• Journal of the Korean Society for Library and Information Science
• /
• v.7
• /
• pp.89-195
• /
• 1980

The advanced developing countries including Korea are assumed to have reached a developmental stage which necessitates them to formulate and implement a plan for a national information network. Most of the governments in the advanced developing countries are well aware of the necessity for such a plan and some of them have actually commenced their studies on the feasibility of a national network of their own hoping to achieve maximum utility of their limited information resources. Two urgent problems facing planners in the design of a national information network are identified. One is lack of an optimum organisational model to enable them to meet their own situations, and the other is lack of a guideline to help designers evaluate the alternative structures and models when they are available. In resolving these two problems, network planners in the advanced developing countries would benefit from the achievement of the objectives of the present study. The major objective is to elicit and describe common information needs, desires and value of the people using information, and other common factors which are responsible for the present information services in the advanced developing countries and which have implications for the basic structure of the national information network. The value of this study is to aid administrators in Korea and those in the other advanced developing countries who are responsible for making national policies and who are now beginning to recognise the need for information services with the planning of economic and social development so as to enable all the groups in the community to have access to the information which are essential for decision making, research work, studies and even for recreational reading. This recognition will hopefully give them a rational basis for formulating right policies on information services. The methodology utlised for collecting the required data in this study falls under the category of observation and largely consists of the two techniques: literature review and postal questionnaire. Background information on the individual advanced developing: countries was gathered from monographic and periodical literature. and country reports presented at the various international conferences were analysed for other relevant data. For most of the data needed for the present study, a questionnaire on 'Library and Information Services as They Are Available in the Selected Countries' was formulated. This questionnaire was designed to be completed without help, by an expert who was well informed of the library and information services in his or her country. The questionnaire was intended to look in details at what information services in the advanced developing countries were doing-whom they were serving, in what way, and how well and establish to what extent they were meeting the nation's information requirements. It was also intended to ascertain the respondents' ideas on possible future developments in information provision in their countries, that is, in the advanced devanced developing countries. The questionnaire was posted to a total of 63 natinal librarians, directors of national information centres and those of other major libraries or information centres in 21 selected countries. Complete usable responses were received from 34 persons in 14 countries. In order to identify common characteristics of the information needs and desires in the advanced developing countries and the present situation of the information services to meet them, and the requirements and constraints peculiar to those countries which bought to be considered in the design of a national information network for advanced developing countries, an individual report on the current status of information activities for each of the fourteen countries chosen for this study, was presented. The procedure used was to arrange the data acquired in the questionnaire responses and other sources, in the form of fifteen country reports to be summarised by cross-section characteristics later.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.1-13
• /
• 2018

Landscape Architecture is a minority manpower field that requires wide knowledge and experience. Therefore, the service market is narrower than other fields, and education service for practitioners is lacking. The purpose of this study is to propose e-learning content development methodology that can provide customized landscaping practical education according to the level of education and increase the economic efficiency of the development process. First, in theoretical review, the ADDIE model was modified to select the curriculum development model that pursues efficiency and introduced the concept of reusing learning objects in the SCORM-based model. In particular, to overcome the problems presented in the precious studies, the analysis and design stages have been strengthened and faculty designers with integrated knowledge of Landscape Architecture and ICT have led the overall phase. The actual development process is based on a step by step procedure--analysis of landscaping practitioners needs and environments, etc., teaching and learning procedures and the design of activities considering contents reuse, the first development such as actual shooting and editing, and the second development reusing the first development content--and was done in the order of evaluation and revision of professionalism and satisfaction. As a result of the study, the space-based courses composed of modular learning objects were first developed as 216 courses in 8 subjects, as 208 courses in 3 subjects in total, in which the modularized learning object are crossed and combined in units and difficulty-based courses were second developed in 216 courses with 3 subjects in total. As a result of the evaluation the satisfaction assessment of the overall satisfaction was 4.20 and the average value of the eight measures was 3.97, both being close to 4.0. For the professional assessment, the scores of 8 subjects were very high at 84.8 to 96.4 points. in context, the scores of 5 subjects were equal to from 89.9 to 96.4 points. In conclusion, as the study was conducted based on a clear understanding of the digital characteristics of e-learning contents and general characteristic of the landscaping industry, it was possible to develop a curriculum by developing a course composed of modular learning objects and reusing learning objects by unit. In particular, it has been proven to be effective in conveying professional knowledge and experiences via general procedures and provided an opportunity to overcome some analog problems that may occur in offline education. In the future, further studies need to be done by expanding the content and by focusing on segmented subjects.

• 대한공업교육학회지
• /
• v.43 no.1
• /
• pp.158-176
• /
• 2018

The purpose of this study is to analyze the satisfaction of the manufacturing process and the satisfaction of manufacturing lesson in the lesson of model product manufacturing based on IoT(Internet of Things) for pre-service technology teachers. and we also analyzed 'smart farm' model production manufacturing among various products. The survey questionnaires with 8 questions to investigate satisfaction level of model manufacturing process, difficulties in manufacturing, and the satisfaction level of manufacturing lesson were collected from the 15 pre-service technology teachers and analyzed by using SPSS program. and The results of this study were as follows: First, the lesson satisfaction average level of pre-service technology teachers was high(M=4.22) in model product manufacturing process for the 'smart farm' model making based on the IoT. Second, the average satisfaction level of 'patent search and prior art search report writing education' was as high as 4.07. Therefore, the application of 'prior art search report writing education' showed that it helped to make the product. Third, the best high satisfaction level in the model production manufacturing procedure was 'education of inventive thinking method'(M=4.40). Therefore, the pre-service technology teachers showed that the 'education of inventive thinking methods' was very helpful from the idea design to the optimal selection of idea. The next order of satisfaction level was high(M=4.33) in 'design education and counseling' and 'guidance through selection of professor who guide the production manufacturing in addition to professors who are in charge of lesson'. Because they were helpful in solving the lack of knowledge of pre-service technology teachers. Fourth, satisfaction level with 'the presentation of model making results and exhibitions', 'presentations and participations of external event' was high (M = 4.13). Although the results of interviews with pre-service technology teachers showed that they suffered from lack of knowledge in various technologies, but it was an opportunity to learn things and felt a sense of accomplishment.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.65-78
• /
• 2011

Construction business, which is complex and long-term business, requires accurate estimation and verification in construction costs and payment procedure from project planning to the completion of construction phase. And more importantly, it is necessary to investigate and determine the risk factors related to construction costs during the entire process including design planning, construction drawings, and quantity calculating. But, currently, it is not seem to be adequate to cope with the risk and increased construction costs against the operational budget in terms of actual costs when screening and estimating the bidding cost of public apartment. Therefore, this study selected and analyzed 40 sites' report of construction completion account from 2004 to 2010 focused on the adequacy on the modification of contract and design planning and on the complication of the budget in the beginning of the project. This study deducted various risk causes and results by analyzing actual costs according to year, architectural area, region, construction cost and sale/lease classification. We could find out construction risk according to annual variation of government policy and economy, and also deducted risk items by construction characteristic according to region and architectural area. Study result, we first found out the problems of lowest price award system according to the construction costs. The weight of the cost increase risk was analyzed that subcontract and material costs are very high. Roof and tile work were analyzed highly in subcontract cost risk and reinforcing bar and cement were analyzed highly in material cost risk, among direct construction cost. Finally, this study results could be used in comparing the categories of the construction costs made by specific construction process, belonging to the construction costs, with the operational budget made in the beginning of the project that can enable to grasp unpredictable risks over the construction costs and making quantitative analysis for it through analyzing the range of fluctuation and variations led by the fluctuations in the actual construction costs.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.3
• /
• pp.111-133
• /
• 2020

The purpose of this study is to analyze the contents of global citizenship education in the 2015 revision of Home Economics textbook and examine the relevance of global citizenship education in the subject of Home Economics. To this end, the contents of global citizenship education included in the 2015 revision of middle school Home Economics textbook were extracted and analyzed from the viewpoint of the UNESCO Topics and Learning Objectives (TLO), according to the procedure of the concurrent triangulation design. When the frequencies of inclusion of the 9 topics of TLOs were counted, about 54.6% of global citizenship education(GCED) content covered in the 2015 revision of Home Economics textbooks in total was related to the socio-emotional aspects. In particular, TLO 4 (Different levels of identity) showed the highest ratio, followed by TLO 5(Different communities people belong to and how these are connected) and TLO 1 (Local, national and global systems and structures). As a result of categorizing global citizenship education learning topics extracted from Home Economics textbooks of middle school by Home Economics sub-topic area, the child and family(94) area showed the greatest relevance to all learning topics. Food and nutrition(13), clothing(13), housing(15), and consumption (14) showed similar distributions of learning subjects. Child and family area is related to global citizenship education in the topics of adolescent development and its characteristics, family relations, sexual and domestic violences prevention, change in family structures and healthy families, aging society and work-family balance, and life planning and career exploration. The food and nutrition area is related to global citizenship education in the topics of nutrition and eating behavior, and adolescents' food selection and safe cooking. The topic of clothing management and recycling of clothing area, housing culture, residential space utilization, and residential life and safety of housing area, consumer life in adolescence of consumption area were related to the learning subject of global citizenship education. As such, high relations between GCED learning topics and Home Economics learning content elements were found. It is expected that the data of this study will be used as basic data for program development, class improvement, and textbook development with global citizenship education as a content element in Home Economics education.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.7 no.1
• /
• pp.861-876
• /
• 1965

During my stay in the Netherlands, I have studied the following, primarily in relation to the Mokpo Yong-san project which had been studied by the NEDECO for a feasibility report. 1. Unit hydrograph at Naju There are many ways to make unit hydrograph, but I want explain here to make unit hydrograph from the- actual run of curve at Naju. A discharge curve made from one rain storm depends on rainfall intensity per houre After finriing hydrograph every two hours, we will get two-hour unit hydrograph to devide each ordinate of the two-hour hydrograph by the rainfall intensity. I have used one storm from June 24 to June 26, 1963, recording a rainfall intensity of average 9. 4 mm per hour for 12 hours. If several rain gage stations had already been established in the catchment area. above Naju prior to this storm, I could have gathered accurate data on rainfall intensity throughout the catchment area. As it was, I used I the automatic rain gage record of the Mokpo I moteorological station to determine the rainfall lntensity. In order. to develop the unit ~Ydrograph at Naju, I subtracted the basic flow from the total runoff flow. I also tried to keed the difference between the calculated discharge amount and the measured discharge less than 1O~ The discharge period. of an unit graph depends on the length of the catchment area. 2. Determination of sluice dimension Acoording to principles of design presently used in our country, a one-day storm with a frequency of 20 years must be discharged in 8 hours. These design criteria are not adequate, and several dams have washed out in the past years. The design of the spillway and sluice dimensions must be based on the maximun peak discharge flowing into the reservoir to avoid crop and structure damages. The total flow into the reservoir is the summation of flow described by the Mokpo hydrograph, the basic flow from all the catchment areas and the rainfall on the reservoir area. To calculate the amount of water discharged through the sluiceCper half hour), the average head during that interval must be known. This can be calculated from the known water level outside the sluiceCdetermined by the tide) and from an estimated water level inside the reservoir at the end of each time interval. The total amount of water discharged through the sluice can be calculated from this average head, the time interval and the cross-sectional area of' the sluice. From the inflow into the .reservoir and the outflow through the sluice gates I calculated the change in the volume of water stored in the reservoir at half-hour intervals. From the stored volume of water and the known storage capacity of the reservoir, I was able to calculate the water level in the reservoir. The Calculated water level in the reservoir must be the same as the estimated water level. Mean stand tide will be adequate to use for determining the sluice dimension because spring tide is worse case and neap tide is best condition for the I result of the calculatio 3. Tidal computation for determination of the closure curve. During the construction of a dam, whether by building up of a succession of horizontael layers or by building in from both sides, the velocity of the water flowinii through the closing gapwill increase, because of the gradual decrease in the cross sectional area of the gap. 1 calculated the . velocities in the closing gap during flood and ebb for the first mentioned method of construction until the cross-sectional area has been reduced to about 25% of the original area, the change in tidal movement within the reservoir being negligible. Up to that point, the increase of the velocity is more or less hyperbolic. During the closing of the last 25 % of the gap, less water can flow out of the reservoir. This causes a rise of the mean water level of the reservoir. The difference in hydraulic head is then no longer negligible and must be taken into account. When, during the course of construction. the submerged weir become a free weir the critical flow occurs. The critical flow is that point, during either ebb or flood, at which the velocity reaches a maximum. When the dam is raised further. the velocity decreases because of the decrease\ulcorner in the height of the water above the weir. The calculation of the currents and velocities for a stage in the closure of the final gap is done in the following manner; Using an average tide with a neglible daily quantity, I estimated the water level on the pustream side of. the dam (inner water level). I determined the current through the gap for each hour by multiplying the storage area by the increment of the rise in water level. The velocity at a given moment can be determined from the calcalated current in m3/sec, and the cross-sectional area at that moment. At the same time from the difference between inner water level and tidal level (outer water level) the velocity can be calculated with the formula $h= \frac{V^2}{2g}$ and must be equal to the velocity detertnined from the current. If there is a difference in velocity, a new estimate of the inner water level must be made and entire procedure should be repeated. When the higher water level is equal to or more than 2/3 times the difference between the lower water level and the crest of the dam, we speak of a "free weir." The flow over the weir is then dependent upon the higher water level and not on the difference between high and low water levels. When the weir is "submerged", that is, the higher water level is less than 2/3 times the difference between the lower water and the crest of the dam, the difference between the high and low levels being decisive. The free weir normally occurs first during ebb, and is due to. the fact that mean level in the estuary is higher than the mean level of . the tide in building dams with barges the maximum velocity in the closing gap may not be more than 3m/sec. As the maximum velocities are higher than this limit we must use other construction methods in closing the gap. This can be done by dump-cars from each side or by using a cable way.e or by using a cable way.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.157-175
• /
• 2013

Since Korean government announced 'Smartwork promotion strategy' in 2010, Korean firms and government organizations have started to adopt smartwork. However, the smartwork has been implemented only in a few of large enterprises and government organizations rather than SMEs (small and medium enterprises). In USA, both Yahoo! and Best Buy have stopped their flexible work because of its reported low productivity and job loafing problems. In addition, according to the literature on smartwork, we could draw obstacles of smartwork adoption and categorize them into the three types: institutional, organizational, and technological. The first category of smartwork adoption obstacles, institutional, include the difficulties of smartwork performance evaluation metrics, the lack of readiness of organizational processes, limitation of smartwork types and models, lack of employee participation in smartwork adoption procedure, high cost of building smartwork system, and insufficiency of government support. The second category, organizational, includes limitation of the organization hierarchy, wrong perception of employees and employers, a difficulty in close collaboration, low productivity with remote coworkers, insufficient understanding on remote working, and lack of training about smartwork. The third category, technological, obstacles include security concern of mobile work, lack of specialized solution, and lack of adoption and operation know-how. To overcome the current problems of smartwork in reality and the reported obstacles in literature, we suggest a novel smartwork service model based on NFC(Near Field Communication). This paper suggests NFC-based Smartwork Service Model composed of NFC-based Smartworker networking service and NFC-based Smartwork space management service. NFC-based smartworker networking service is comprised of NFC-based communication/SNS service and NFC-based recruiting/job seeking service. NFC-based communication/SNS Service Model supplements the key shortcomings that existing smartwork service model has. By connecting to existing legacy system of a company through NFC tags and systems, the low productivity and the difficulty of collaboration and attendance management can be overcome since managers can get work processing information, work time information and work space information of employees and employees can do real-time communication with coworkers and get location information of coworkers. Shortly, this service model has features such as affordable system cost, provision of location-based information, and possibility of knowledge accumulation. NFC-based recruiting/job-seeking service provides new value by linking NFC tag service and sharing economy sites. This service model has features such as easiness of service attachment and removal, efficient space-based work provision, easy search of location-based recruiting/job-seeking information, and system flexibility. This service model combines advantages of sharing economy sites with the advantages of NFC. By cooperation with sharing economy sites, the model can provide recruiters with human resource who finds not only long-term works but also short-term works. Additionally, SMEs (Small Medium-sized Enterprises) can easily find job seeker by attaching NFC tags to any spaces at which human resource with qualification may be located. In short, this service model helps efficient human resource distribution by providing location of job hunters and job applicants. NFC-based smartwork space management service can promote smartwork by linking NFC tags attached to the work space and existing smartwork system. This service has features such as low cost, provision of indoor and outdoor location information, and customized service. In particular, this model can help small company adopt smartwork system because it is light-weight system and cost-effective compared to existing smartwork system. This paper proposes the scenarios of the service models, the roles and incentives of the participants, and the comparative analysis. The superiority of NFC-based smartwork service model is shown by comparing and analyzing the new service models and the existing service models. The service model can expand scope of enterprises and organizations that adopt smartwork and expand the scope of employees that take advantages of smartwork.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.307-319
• /
• 2009

Carbon dioxide capture and storage (CCS) technology has been regarded as one of the most possible and practical option to reduce the emission of carbon dioxide ($CO_2$) and consequently to mitigate the climate change. Korean government also have started a 10-year R&D project on $CO_2$ storage in sea-bed geological structure including gas field and deep saline aquifer since 2005. Various relevant researches are carried out to cover the initial survey of suitable geological structure storage site, monitoring of the stored $CO_2$ behavior, basic design of $CO_2$ transport and storage process and the risk assessment and management related to $CO_2$ leakage from engineered and geological processes. Leakage of $CO_2$ to the marine environment can change the chemistry of seawater including the pH and carbonate composition and also influence adversely on the diverse living organisms in ecosystems. Recently, IMO (International Maritime Organization) have developed the risk assessment and management framework for the $CO_2$ sequestration in sub-seabed geological structures (CS-SSGS) and considered the sequestration as a waste management option to mitigate greenhouse gas emissions. This framework for CS-SSGS aims to provide generic guidance to the Contracting Parties to the London Convention and Protocol, in order to characterize the risks to the marine environment from CS-SSGS on a site-specific basis and also to collect the necessary information to develop a management strategy to address uncertainties and any residual risks. The environmental risk assessment (ERA) plan for $CO_2$ storage work should include site selection and characterization, exposure assessment with probable leak scenario, risk assessment from direct and in-direct impact to the living organisms and risk management strategy. Domestic trial of the $CO_2$ capture and sequestration in to the marine geologic formation also should be accomplished through risk management with specified ERA approaches based on the IMO framework. The risk assessment procedure for $CO_2$ marine storage should contain the following components; 1) prediction of leakage probabilities with the reliable leakage scenarios from both engineered and geological part, 2) understanding on physio-chemical fate of $CO_2$ in marine environment especially for the candidate sites, 3) exposure assessment methods for various receptors in marine environments, 4) database production on the toxic effect of $CO_2$ to the ecologically and economically important species, and finally 5) development of surveillance procedures on the environmental changes with adequate monitoring techniques.

• Journal of Distribution Science
• /
• v.14 no.2
• /
• pp.73-82
• /
• 2016

Purpose - Counterproductive work behavior(CWB) was typically categorized according to the behavior whether it targets other people(i.e., interpersonal CWB: I-CWB). Employing organizations(i.e., organizational CWB: O-CWB) has emerged as major concerns among researchers, managers, and the general public. An abundance of researches has informed us about the understanding for the antecedents of CWB, whereas little is known about the antecedents of CWB directed distribution service in employee's emotional labor. Therefore, the purpose of this research is to propose a research model in which surface acting enhances emotional exhaustion as an emotional labor strategy, which eventually increases counterproductive work behavior(including I-CWM and O-CWB). Research design, data, and methodology - This empirical research data were gathered from the samples of full time frontline hotel employees(including front office, call center, food/beverage, concierge, and room service) in South Korea. Six hotels were selected ranged from four to five stars, including privately owned and joint-venture properties. A convenience sampling method was used to select hotels. Full time frontline hotel employees from the six hotels were surveyed using a self-administered instrument for data collection. With the strong support of hotel managers, a total of 300 questionnaires were distributed, and 252 responses were collected indicating a response rate of 84.0%. In the process of working with the 252 samples, structural equation modeling is employed to test research hypotheses(H1: The relationship between surface acting and Interpersonal counterproductive work behavior(I-CWB) is mediated by emotional exhaustion, H2: The relationship between surface acting and organizational counterproductive work behavior(O-CWB) is mediated by emotional exhaustion). SPSS 18.0 and M-Plus 7.31 software were used for the data analysis. Descriptive statistics were used to assess the distribution of the employee profiles and correlations between factors. M-Plus 7.31 software was used to test the model fit, validity, and reliability of the factors, significance of the relationship between factors, and the effects of factors in the model. Results - To test our mediation hypotheses, we used an analytical strategy suggested by Preacher & Hayes (2008) and Shrout & Bolger (2002). This mediation approach directly tests the indirect effect between the predictor and the criterion variables through the mediator via a bootstrapping procedure. Thus, it addresses some weaknesses associated with the Sobel test. We found that surface acting was positively related to emotional exhaustion. Furthermore, emotional exhaustion was a significant predictor from the two kinds of counterproductive work behavior. In addition, surface acting was not significantly associated with the two kinds of counterproductive work behavior. These results indicated that the surface acting by frontline hotel employees was associated with higher emotional exhaustion, which is related with higher interpersonal counterproductive work behavior(I-CWB) and organizational counterproductive work behavior(O-CWB). In sum, we confirmed that the positive relationship between surface acting and the two kinds of counterproductive work behavior was fully mediated by emotional exhaustion. Conclusions - The current research broadens the conceptual work and empirical studies in counterproductive work behavior literature by representing a fundamental mechanism that how surface acting affects counterproductive work behavior.