• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.281-289
• /
• 2012

Objective: The purpose of this study is to evaluate the potential risk of shoulder muscle at particular working postures in sitting. Background: The cause of shoulder pain needs to be specifically studied in relation with particular shoulder postures to prevent shoulder MSDs in workplace. Method: In this study MVC, fatigue and subjective workload were investigated depending on the change of shoulder posture. An experiment was designed to evaluate the six shoulder muscles at nine shoulder postures including the combination of 30(adduction), 0, 30(abduction) degrees and 60, 90, and 120 degrees of shoulder flexion. Surface electrodes were attached to the middle trapezius, inferior middle trapezius, anterior deltoid, posterior deltoid, serratus anterior and teres major. Thirteen subjects participated in the experiment. Dependent variables were RPE (rating of perceived exertion), MVC(maximum voluntary contraction) and MPF(mean power frequency) shift by EMG (electromyography). Results: The middle trapezius and inferior middle trapezius were not significantly fatigued at all postures. The decline of MPF slope was less than 10% at all postures. The anterior deltoid was significantly fatigued all postures. The decline of MPF slope was more than 10% at all postures. The posterior deltoid was significantly fatigued 30 degrees of adduction and 90 degrees of flexion. And, neutral and 30 degrees of abduction postures were fatigued more than 90 degrees of flexion. The serratus anterior was significantly fatigued except for 30 degrees of adduction and 60 degrees of flexion posture. The teres major was significantly fatigued except for neutral and 60 degrees of flexion, 30 degrees of abduction and 60 degrees of flexion posture. Conclusion: It was found that a certain muscle was fatigued fast at particular posture compared to other muscles, which would mean that a certain shoulder muscle at particular posture could be easily exposed to the risk of musculoskeletal disorders than other muscles. Application: It is expected that the result can be applied to design workplace using shoulder muscles.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.90-96
• /
• 2009

In this study, a generic airfoil designed by the inverse method was evaluated with several candidate airfoils as a first step. Each airfoil was compared with respect to aerodynamic performance to meet the requirement of HALE(high altitude long endurance) aircraft. The second step was to optimize the candidate airfoil using the couple of optimization formulations to down select an optimum airfoil. For the analysis of low Reynolds number 2D flow, Drela's MSES was used. After comparing the aerodynamic results, the best airfoil was chosen to construct the baseline 3D wing. The Navier-Stokes code was used to evaluate the overall aerodynamic performance of designed wing with other wings. The results show that the designed wing has the best performance compared with other wings.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.495-503
• /
• 2019

Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.

• Archives of design research
• /
• v.14 no.1
• /
• pp.167-176
• /
• 2001

In 21st century as a digital era, visual communication design becomes more important than any other period. Recently, traditional typographic design for the communication with emphasis on the readability and experimental typographic design with emphasis on the expressionism contrary to the traditional concept coexists. There have been experiments on the typography with the establishment of modem art concept in the past: this trend is more obvious since the 1980s with the technological development of desktop computer. In this study, experimental typography works by David Carson who is one of the most representative graphic designers of the 1990s are analyzed in detail, and problems and prospects of this experimental typography in a digital era contrary to the traditional viewpoint we discussed.

• Korean Institute of Interior Design Journal
• /
• no.23
• /
• pp.100-108
• /
• 2000

The study intends to systematically arrange and classify the museum layouts in terms of their structure of exhibition space. The exhibition space, here, means the whole area where visitors are allowed to move and visit in museums. Through this, I tied to understand the characteristics and trends comparing and analyzing international and national exhibition space layout, and then grope the standard in case of establishing museum. The first criteria is based on the point of view that the typical museum experience is made in the exhibition space. Accordingly, the exhibition space can be grouped into two categories; one is 'room type' consisting mostly of individual rooms as in classical museums, and the other is 'open plan type' consisting free standing walls as in miesian free plan. The second criteria is dependent on the way how visitors move about in exhibition spaces. In other words, museum layouts can be categorized in terms of mutual connection between individual spaces including exhibition spaces and corridor spaces designated for the purpose of moving. consequently, the layouts can be categorized into five groups such as 'free plan', 'linear type', 'room to room', 'room & corridor' and 'composition type'. The third criteria is about the overall structure of museum layouts including such elements as whether it contains a certain type of central major space or not and whether and how the exhibition spaces are connected to it. By applying these classificatory criteria, the study analyzed and classified 90 sample of museum layouts in order to understand clearly and succintly the spatial characteristics and implications contained in them.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.239-244
• /
• 2015

Recently, Impulse radars using UWB technologies are widely use for measuring distance, or for transmitting uncompressed high resolution videos. However, since the UWB band spans over octave bands, it is not easy to design such a system. Wide band impedance matching is required for antennas and other RF area. In this study, we designed and fabricated sinuous antenna for 3~6 GHz octave band application. We also designed and attached a dielectric lens to improved the directional gain of the antenna. The gain of the antenna was 6~10 dBi. The dielectric lens attached sinuous antenna was used to transmit HD video data. The maximum reach distance was 90 meter with 10mW power.

• International Journal of Advanced Culture Technology
• /
• v.5 no.1
• /
• pp.90-97
• /
• 2017

Nowadays, the most of commercial buildings are build-out with complex architecture and decorated with more complicated interiors of buildings so establishing intelligible escape routes becomes an important case of fire or other emergency in a limited time. The commercial buildings are already equipped with multiple exit signs and these exit signs may create confusion and leads the people into different directions under emergency. This can jeopardize the emergency situation into a chaotic state, especially in a complex layout buildings. There are many research focused on implementing different approached to improve the exit sign system with better visual navigating effects, such as the use of laser beams, the combination of audio and video cues, etc. However the digital signage system based emergency exit sign management is one of the best solution to guide people under emergency situations to escape. This research paper, propose an intelligent evacuation route GUIDE that uses the combination centralized Wireless Sensor Networks (WSN) and digital signage for people safety and avoids dangers from emergency conditions. This proposed system applies WSN to detect the environment condition in the building and uses an evacuation algorithm to estimate the safe route to escape using the sensor information and then activates the signage system to display the safe evacuation route instruction GUIDE according to the location the signage system is installed. This paper presented the prototype of the proposed signage system and execution time to find the route with future research directions. The proposed system provides a natural intelligent evacuation route interface for self or remote operation in facility management to efficiently GUIDE people to the safe exit under emergency conditions.

• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.465-475
• /
• 2010

For this study, 18 kinds of cut and sew or seamless knitted test garment were made. Samples differed from each other by skirt angles($90^{\circ}$, $180^{\circ}$), gauges(7G, 12G, 15G), and grain directions(bias direction, wale direction, and radial direction). After measuring the mechanical properties of various gauges on the seamless knitting machine, I compared shape of the knitted flare skirt through subjective evaluation on appearances. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, Duncan-test, correlation analysis, and regression analysis. The subjective evaluation on appearances of knitted flare skirts showed the following: In case of $90^{\circ}$ skirt, the seamless skirt showed a much higher score in every gauge expect that of the cut and sew 12G, and silhouette of 15G wale direction. In case of the $180^{\circ}$ skirt, the seamless type showed a much higher score in every item over the cut and sew expect the silhouette part of 7G wale direction.

• Journal of Sasang Constitutional Medicine
• /
• v.33 no.1
• /
• pp.90-101
• /
• 2021

Objectives The purpose of this study was to evaluate intervention studies on Sasang Constitutional diet (SCD) through the checks of Participant, Intervention, Comparison, and Outcome (PICO) Methods Randomized controlled trial (RCT) and non-randomized study for intervention (NRSI) about SCD were searched in 4 Korean core databases and other sources, and then PICO was checked. Results 1. Total 10 studies were conducted with 1 RCT and 9 NRSIs. 2. Participants were people with no specific disease, or patients with essential hypertension, hyperlipidemia, obesity, or stroke with diabetes or hyperlipidemia. Most studies were conducted on groups of various Sasang Constitutional types except Taeyangin. 3. Two studies provided participants with meals and exercise. Three studies, instead of providing meals directly, taught participants how to eat SCD on their own. 4. NRSIs have tested the effectiveness of various outcome measures without the presentation of primary outcome, and then concluded that all outcomes were ineffective or some are effective. 5. There was no mention of adverse events. In most studies, a single doctor of Korean medicine diagnosed Sasang Constitution the QSCC II questionnaire. The intervention period ranged from three weeks to three months, and recent studies have conducted interventions for 12 weeks. Conclusions Intervention studies about SCD which were conducted so far have shown problems on the study design of PICO items. The study design and implementation that carefully consider how to maintain similarity between groups, minimize the risk of bias, set primary outcome measure, and control the diet are required.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.3
• /
• pp.171-178
• /
• 1992

The effect of nozzle characterristics on the mist-cooling heat transfer was investigated under the various flow conditions. Two different types of twin fluid nozzle were used, one is a $90^{\circ}$ angle tip nozzle with needle and the other is a $90^{\circ}$ angle tip non-needle nozzle. The cooling rate from the heated surface was measured and obtained the boiling curve as a function of surface temperature. An immersion sampling was employed for the measurement of droplet size of the spray. As a result of this experiment, the liquid sheet type nozzle shows better atomization when the mass ratio Mr>2.0, and collects more liquid droplets on the heated surface that results in better cooling effect. It was found that the maximum heat flux and heat transfer coefficient increased with increase in the volumetric flow rate, whereas the maximum heat flux decreased with increase in spray distance. The cooling effect depends upon the amount of collected droplet and droplet size, but it strongly depends upon the amount of collected droplet.