• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.137-141
• /
• 1986

This paper presents optimal recursive digital filter design to meet simultaneous specifications of magnitude and linear phase characteristics. As is well known, the overshoot in the vicinity of discontinuity is hight. The technique using linear programming (the dual programming) is choosing more specification points in the vicinity of band limit frequency. The resulting filter can shown improved response and numerical accuracy with reduced nonuniform specification points in frequency domain.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.183-185
• /
• 1998

In this paper, a magnetic circuit of plastic magnet roller for laser printer is presented. The magnetization direction of plastic magnet is decided by the flux distribution of injection mold during the manufacturing process. The injection mold is designed and analysed to fit the design specification. The experiment showed that the flux distribution of a magnet is good agreement of the given specification.

• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.103-107
• /
• 2003

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.221-224
• /
• 2005

The purpose of this study is to introduce design practice for transverse reinforcement in piles where the top of the pile is free-standing above the ground in accordance with AASHTO LRFD Design Specification. Based on the relevant requirements, the amount and spacing of transverse spiral reinforcement is given for the two different pile types, namely piles with pile cap and pile bents. In addition, a recommended design procedure is introduced depending on the predicted behaviour of the piles from the analysis.

• 대한산업공학회지
• /
• 제14권2호
• /
• pp.71-80
• /
• 1988

The primary purpose of this study is to develop an automation tool capable of converting the specification of structured analysis into that of structured design. Structured Analysis and Structured Design Language (SASDL) is a computer-aided description language based on ERA model and particulariged by ISLDM/SEM. The automation tool utilizes the specifications of data flow diagram described in SASDL to produce their corresponding SASDL specification of structure chart. The main idea behind the automatic conversion process is to categorize the bubbles in data flow diagram and to determine the positions of the bubbles in structure chart according to their categories and the relative locations in data flow diagram. To make the problem into manageable size, the whole system is broken down into separate parts called activity units. A great deal of manual jobs, such as checking processes leveling, checking data derivation of processes, deriving structure chart from data flow diagram, checking any inconsistency between data flow diagram and structure chart and so forth, can be automated by using SASDL and conversion tool. The specification of structure chart derived by conversion tool may be used in an initial step of design to be refined by SASDL users.

• Steel and Composite Structures
• /
• 제45권4호
• /
• pp.513-533
• /
• 2022

This study presents similarities and differences between Turkish Building Code for Steel Structures, which are TS 648 and SDCCSS (Specification for Design, Calculation and Construction of Steel Structures) in terms of the design of the members. Hot-rolled I-shaped steel sections for symmetrical and U-shaped steel sections (i.e., channels) for monosymmetric sections were elaborated in detail. The design strength of tension members under tensile load, compression members under axial load and flexural members under flexure and shear were examined separately. Connection details for tension members, slenderness for compression members and distance between lateral supports for flexural members were considered as prime variables. Analysis results revealed the design strength of the tension members where at least one of the cross-sectional parts is not connected to the connection plates, I-shaped compression members where a slenderness ratio is below 39 (𝛌<39), U-shaped compression members and flexural members where L_b is between L_p and L_r (L_pb≤L_r) designed based on TS 648 are greater than those designed based on SDCCSS 2018. Strength differences between the specification can reach 79% for tensile members, 13% for compression members and 9% for flexural members.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 가을 학술발표논문집 Vol.31 No.2 (2)
• /
• pp.337-339
• /
• 2004

항공 및 국방 산업 둥에서는 고안전성 임베디드 시스템의 신뢰성과 안전성을 보장하기 위해 임베디드 시스템의 설계 및 구현에 정형기법을 적용하고 있다. 본 논문은 그러한 정형기법을 적용하여 임베디드 시스템 소프트웨어의 요구사항 명세(Software Requirements Specification : SRS)와 요구명세를 바탕으로 실제 구현을 위한 설계명세(Software Design Specification : SDS)를 정형기법을 이용하여 명세하였다. 본 논문은 정형 명세 언어로 작성된 요구명세와 설계명세 간의 부합성 검사를 하고 더 나아가 임베디드 시스템 요구 분석에서 더 정확하게 소프트웨어를 구현할 수 있는 방법을 제시하고자 한다.

• 산업기술연구
• /
• 제21권A호
• /
• pp.199-205
• /
• 2001

e-book is digital contents using IT technology instead of paper. It is carried in Internet and displayed wish Viewer of PC, PDA or terminal. The Open eBook specification is to provide a specification for representing the content of electronic books to these viewers. The specification is based on HTML and XML, the same core languages that define the World Wide Web, and is designed to allow publishers and authors to deliver their material in a single format. In this paper, we design and implement the viewer that can support OEB(Open eBook) standard. Viewer is composed parser part and display part. In audition, we add some functions - the book shelf, the bookmark and the dictionary - for convenience of readers.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.33-34
• /
• 2017

The purpose of this case study is to reduce the flaw and reconstruction occur at the level of construction by determining the propriety of estimate and error on a drawing and specification at working design level through case studies of BIM application at the level of design review. As a preliminary to apply BIM technology, it is needed to review the drawing, and then it is required to define BIM range by selecting the section in which construction error occurs frequently except for the type of part that is constructed repeatedly. At the execution level, the drawing is reviewed vertically, horizontally and spatially by proceeding structure and finish modeling on the defined BIM range, and also the propriety of estimate and error on the drawing and specification are examined. We aim to raise the completion rate, improve quality of construction, reduce the cost for construction and shorten period of construction by preparing for the error on the drawing and specification in advance through this review procedures.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.410-413
• /
• 2000

This paper suggests a methodology in which control signals for high-level synthesis are generated from SDL specification. SDL is based on EFSM(Extended Finite State Machine) model. Data path and control part are partitioned into representing data operations in the from of scheduled data flow graph and process behavior of an SDL code in forms of an abstract FSM. Resource allocation is performed based on the suggested architecture model and local control signals to drive allocated functional blocks are incorporated into an abstract FSM extracted from an SDL process specification. Data path and global controller acquired through suggested methodology are combined into structural VHDL representation and correctness of behavior for final circuit is verified through waveform simulation.