• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2002년도 한국우주과학회보 제11권1호
• /
• pp.36.1-36
• /
• 2002

• 한국화재소방학회논문지
• /
• 제31권1호
• /
• pp.26-35
• /
• 2017

미국 노스리지 지진(1994)과 일본 고베지진(1995) 발생 이후 다양한 구조물 및 건축물을 설계 할 때 성능기반 내진설계 개념을 적용하고 있다. 최근 국내 소방시설물에 대해서도 내진설계기준이 제정되어 내진설계 규정에 따라 적합하게 설계되어야 한다. 성능기반 설계가 도입되면서 구조물 중요도에 따라 기능수행, 즉시복구, 인명보호, 붕괴방지 등 각각의 성능에 적합한 연발생빈도의 등재해도 스펙트럼이 요구되고 있다. 확률론적 방법을 적용하여 국내 주요 5개 도시에 대해 등재해도 스펙트럼(uniform hazard spectrum)을 분석하였다. 지진 및 지체구조 관련된 전문가 패널은 10인이며 전문가 패널이 제시한 다수의 지진지체구조구 모델 및 다양한 지진동 감쇠식을 적용하였다. 분석대상 진동수는 (0.5, 1.0, 2.0, 5.0, 10.0) Hz이고 또한 PGA(최대지반가속도) 결과를 이용하여 500년, 1,000년 및 2,500년 등 3개 주요 성능기준에 해당하는 재현주기에 대해 등재해도 스펙트럼을 분석하였다. 민감도 분석에 의하면 지진지체구조 구 모델 변수보다 지반진동 감쇠식 변수가 지진재해도에 보다 큰 영향을 주는 것으로 분석되었다. 일반적으로 등재해도 스펙트럼은 10 Hz에서 최대 지진재해도를 보여 주었고, 기존 연구 및 관련 기술기준에 제시된 등재해도 스펙트럼의 수준 및 모양 특성과 대단히 유사하였다.

• Earthquakes and Structures
• /
• 제15권1호
• /
• pp.1-8
• /
• 2018

A new site classification system and site coefficients based on local site conditions in Korea were developed and implemented as a part of minimum design load requirements for general seismic design. The new site classification system adopted bedrock depth and average shear wave velocity of soil above the bedrock as parameters for site classification. These code provisions were passed through a public hearing process before it was enacted. The public hearing process recommended to modify the naming of site classes and adjust the amplification factors so that the level of short-period amplification is suitable for economical seismic design. In this paper, the new code provisions were assessed using dynamic centrifuge tests and by comparing the design response spectra (DRS) with records from 2016 Gyeongju earthquake, the largest earthquake in history of instrumental seismic observation in Korea. The dynamic centrifuge tests were performed to simulate the representative Korean site conditions, such as shallow depth to bedrock and short-period amplification characteristics, and the results corroborated with the new DRS. The Gyeongju earthquake records also showed good agreement with the DRS. In summary, the new code provisions are reliable for representing the site amplification characteristic of shallow bedrock condition in Korea.

• Structural Engineering and Mechanics
• /
• 제10권4호
• /
• pp.405-426
• /
• 2000

Two approximate methods based on mechanism analysis suitable for seismic assessment/design of structural concrete are reviewed. The methods involve use of equal energy concept or equal displacement concept along with appropriate patterns of inelastic deformations to relate structure's maximum lateral displacement to member and plastic deformations. One of these methods (Clough's method), defined here as a ductility-based approach, is examined in detail and a modification for its improvement is suggested. The modification is based on estimation of maximum inelastic displacement using inelastic design response spectra (IDRS) as an alternative to using equal energy concept. The IDRS for demand displacement ductilities are developed for a single degree of freedom model subjected to several accelerograms as functions of response modification factor (R), damping ratios, and strain hardening. The suggested revised methodology involves estimation of R as the ratio of elastic strength demand to code level demand, and determination of design base shear using $R_{design}{\leq}R$ and maximum displacement, determination of plastic displacement using IDRS and subsequent local plastic deformations. The methodology is demonstrated for the case of a 10-story precast wall panel building.

• 터널과지하공간
• /
• 제21권6호
• /
• pp.471-479
• /
• 2011

최근 한반도 및 주변해역에서 발생한 규모 4.8 이상의 5개 중규모 지진으로부터 관측된 속도 지반운동 파형을 이용하여 수평 응답스펙트럼을 분석하고 결과를 우선 가속도 지반운동을 이용하여 얻어진 수평 응답스펙트럼, 국내 원자력 관련 구조물의 내진설계 기준, 마지막으로 국내 일반 구조물 및 건축물 내진설계기준과 각각 비교하였다. 연구에 이용된 지반운동은 수평성분 102개(NS 및 EW 성분 포함)이며 고유진동수에 따른 응답을 구하고 각각의 최대 지반 속도 값을 이용하여 정규화 분석을 수행하였다. 첫째, 가속도 응답스펙트럼과 비교한 결과 속도 응답스펙트럼 값은 특히 중간주기에서 높은 응답을 보여 주었고 이에 비해 가속도 응답스펙트럼은 특히 단주기 즉 높은 고유진동수 영역에서 높은 응답을 보여 주었다. 둘째, 국내 원자력시설물의 내진기준으로 이용되고 있는 Reg. Guide 1.60과 비교한 결과 속도 응답스펙트럼 값은 약 6-7Hz를 시작점으로 보다 낮은 장주기 영역에서 기준값을 초과하는 현상을 보여 주었다. 셋째, 500년 재래주기에 해당하는 국내 일반 구조물 및 건축물 내진설계기준인 표준 설계응답스펙트럼을 SC, SD 및 SE지반 조건과 같은 3개 지반조건과 동시에 비교한 결과 차례로 약 1.5초, 2초 및 3초에서 시작하여 보다 장주기 영역에서 국내 일반 구조물 표준 설계 응답스펙트럼값을 초과하였다. 동일한 부지에서 일반적으로 가속도 응답스펙트럼은 단주기에서 가장 큰 값을 나타내며, 속도 응답 스펙트럼은 중간주기에서 가장 크며, 마지막으로 변위 응답스펙트럼은 장주기에서 가장 큰 값을 가진다는 국외 연구결과가 국내 지반운동을 이용한 결과에서 역시 적용가능하다는 점을 확인시켜 주었다. 최근 국내에서도 건축물의 초고층화 등으로 구조물의 디자인이 기존의 단주기에 비해 중간주기 및 장주기 영역이 상대적으로 강조되고 있어 이러한 중간주기영역에서 수평 응답스펙트럼의 정보는 향후 대단히 중요하다고 할 수 있다.

• 한국지진공학회논문집
• /
• 제11권4호
• /
• pp.65-77
• /
• 2007

Site response analyses were performed based on equivalent linear technique using shear wave velocity profiles of 162 sites collected around the Korean peninsula. The site characteristics, particularly the shear wave velocities and the depth to the bedrock, are compared to those in the western United States. The results show that the site-response coefficients based on the mean shear velocity of the top 30m ($V_{S30}$) suggested in the current code underestimates the motion in short-period ranges and overestimates the motion in mid-period ranges. The current Korean code based on UBC is required to be modified considering site characteristics in Korea for the reliable estimation of site amplification. From the results of numerical estimations, new regression curves were derived between site coefficients ($F_{a}\;and\;F_{v}$) and the fundamental site periods, and site coefficients were grouped based on site periods with reasonable standard deviations compared to site classification based on $V_{S30}$. Finally, new site classification system and modification of design response spectra are recommended considering geotechnical characteristics in Korea.

• Earthquakes and Structures
• /
• 제19권2호
• /
• pp.145-156
• /
• 2020

The 24 January 2020 (Mw=6.8) earthquake with epicentre in Elazığ (Sivrice) on the East Anatolian Fault Zone caused loss of life and property. The information was given about the seismotectonic setting and regional seismicity along this fault zone and aftershock activity and ground motion data of this earthquake. Earthquake parameters were obtained for five different earthquake stations which were closer to the epicentre. Horizontal and vertical design spectra were obtained for the geographic locations for each earthquake station. The obtained spectra for the earthquake epicentre were compared with selected appropriate attenuation relationships. The damages after earthquake were evaluated via geotechnical and structural aspects. This study also aims to investigate the cause-effect relationships between structural damage in reinforced-concrete and masonry structures, respectively. The lack of engineering services was effective on the amount of damage in masonry structures. Insufficient reinforcement and concrete strength, dimensions and inadequate detailing increased the amount of damage in reinforced-concrete structures. Importance should be given to negative parameters that may weaken the defence mechanisms of structures for earthquake-resistant structural design.

• 터널과지하공간
• /
• 제15권5호
• /
• pp.338-343
• /
• 2005

본 연구는 가행중인 석회석광산에서 측정된 발파진동을 이용하여 응답스펙트럼을 분석하였으며 국내 원자력 관련 구조물의 내진설계 기준과 비교하였다. 연구에 이용된 발파진동 개수는 수평성분 및 수직성분 각각 43개이다. 국내 원자력시설물의 내진기준인 Reg. Guide 1.60과 비교한 결과 약 20Hz를 중심으로 고주파 영역에서 발파진동에 의한 MPOSD 스펙트럼 및 Mean 스펙트럼 값이 Reg. Guide 1.60보다 값이 높게 나타나고, 약 20Hz를 중심으로 저주파수 영역에서는 값이 현저하게 낮게 나타나고 있다. 구조물 피해를 최소화를 위한 시험발파를 통한 최대 지반진동값을 적용하는 것도 중요하지만 각종 구조물에 대한 영향을 복합적으로 해석하기 위해 응답 스펙트럼 특성을 부가하여 적용할 필요가 있다.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.11-19
• /
• 2014

PURPOSES : The purpose of this article is to investigate the predicted life of jointed concrete pavement (JCP) with two variables effecting on axle load spectra (ALS). The first variable is different data acquisition methods whether using high-speed weigh-in-motion (HS-WIM) or not and the other one is spectra distribution due to overweight enforcement on main-lane of expressway using HS-WIM. METHODS : Three sets of ALS had been collected i) ALS provided by Korea Pavement Research Program (KPRP), which had been obtained without using HS-WIM ii) ALS collected by HS-WIM before the enforcement at Kimcheon and Seonsan site iii) ALS collected after the enforcement at the same sites. And all ALS had been classified into twelve vehicle classes and four axle types to compare each other. Among the vehicle classes, class 6, 7, 10 and 12 were selected as the major target for comparing each ALS because these were considered as the primary trucks with a high rate of overweight loading. In order to analyze the performance of JCP based on pavement life, fatigue crack and International Roughness Index (IRI) were predicted using road pavement design program developed by KPRP and each ALS with same annual average daily traffic (AADT) was applied to design slab thickness. RESULTS : Comparison ALS of KPRP with those of HS-WIM shows that the ALS of KPRP has a low percentage of heavy spectra such as 6~9 tonnes for single axle, 18~21 tonnes for tandem axle and 27~30 tonnes for tridem axle than other two ALS of HS-WIM in most vehicle classes and axle types. It means that ALS of KPRP was underestimated. And after the enforcement, percentage of heavy spectra close to 10 tonnes per an axle are lowered than before the enforcement by the effect of overweight enforcement because the spectra are related to overweight regulation. Prediction results of pavement life for each ALS present that the ALS of HS-WIM collected before the enforcement makes the pavement life short more than others. On the other hand, the ALS of KPRP causes the longest life under same thickness of slab. Thus, it is possible that actual performance life of JCP under the traffic like ALS of HS-WIM could be short than predicted life if the pavement was designed based on ALS provided by KPRP. CONCLUSIONS : It is necessary to choose more reliable and practical ALS when designing JCP because ALS can be fairly affected by acquisition methods. In addition, it is important to extend performance life of the pavement in service by controlling traffic load such as overweight enforcement.

• 한국지진공학회논문집
• /
• 제24권6호
• /
• pp.267-275
• /
• 2020

In the event of an earthquake, non-structural components require seismic performance to ensure evacuation routes and to protect lives from falling non-structural components. Accordingly, the seismic design code proposes horizontal force for the design and evaluation of non-structural components. Ground motion observed on each floor is affected by a building's eigen vibration mode. Therefore, the earthquake damage of non-structural components is determined by the characteristics of the non-structural component system and the vibration characteristics of the building. Floor response spectra in the seismic design code are estimated through time history analysis using seismic waves. However, it is difficult to use floor response spectra as a design criterion because of user-specific uncertainties of time history analysis. In addition, considering the response characteristics of high-rise buildings to long-period ground motions, the safety factor of the proposed horizontal force may be low. Therefore, this study carried out the horizontal force review proposed in the seismic design code through dynamic analysis and evaluated the floor response of seismic waves considering buildings and predominant periods of seismic waves.