• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.388-392
• /
• 2003

In this study, various railroad geotechnical informations were standardized. The standardization was progressed by classifying the informations as basic properties, railroad vibrations and design plans. Basic informations included soil properties(27), dynamic property(1), geophysical prospecting(1), and elastic wave prospecting(4). Specification for 'human exposure to whole-body vibration' was used to construct the information of railroad vibration. And in the case of the information of design plan, the way to save by graphic files was chosen. Thus standardized informations examined their application by setting up database. Entity-Relation(E-R) model was used in the design of database and by this, the database system was constructed. This database system will be able to serve the performance enhancement of railroad system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.6
• /
• pp.266-271
• /
• 2001

In this paper, a controller design for coreless linear synchronous motor is proposed. The designed controller is mainly composed of speed and current control, which are carried out by the high-speed digital signal processor(DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented using by 32-bit DSP(TMS320C31), a high-integrated logic device(EPM940), and IPM(Intelligent Power Modules) for compact and powerful system design. The experimental results show the effective performance of controller for coreless linear synchronous motor.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1746-1755
• /
• 2003

Operating characteristics of a triple pressure reheat HRSG are analyzed using a commercial software package (Gate Cycle by GE Enter Software). The calculation routine determines all the design parameters including configuration and area of each heat exchanger. The off-design calculation part has the capability of simulating the effect of any operating parameters such as power load, process requirements, and operating mode, etc., on the transient performance of the plant. The arrangement of high-temperature and intermediate-temperature components of the HRSG is changed, and its effect on the steam turbine performance and HRSG characteristics is examined. It is shown that there could be a significant difference in HRSG sizes even though thermal performance is not in great deviation. From the viewpoint of both economics and steam turbine performance, it should be carefully reviewed whether the optimum design point could exist. Off-design performance could be one of the main factors in arranging components of the HRSG because power plants operate at various off-design conditions such as ambient temperature and gas turbine load, etc. It is shown that different heat exchanger configurations lead to different performances with ambient temperature, even though they have almost the same performances at design points.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.692-697
• /
• 2010

In this paper, a design program for electric railway pole foundation was developed by applying the estimation study performed by Korean Railway. There are two kinds of shapes in the cross-section of electric railway pole foundation: rectangle and circle. In foundation designing, The rectangular foundation should be satisfied with vertical, horizontal and moment equilibrium equations. On the other hand, the circular foundation should be satisfied with horizontal and moment equilibrium equations. The design program was coded into MFC(Microsoft Foundation Class) by MS Visual C. The equation's roots in the program were obtained by Incremental Search method. Dialog and property sheet(Wizard Mode) input windows were selected for user-friendliness. The biggest advantage of this program is to find an optimum depth in a given section.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.462-467
• /
• 2008

In this paper, we investigated the design method of mooring system in ultra deep sea and carried out the conceptual design for offshore West Africa oil field in ultra deep sea of 3000 meters. Recently, it was feasible to design and install the offshore floating structures in deep sea of up to 2000 meters. Due to the simplicity, two-point mooring design is fully utilized. Force-excursion curves are throughly examined to find out the feasibility of various combinations of mooring lines. Free length and pretension effects are discussed. It is found that composite materials including synthetic fiber rope may be good solution for ultra deep sea mooring design.

• Plant Journal
• /
• v.10 no.4
• /
• pp.29-34
• /
• 2014

In this consideration, this research investigated the piping design items and drew out key design items through interview with experts and surveys to apply them to actual project examples and look into piping design item-specific significance and cost variation ranges. Based on this investigation, the Monte-Carlo simulation was employed herein to analyze the cost variation range for the entire piping design costs with a view to presenting a way to calculate a reasonable bidding price for any similar project and verify the appropriateness of joining a bid.

• Journal of the Korean housing association
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2010

Housing problems in city have being caused social contradiction that contains social discord and conflict between poor and rich. And they have raised one of social problems including a disequilibrium of demand and supply, a housing trouble, and a poor residential environment. Therefore, the purpose of this study is to suggest to the improvement of social housing that exposes to a poor environment for social integration. For this, this study is to extract environmental-friendly design factors for each building phase by in-depth evaluation of experts, and to analyze the problems of domestic social housing and environment-friendly design factors considered prior literature. The results as follow. It might be considered highly phase of schematic design, The building construction, and performance management having factors. Specially, it analyzed to 'Living Environment', 'Economic Efficiency', and 'renewable Energy Systems' should be considered highly. Ultimately, this study would be reconsidered the improvement of social housing proposed by the Government for the social outcast.

• Design & Manufacturing
• /
• v.9 no.3
• /
• pp.9-13
• /
• 2015

Plastic material has been applied to many automobile parts with the automotive lightweighting trend. In this study, a passenger air bag(PAB) housing which is produced by steel material in the present were molded using a plastics material. Before design and making of a mold for the PAB housing molding, it was carried out injection molding analysis. By analyzing the deformation results, the correction dimension for mold designing was determined. The design and manufacturing the mold applied the correction dimension were conducted. It was performed actual injection molding. The warpage value of the PAB housing was similar to the warpage of the injection molding analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.13-19
• /
• 2010

A design method of railway wheel profile with objective function of equivalent conicity considering wheel dimension constraint, two points contact problem between wheel and rail was proposed. New design method shows good results. New wheel profile generated from optimization process shows better dynamic performance compared with initial profile as the purpose of wheel profile design. And to verify the design method with testing the stability of new wheel profile, we conducted a critical speed test for new wheel profile using scale model applied scaling method of railway vehicle dynamics. The result of critical speed test show good agreement with that of numerical analysis. From the above results, it is seen that the design method with objective function of equivalent conicity is feasible and it could be applied to design new wheel profile efficiently.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.277-286
• /
• 2004

In this study, summary of past tilt-rotor concept development presented, and based on that, major pros and cons of tilt-rotor technology compared to other air-vehicle concept was presented. Also presented were major design features, considerations and sizing constraints of tilt-rotor configuration implemented to the development of Smart UAV. It is hoped that this paper be served to understand the tilt-rotor air-vehicle design and development.