• The Journal of Small Business Innovation
• /
• v.19 no.2
• /
• pp.53-68
• /
• 2016

Motivation and activities for technological learning, entrepreneurship, innovation, and creativity are driving forces of economic development in Asian countries. In the early stages of technological development, technological learning and entrepreneurship are efficient ways in which to catch up with advanced countries because firms can accumulate skills and knowledge quickly at relatively low risk. In the later stages of technological development, however, innovation and creativity become more important. This study aims to identify a) the factors (learning capabilities) that influence technological learning performance and b) barriers to enhancing innovation capabilities for the creative economy and organizations. The major part of this study is related to learning capabilities in the post-catch-up era. Based on a literature review and observations from Korean experiences, this study proposes a technological learning model composed of various influencing factors on technological learning. Three hypotheses are derived, and data are collected from Korean machine tool manufacturers. Intense interviews with CEOs and R&D directors are conducted using structured questionnaires. Statistical analysis, such as correlation and ANOVA are then carried out. Furthermore, this study addresses how to enhance innovation capabilities to move forward. Innovation enablers and barriers are identified by case studies and policy analysis. The results of the empirical study identify several levels of firms' learning capabilities and activities such as a) stock of technology, b) potential of technical labor, c) explicit technological efforts, d) readiness to learn, e) top management support, f) a formal technological learning system, g) high learning motivation, h) appropriate technology choice, and i) specific goal setting. These learning capabilities determine firms' learning performance, especially in the early stages of development. Furthermore, it is found that the critical factors for successful technological learning vary along the stages of technology development. Throughout the statistical and policy analyses, this study confirms that technological learning can be understood as an intrinsic principle of the technology development process. Firms perform proactive and creative learning in the late stages, while reactive and imitative learning prevails in the early stages. In addition, this study identifies the driving forces or facilitating factors enhancing innovation performance in the post catch-up era. The results of the preliminary case studies and policy analysis show some facilitating factors such as a) the strategic intent of the CEO and corporate culture, b) leadership and change agents, c) design principles and routines, d) ecosystem and collaboration with partners, and e) intensive R&D investment.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.133-146
• /
• 2017

In recent years, the development and market participation of major makers of next-generation eco-green vehicles has been accelerating. Consumer interest has also increased. Consumer characteristics, consumption type, characteristics of next-generation eco-friendly vehicles, and government policies on next eco-green vehicles. The results of this study are as follows. In Korea, there was no significant difference by gender, age, monthly average income, and consumer type. However, there was no significant difference in purchase intention by gender, age, and monthly income, Respectively. In the case of Japan, there was no significant difference by gender, age, monthly income, and consumer type. In Korea, on the other hand, images such as brand, color, and design have positive effects on eco-friendly vehicles. In the case of Japan, image and stability have a positive effect on consumers' purchasing behavior. Therefore, it is important for Japanese consumers to consider not only the image of purchasing an eco-friendly vehicles, but also the safety of the vehicles body, appear. In the case of Korea, the socio-environmental value-seeking type has a significant relationship with the purchasing intention. In the case of socio-environmental value-seeking type, the government's support policy such as carbon dioxide tax, direct support from the national or local governments, gasoline tax, Carbon tax and fuel related tax relief showed positive effects. In the case of Japan, the price-seeking type and the socio-environmental value-seeking type were found to have a significant relationship with the purchasing intention. Both the price-seeking type and the socio-environmental value-seeking type showed that the carbon dioxide tax, Direct support, gasoline tax, gasoline tax, and carbon tax, etc. have positive effects.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.1
• /
• pp.22-30
• /
• 1999

This experiment was carried out to determine the forage yield and mineral contents of silage corn(Zea mays L.), and N balance, soil chemical characteristics and nitrate-N level in infiltration water by different types and N rates of liquid manure applied. Seven treatments consisting of chemical fertilizer $200kg\;N;ha^{-1}$, liquid cattle manure 200, 320 and $440kg\;N;ha^{-1}$, liquid swine manure 200, 320 and $440kg\;N;ha^{-1}$ were arranged in a randomized complete block design with three replications. The results obtained at National Livestock Research Institute, RDA, in Suweon from May 1997 to Aug. 1997 are summarized as follows : There were no significant differences in percentage of dry matter among the treatments, but significant dry matter yield differences were found (P<0.05), and also the mean dry matter yield of liquid swine manure plot was higher than that of liquid cattle manure plot. Potassium, calcium and magnesium contents of silage corn increased with increasing liquid manure application rates (P<0.05). Nitrate-N content of silage corn in the liquid cattle manure treatments was not influenced by liquid manure application rates, but that in the liquid swine manure treatments increased with increasing the N rates of liquid manure application. pH and contents of exchangeable canons of the soil after experiment were raised by increasing the amount of liquid manure application. Available $P_2O_5$ content in topsoil(0-10cm) was highest as $340mg\;kg^{-1}$ at the plot of liquid swine manure $440kg\;N;ha^{-1}$. Concentration of nitrate-N in infiltration water increased at the plot of liquid swine manure $440kg\;N;ha^{-1}$. Amount of nitrogen balance increased with increasing liquid manure application rates. Based on the results of this experiment, it is suggested that the mean dry matter yield of liquid swine manure plot was higher than that of liquid cattle manure plot, and the amount of nitrogen balance increased with increasing liquid manure application.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.5
• /
• pp.74-86
• /
• 2015

The purpose of this study was to deduce the landscape evaluation indices that can be applied from the preparation for the registration of major national farm/fishery heritages to post-management. For this purpose, the Delphi survey was performed on experts. From August to November in 2014, the primary open survey, secondary open survey, and tertiary closed survey were performed to gather opinions from 28 experts, 25 experts, and 29 experts, respectively. As a result, the landscape evaluation indices for farm/fishery heritage consisted of five areas of evaluation, ten items of evaluation, and 40 indices of evaluation. The areas of evaluation were rurality, authenticity, aesthetics, tourism potentials, and locality. Rurality was classified into rurality of farm/fishery towns and nostalgia. Authenticity was classified into objective authenticity and existential authenticity. Aesthetics was classified into attractiveness and harmony. Tourism potentials were classified into value of resources and value of usability. Locality was divided into physical originality and cultural identity. The study made the following findings: first, the general grounds of farm/fishery landscape evaluation cannot be applied when evaluating the quality of landscapes of farm/fishery heritage, as their value as a cultural heritage should be considered. Second, the new indices valued emotional factors in addition to the physical factors considered by the existing farm/fishery landscapes. The new indices involved a more expanded concept of landscapes as it also considers everyday or temporary activities, including the farm/fishery activities of local people or participation in festivals and experience programs. Third, farm/fishery heritage focuses on the lives of local people, as it involves both the synchronic and the diachronic perspectives to see what is currently visible and what is no longer visible. This brings into consideration not only the farms and the natural environments but also their relationships with the villages, especially the residential areas. Finally, the indices reflected both the farm/fishery heritage's value as cultural heritage and its value for tourism. They derived temporary and dynamic landscapes, including the trading activities of local specialty markets in relation to the production landscapes. However, further studies should be conducted as this study could not rate the relative importance of indices or compare the total scores of landscapes without the weight of each item.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.1
• /
• pp.17-22
• /
• 1999

Experiment was carried out to determine the agronomic characteristics, forage yield of silage corn(Zea mays L.) soil chemical characterictics and $NO_3-N$ level in infiltration water by different application rates of daily liquid manures. Four treatment consisting of chemical fetilizer, $200kg\;N\;ha^{-1}$, daily liquid manure $200kg\;N\;ha^{-1}$, $300kg\;N\;ha^{-1}$ and $400kg\;N\;ha^{-1}$ were arranged in a randonmized complete block design with three replicates. The results obtained at National Livestock Research Institute, RDA., in Suwon from 1996 to 1997 are summarized as follows; In plant height and crude protein content, it were appeared to highest by 264cm, 6.8% at the cattle slurry 150% plot(T3), respectively. but Dry matter yield(14.5MT/ha) and TDN(9.5MT/ha) production of chemical fertilizer plot(T1) were highest. Among daily liquid manure amount, dry matter yield(14.0MT/ha) and TDN yield(9.1MT/ha) of daily liquid manure 100% plot(T2) were resulted to 96% and 97% of chemical fertilizer plot(T1). End year's soil organic matter and phosphate content were appeared to high than those of beginning year in daily liquid manure plots, but it was not in proportioned to increase according to slurry amount. $NO_3-N$ level in infiltration water lower than 60cm of all plots were lowed than a permitted limit of cattle drinkable. As a result, it was appeared that the optimum application amount of dairy liquid manure was 200kg/ha by manure-N.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.167-171
• /
• 2004

The growth of soybean sprout was greatly influenced by watering systems： Fixed watering system (water tub was loaded at ceiling upper of culture box and water was showered by bottom holes) was estimated the better than that of reciprocating watering and tub immersing watering because it could cool down the temperature in culture box and wash the organic substances on the body of sprout. The fixed watering system showed good body color and preventing effect of partial rotting of sprout because it could discharge $\textrm{CO}_2$ gas effectively in culture box and keep the concentration below 5%. The concentration of gases at the bottom (about 30 cm height from basal plate) of culture box in fourth or fifth days was L6% for $\textrm{CO}_2$ and 13-16% for $\textrm{O}_2$, respectively. The optimum gas concentration in culture box was considered to be over 10% for $\textrm{O}_2$ and below 5% for $\textrm{CO}_2$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.3
• /
• pp.37-48
• /
• 2009

The standardization of marketing has been one of the most focused research topics in international marketing. The term "global marketing" was often used to mean an internationally standardized marketing strategy based on similarities between foreign markets. Marketing standardization was discussed only within the context of traditional physical marketplaces. Since then, the digital "marketspace" of the Internet had emerged in the 90's, and it became one of the most important drivers of the globalization process opening new opportunities for the standardization of global marketing activities. On the other hand, the opinion that a greater adoption of the Internet by customers may lead to a higher degree of customization and differentiation of products rather than standardization is also quite popular. Considering this disagreement, it is notable that comprehensive studies which focus upon the marketing standardization especially in the context of global e-commerce are missing to a high degree. On this background, the two basic research questions being addressed in this study are: (1) To what extent do companies standardize their marketing in international e-commerce? (2) Is there an impact of marketing standardization on the performance (or success) of these companies? Following research hypotheses were generated based upon literature review: H 1: Internationally engaged e-commerce firms show a growing readiness for marketing standardization. H 2: Marketing standardization exerts positive effects on the success of companies in international e-commerce. H 3: In international e-commerce, marketing mix standardization exerts a stronger positive effect on the economic as well as the non-economic success of companies than marketing process standardization. H 4: The higher the non-economic success in international e-commerce firms, the higher the economic success. The data for this research were obtained from a questionnaire survey conducted from February to April 2005. The international e-commerce companies of various industries in Germany and all subsidiaries or headquarters of foreign e-commerce companies based in Germany were included in the survey. 118 out of 801 companies responded to the questionnaire. For structural equation modelling (SEM), the Partial-Least. Squares (PLS) approach in the version PLS-Graph 3.0 was applied (Chin 1998a; 2001). All of four research hypotheses were supported by result of data analysis. The results show that companies engaged in international e-commerce standardize in particular brand name, web page design, product positioning, and the product program to a high degree. The companies intend to intensify their efforts for marketing mix standardization in the future. In addition they want to standardize their marketing processes also to a higher degree, especially within the range of information systems, corporate language and online marketing control procedures. In this study, marketing standardization exerts a positive overall impact on company performance in international e-commerce. Standardization of marketing mix exerts a stronger positive impact on the non-economic success than standardization of marketing processes, which in turn contributes slightly stronger to the economic success. Furthermore, our findings give clear support to the assumption that the non-economic success is highly relevant to the economic success of the firm in international e-commerce. The empirical findings indicate that marketing standardization is relevant to the companies' success in international e-commerce. But marketing mix and marketing process standardization contribute to the firms' economic and non-economic success in different ways. The findings indicate that companies do standardize numerous elements of their marketing mix on the Internet. This practice is in part contrary to the popular concept of a "differentiated standardization" which argues that some elements of the marketing mix should be adapted locally and others should be standardized internationally. Furthermore, the findings suggest that the overall standardization of marketing -rather than the standardization of one particular marketing mix element - is what brings about a positive overall impact on success.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1562-1570
• /
• 2005

The purpose of this thesis is to find the effective way of practical education in the fashion related department in order to supply the appropriate experts to the Korean apparel manufacturers located in Dalian, China. The interviews were made twice from $25^{th}$ of Feb. to $15^{th}$ of Mar. 2005 and from $28^{th}$ of July to 31st of July 2005 through the method ot a direct interview with the CEOs of the 7 representative apparel manufactures. The results of the interviews were as following. Seven companies$(100\%)$ participated in the survey all complained of insufficient workers. Also the companies were having difficulties at finding appropriate workers who can handle designing, management, and circulation, because specialists who are fluent in Korean and Chinese are very rare. Moreover, Korean apparel manufacturers are now taking a step further to launch a high quality fashion brand, getting out of the simple hand work depending on low wage or low-tech(6 companies $85.7\%$). Thus, well-educated fashion specialists(intermediate manager) are required on the part of Korean clothing companies or apparel manufacturers in China. It is expected the intermediate managers and the specialists who are capable of launching a new brand will be urgently needed. Therefore, appropriate educations in Korea would be essential to minimize the problems the Korean fashion specialists might face in China. 1 would like to present three suggestions. 1. The highly educated Korean fashion specialists on apparel industry will be a solution both to the high jobless status in our country and to the deficiency in human resources of Korean apparel manufacturers in Dalian. 2. The students in the college should learn how to write down the working chart and matching chart in practical conditions. Taking an intern-ship in working factories in China during a certain period of time will be helpful. 3. The experts should be trained with emphasis on the quality, design, and value of the brand. This study will be used as a base for Koreans who work in fashion related department to enter the Chinese fashion market having a great potential.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.4
• /
• pp.295-300
• /
• 2008

This experiment was conducted to compare forage production and feed value of winter forage crops at the experimental field of Livestock Division, National Institute of Animal Science from 2003 to 2004 in Jeju. The experiment was arranged in slit plot design with three replications. Main plots consisted of two cutting times, one time cutting and two times cutting. Sub plots consisted of 5 different seed combinations, T1 (Italian ryegrass), T2 (Oat), T3 (Italian ryegrass 25+Oat 75%), T4 (Italian ryegrass 50+Oat 50%), T5 (Italian ryegrass 75+Oat 25%). One time cutting showed the highest dry matter (DM) yield by 18,680 kg/ha. Tow times cutting showed the highest crude protein (CP) content by 11.97%. The all treatments have narrow range of total digestible nutrient (TDN) from 60.6% to 70.4%.