on dependent variable more than depth on index of shape. 4 If the result of \`index of shape\` decreased, the result of \`management satisfaction\` would be high, and when volume is 8500ton∼17000ton, depth is 27m∼3.1m, \`management satisfaction\` would be high. The research findings can be used for planning and designing of golfcourses for designers, and by management for greenkeepers, and will provide pertinent design elements far design of golfcourses. We suggest that the interrelation between ponds and strategic play must be examined in future research.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.827-837
• /
• 2011

The purpose of this study was to observe premium handbag users who are 20 to 30 year old of age, to determine purchase behavior and design preference of handbags by lifestyle and age variable to help market segmentation. A survey instrument was used. A sample was selected by quota sampling method from 20 to 30 aged Korean women, and reliable 538 data were analyzed by SPSS. Cluster type towards lifestyle and age were independent variable. There are two types of lifestyle clusters toward luxury handbags; Strongly favored and weakly favored group toward luxury handbags. Strongly favored group of luxury goods considered more brand, country of origin, and trend, while young people considered more new arrival of design in purchase of products. Preferred design type of hand bag was statistically associated with age variable. 20s consumers preferred shopper bag style and big size of handbags. Leather was preferred by the group of the strongly favored luxury goods. Through this research finding, we hope handbag brand market segmentation will be based on lifestyle and age variable to reflect customer's demand.

• 한국게임학회 논문지
• /
• 제11권2호
• /
• pp.39-44
• /
• 2011

컴퓨터게임은 게임규칙들을 컴퓨터가 자동적으로 처리하기 때문에 게임규칙들이 수학적 함수들로 표현된 게임공식들이 필요하다. 게임공식들은 일반적으로 다변수 함수들이다. 게임공식을 설계하는 것은 관련 게임규칙을 만족하는 다변수 함수를 설계하는 것이기 때문에 복잡하고 어려운 문제이다. 본 논문에서는 게임공식을 체계적으로 설계하는 방법을 제안하였다. 제안하는 방법은 다변수 함수인 게임공식을 피연산자들의 트리구조로 분해하여 이 트리구조의 최하위레벨에는 단일변수 함수들로 구성된다. 그래서 게임공식의 트리구조 분해를 통해 복잡하고 어려운 다변수 함수 설계 문제를 단순하고 쉬운 단일변수 함수 설계 문제로 변경하여 설계하는 방법이다.

• 한국경영과학회지
• /
• 제40권3호
• /
• pp.49-61
• /
• 2015

We study the problem of multiple response optimization (MRO) and focus on the selection of input levels which will produce desirable output quality. We propose an interactive multiple objective optimization approach to the input design. The earlier interactive methods utilized for MRO communicate with the decision maker only using the response variable values, in order to improve the current response values, thereby resulting in the corresponding design solution automatically. In their interaction steps of preference articulation, no account is taken of any active changes in design variable values. On the contrary, our approach permits the decision maker to change the design variable values in its interaction stage, which makes possible the consideration of the preference or economics of the design variable side. Using some typical value functions, we also demonstrate that our method converges reasonably well to the known optimal solutions.

• Structural Engineering and Mechanics
• /
• 제3권4호
• /
• pp.359-372
• /
• 1995

This study presents an efficient method for optimum design of plate and shell structures, when the design variables are continuous or discrete. Both sizing and shape design variables are considered. First the structural responses such as element forces are approximated in terms of some intermediate variables. By substituting these approximate relations into the original design problem, an explicit nonlinear approximate design task with high quality approximation is achieved. This problem with continuous variables, can be solved by means of numerical optimization techniques very efficiently, the results of which are then used for discrete variable optimization. Now, the approximate problem is converted into a sequence of second level approximation problems of separable form and each of which is solved by a dual strategy with discrete design variables. The approach is efficient in terms of the number of required structural analyses, as well as the overall computational cost of optimization. Examples are offered and compared with other methods to demonstrate the features of the proposed method.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.467-473
• /
• 2005

A continuously variable transmission (CVT) with an inner spherical traction drive was conceptually designed for bicycle usage. The range of the overall speed ratio is from 1.0 to 4.5. The rated power and pedal speed are 100 Watts and 6 rad/s, respectively. The peculiar packageability, high-level power efficiency and high torque capacity were considered in the design process. A compact CVT that can be installed within a $244\times125\times160mm^3$ space and is above 0.9 in efficiency for the rated values was numerically designed. The distribution of efficiency according to the input torque and input speed were calculated. Gradeability in the prescribed operation mode was simulated.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.139-144
• /
• 1998

This paper describes the design of a variable rate QPSK demodulator for digital satellite TV system. This true variable-rate demodulator employs a unique architecture to realize an all digital synchronization and detection algorithm. Data-flow based design approach enabled a seamless transition from high level design optimization to physical layout. The demodulator has been integrated with Viterbi decoder, de-interleaver, and Ree-Solomon decoder to make a single chip Digital Video Broadcast (DVB) receiver. The receiver IC has been fabricated with a 0.5mm CMOS TLM process and proved fully functional in a real-world set-up.

• Journal of Biosystems Engineering
• /
• 제31권4호
• /
• pp.305-314
• /
• 2006

Precision farming has been known as an environment friendly farming technology. This study was conducted to develop a variable-rate granule fertilizer applicator as an attempt for introducing the precision farming technologies to rice cultivation in Korea. In this paper, concept design process and manufacturing of prototype variable rate granule applicator was reported. For concept design, some design guide lines were selected. Based on the design guide line and some engineering knowledge, concept design was conducted. The designed prototype granule applicator was mounted at the rear of riding type cultivator for paddy field and had a 10m wide boom structure with pneumatic conveying and application system as well as 1GPS receiver, 1 granule hopper, 12 blow heads, 2 metering devices and 1 controller. The fertilizer applicator had 942 ka of weight, 740m of ground clearance and 1,117mm of center of gravity from the ground. The applicator was designed to be able to $34{\sim}428kg/ha$ of granule at $0.2{\sim}0.8m/s$ of fertilizer working speed.