• Journal of Ocean Engineering and Technology
• /
• v.21 no.2 s.75
• /
• pp.35-41
• /
• 2007

In general, coastal damage is mostly occurred by the action of complex factors, like severe water waves. If the maximum storm surge height combines with high tide, severe water waves will overflow coastal structures. Consequently, it can be the cause of lost lives and severe property damage. In this study, using the numerical model, the storm surge was simulated to examine its fluctuation characteristics at the coast in front of Noksan industrial complex, Korea. Moreover, the shallow water wave is estimated by applying wind field, design water level considering storm surge height for typhoon Maemi to SWAN model. Under the condition of shallow water wave, obtained by the SWAN model, the wave overtopping rate for the dike in front of Noksan industrial complex is calculated a hydraulic model test. Finally, based on the calculated wave-overtopping rate, the inundation regime for Noksan industrial complex was predicted. And, numerically predicted inundation regimes and depths are compared with results in a field survey, and the results agree fairly well. Therefore, the inundation modelthis study is a useful tool for predicting inundation regime, due to the coastal flood of severe water wave.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.679-681
• /
• 2017

Apache Storm은 대용량 데이터 스트림을 처리하기 위한 실시간 분산 병렬 처리 프레임워크이며, 이를 사용해 다수의 프로세스 및 스레드를 동시에 동작시킬 수 있다. 하지만, 이러한 멀티 프로세스 및 스레드 환경을 제공하는 Storm은 많은 네트워크 시스템 호출을 수행하고, 이는 잦은 문맥 전환(context switch), 운영체제로의 버퍼 복사, 운영체제 내의 버퍼 복사 등으로 인해 CPU 과부하 문제를 발생시킬 수 있다. 이러한 문제는 고성능 네트워크 장비인 InfiniBand의 IPoIB(IP over InfiniBand) 통신을 사용할 때, InfiniBand가 지원하는 대역폭(bandwidth) 대비 저용량 데이터의 송수신으로 인해 더 잦은 문맥 전환과 버퍼 복사가 발생하여 CPU 과부하 문제가 더욱 심각해진다. 따라서, 본 논문에서는 InfiniBand의 RDMA(Remote Direct Memory Access)를 Storm에 적용하는 설계안을 제시함으로써 CPU 과부하 문제를 해결한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1361-1375
• /
• 2013

The design flow considering nonstationarity is estimated to determine the design flood related to hydraulic structure quantitatively based on the design process for stream restoration in the Mokgamcheon watershed proposed by Lee et al. (2011). The purpose of this research is to suggest new ways that the design flood was calculated considering nonstationarity at the Mokgamcheon watershed. Storm-unit hydrograph method to calculate design flood and direct frequency analysis were applied and nonstationarity was considered for the frequency analysis through extRemes toolkit developed at NCAR (National Center for Atmospheric Research). Although the method of direct flood frequency analysis due to dealing with flowrates directly has a more reliable than strom-unit hydrograph method, as a result, the method of direct flood frequency analysis underestimated the design flood than strom-unit hydrograph method due to the characteristics of the flow data. Therefore, the flood of storm-unit hydrograph method (100 years frequency) was determined as the design flood in the Mokgamcheon watershed.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.611-614
• /
• 2009

Understanding the severity of the typhoon-induced storm-surge helps in planning reaction and in preventing further disaster. Natural disasters due to the storm-surge are predictable from accurate observations and forecasts from numerical simulations. What we can do is to make intelligent effort to minimize the loss due to the disaster to the most extent with the technology of early warning, forecast and prevention activity. In this paper, we propose the design of GIS-based Web Service System to visualize the time-varying storm-surge's height and wind field data effectively with 3 different kinds of resolution for predict and prevent storm-surge disasters. This system is one of the efforts to provide the storm-surge forecast service to general public and share two-way more helpful information to coastal resident through the Internet.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.5
• /
• pp.107-113
• /
• 2009

The purpose of this study is to estimate the design flood runoff for ungaged forest watershed to reduce the flood damage in national park. Daewonsa watershed in Jirisan National Park was selected as study watershed, of which characteristic factors were obtained from GIS data. Flood runoff was simulated using SCS unit hydrograph module in HEC-HMS model. SCS Curve Number (CN) was calculated from forest type area weighted average method. Huff's time distribution of second-quartile storm of the Sancheong weather station, which is nearest from study watershed, was used for design flood runoff estimation. Critical storm duration for the study watershed was 3 hrs. Based on the critical duration, the peak runoff for each sub-watershed were simulated. It is recommended to monitor the long-term flow data for major stream stations in National Park for a better reliable peak runoff simulation results.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.695-708
• /
• 1998

Recently, it seems increasing trends that the design floods on the middle and small scale of urban regions and natural basins are evaluated with introducing to the concept of the critical storm duration. However the study of the critical storm duration is not sufficient and especially on the natural basins, it rarely performed. therefore in this study, estimated the critical storm duration and peak discharge according to the rainfall distribution type, the position of peak rainfall intensity, and the frequency on the natural basins were evaluated using Clark model and the influence of each factors on the design floods was analyzed with sensitivity analysis on the parameters of the model.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.436-442
• /
• 2022

Hurricanes and tornadoes are the most destructive natural disasters in some central and southern states. Thus, storm shelters, which can provide emergency protections for low-rise building residents, are becoming popular nowadays. Both FEMA and ICC have published a series of manuals on storm shelter design. However, the authors found that the materials for related products in the market are heavyweight and hard to deliver and install; renovations are necessary. The authors' previous studies found that lightweight and high-performance composite materials can withstand extreme wind pressure, but some building codes are designated in wind-borne debris areas. In these areas, wind debris can reach greater than 100 mph speed. In addition, the impact damage on the composite materials is an increasing safety issue in many engineering fields; some can cause catastrophic results. Therefore, studying composite structures subjected to wind debris impact is essential. The finite element models are set up using the software Abaqus 2.0 to conduct the simulations to observe the impact resistance behavior of the carbon fiber composite sandwich panels. The selected wood debris models meet the FEMA requirements. The outcome of this study is then employed in future lab tests and compared with other material models.

• Journal of Korea Water Resources Association
• /
• v.43 no.2
• /
• pp.167-185
• /
• 2010

One of the most difficult problems in estimating design floods is how to determine design storms. More specifically, the design storm problems turn into how to determine temporal and spatial distribution of the storm. In this study, Thiessen-Weighted BlocKing-type(TWBK) moving storms are suggested to resolve the design storm problems and their applicability is investigated. These moving storms are applied for 100-year 48-hour design flood estimation in Han river basin using a physics-based distributed rainfall-runoff model. Simulated floods from moving storms are compared with frequency-based ones estimated from observed floods.

• Water for future
• /
• v.14 no.4
• /
• pp.13-18
• /
• 1981

The rainfall pattern analysis on time distribution characteristics of rainfall rates in important in determination of design flow for hydraulic structures, particularly in urban area drainage network system design. The historical data from about 400 storm samples during 31 years in Seoul have been used to investigate the time distribution of 5-minute rainfall in the warm season. Time distribution relations have been deveolped for heavy stroms over 20mm in total rainfall and represented by relation percentage of total storm rainfall to percentage of total storm time and grouping the data according to the quartile in which rainfall was heaviest. And also time distribution presented in probability terms to provide quantitative information on inter-strom variability. The resulted time distribution relations are applicable to construction of rainfall hyetograph of design storm for determination of design flow hydrograph and identification of rainfall pattern at given watershed area. They can be used in conjuction with informations on spatstorm models for hydrologic applications. It was found that second-quartile storms occurred most frequently and fourth-quartile storms most infrequently. The time distribution characteristics resulted in this study have been presented in graphic forms such as time distribution curves with probability in cumulative percent of storm-time and precipitation, and selected histograms for first, second, third, and fourth quartile stroms.

• Water for future
• /
• v.27 no.4
• /
• pp.85-94
• /
• 1994

A Sensitivity analysis on the model parameters involved in the Clark watershed routing method is made to demonstrate the effect of each parameter on the magnitude of 50-year design flood for small urban streams. As for the rainfall parameter the time distribution pattern of design storm was selected. For short duration storms Huff, Yen & Chow and Japanese Central type distributions were selected and the Mononobe distribution of 24-hour design storm was also selected and tested for Clark method application. The effect of SCS runoff curve number for effective rainfall and the methods of subbasin division for time-area curve were also tested. The routing parameter, i.e. the storage constant(K), was found to be the dominating parameter once design storm is selected. A multiple regression formula for K correlated with the drainage area and main channel slope of the basin is proposed for the use in urban stream practice for the determination of design flood by Clark method.