• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1264-1270
• /
• 2010

In this study, the effects of slope inclination and rainfall on weathered soil slope stability were investigated for current cut soil slope design criteria. A series of slope stability analysis was performed on the slopes with the same height (5m), but different inclinations (1:0.8, 1:1, 1:1.2, 1:1.5, 1:2). Seepage analysis was also conducted to examine the rainfall effects directly and compare the combined seepage and slope stability analysis results with the slope stability analysis results for rainy season from the current cut soil slope design criteria. Typical properties for weathered soils were used in both the slope and seepage analysis. The analysis results showed that, for the slopes much steeper than the standard slopes, the factor of safety criteria were satisfied. Therefore, it appears that the slope designs by current cut soil slope design criteria lead to conservative results.

• Journal of the Korean Statistical Society
• /
• 제36권1호
• /
• pp.157-173
• /
• 2007

In this article it is considered that how the slope-rotatability property of a second order design for response surface model is affected by block effects and how the design points are assigned into the blocks so that the blocked design may have the property of slope-rotatability. If an unblocked design is blocked properly, it could be a slope-rotatable design with block effects and this property is named as block slope-rotatability. We approach this problem from the moment matrix of the blocked design, which plays an important role to get the variances of the estimates, and suggest conditions of block slope-rotatability.

• 지질공학
• /
• 제18권1호
• /
• pp.17-26
• /
• 2008

본 연구에서는 활동억지시스템으로 보강된 사면에 대한 설계법을 체계화하고, 이에 대한 설계 흐름도를 작성하여 합리적인 사면의 설계가 가능하도록 하였다. 제안된 사면의 설계법은 현장상황조사단계, 사면설계단계, 산사태발생 예측단계, 사면파괴규모 판단단계 및 보강공법 선정단계와 같이 5단계로 구성하였다. 사면파괴규모는 기존에 제안된 사면파괴의 위험성을 평가하는 국외의 각종 기준을 정리하고, 이를 국내에서 발생된 산사태 파괴규모와 함께 분석함으로서 정량적인 기준을 마련하였다. 사면활동체적은 파괴규모가 소규모인 경우 $150m^3$이하이고, 중규모인 경우 $150m^3{\sim}900m^3$이며, 대규모인 경우 $900m^3$상으로 분류하였다. 제안된 사면파괴규모를 토대로 각각의 파괴규모에 따라 활동억지시스템을 결정할 수 있도록 하였다. 한편, 활동억지시스템인 억지말뚝, 쏘일네일링 및 앵커에 대한 각각의 설계법을 제안하여 최적의 사면안정공법을 마련할 수 있도록 하였다.

• 품질경영학회지
• /
• 제14권1호
• /
• pp.26-32
• /
• 1986

A class of multi-factor designs for estimating the slope of second order response surfaces is presented. For multi-factor designs the variance of the estimated slope at a point is a function of the direction of measurement of the slope and the design. If we average the variance over all possible directions, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the design origin. This property is called "slope-rotatability over all directions", and the necessary and sufficient conditions for a design to have this property are given and proved. The class of design with this property is mainly discussed.

• Communications for Statistical Applications and Methods
• /
• 제7권2호
• /
• pp.415-426
• /
• 2000

Hader and Park (1978) introduced the idea of slope rotatability, and Park (1987) introduced the concept of slope rotatability over all directions, and gave necessary and sufficient conditions. Park and Kim (1992) proposed a measure that represent the extent of slope rotatability for a given response surface design. Kim (1993) proposed a measure that represent the extent of slope rotatavility over all directions. In this paper, we embodied the measure of slope rotatability over all directions. Examples of applying this measure to some response surface designs are also given. In this response surface design of slope rotatavility over all directions, we obtain the mean slope variances on the spherical surface to select better experimental design varying the number of center points and radius.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.129-136
• /
• 2005

The deterministic analysis method has generally used to evaluate the slope stability and it evaluates the slope stability with decision value that is a representative value of design variables. However, one of disadvantages in the deterministic approach is there is not able to consider the uncertainty of soil strength properties, even though it is the biggest influential parameter of the slope stability. On the other hand, the limit state design(LSD) can take a consideration of uncertainties and computes both the reliability index and the probability of failure. LSD method is capable of overcoming the disadvantages of deterministic method and evaluating the slope stability more reliably. In this study, both the mean value and standard deviation of the internal land's representative soil strength properties applied to process the LSD method. The major purpose of this study is to gauge the general applicability of the limit state design in soil slope and to weigh the comparative validity of the proposed partial safety factor. In order to reach the aim of this study, the partial safety factor and resistance factor which totally satisfied the slope's overall safety factor were calculated by the load and resistance safety factor design (LRFD).

• Journal of the Korean Statistical Society
• /
• 제31권2호
• /
• pp.153-161
• /
• 2002

A new method of construction of second order slope rotatable designs (SOSRD) using symmetrical unequal block arrangements (SUBA) with two unequal block sizes is suggested. The proposed method may sometimes lead to designs with less number of design points than those available in the literature. Further, bounds for the parameters of SOSRD are also obtained.

• 수산해양기술연구
• /
• 제44권4호
• /
• pp.273-281
• /
• 2008

In this study, the effect of slope length and angle at the entrance to fishing pots on the size of captured shrimp was examined to determine the optimal design of pots for use in Hokkaido, Japan. The purpose of the current study was to optimize the design of shrimp pots to allow greater control over the size of captured individuals for the purposes of shrimp resource management. Tank experiments were conducted to determine the optimal slope length and slope angle by analyzing the sizes of shrimp entering 10 model pots with combinations of five different slope lengths on slope angle of current shrimp pot, and five different angles on slope length of current shrimp pot. The results showed that, as the slope length of the pot increased, the size of individuals which entered the pot increased. In addition, as the slope angle was elevated in each of the five different slope angle treatments, the size of individuals entering was also increased.

• 한국조경학회지
• /
• 제33권6호
• /
• pp.127-139
• /
• 2006

Mt. Yokmang landscape design awarded first in [North container terminal site furtherance construction in Busan new port], design competition sponsoring in the Korea Container Terminal Authority in 2005. Design guideline was to propose the symbol of new port and to establish landscape plan in consideration of view and geological location. Because landscape plan required establishment of restoration plan for cutting slope, Mt. Yokmang became the major object. The purpose of planning are as follows. The first purpose is to minimize existent natural environment damage, and the second, to connect with ambit and create new image. The third is to provide place of rest and interchange for local resident. Reflecting stratum structure and landscape characteristics, cutting slope consisted of [utilization slope], [presentation slope], [landscape slope], and [ecological slope]. Vegetation design applied ecological restoration method through restoration of stratum, and eve environment-friendly afforestation, planned program that can connect area with existing ecosystem. In process that decides form of the cutting slope, analyze view structure and visual exposure in various access routes, sensitivity etc. was accomplished. Also, symbolic tower(Ocean Polaris) that presents in architecture and landscaping features, night landscape planning could gain synergy effect by keeping consistence with landscape and ecological planning. Passing through final design and construction process, I expect that the Mt. Yokmang will be a new landmark in Busan new port.

• Fisheries and Aquatic Sciences
• /
• 제12권4호
• /
• pp.342-349
• /
• 2009

The purpose of the current study was to optimize shrimp-pot design to allow greater control over the size of captured individuals for the purposes of shrimp resource management. Tank experiments were conducted to determine the optimal slope length and slope angle by analyzing the sizes of shrimp that entered 25 model pots with combinations of five different slope lengths and five different angles. Shrimp size was measured using carapace length. The results showed that as the slope angle of the pot increased, the size of individuals that entered the pot increased. Furthermore, as the slope length increased, each of the five different slope angles of the pot increased, and the size of individuals entering also increased. The data indicated that the optimum pot design for reducing the capture of immature individuals had a $75^{\circ}$ slope angle and a 35.4 cm slope length.