• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.34-37
• /
• 2017

In recent emerging industry, Display field becomes bigger and bigger, and also semiconductor technology becomes high density integration. In Flat Panel Display, there is an issue that electrostatic phenomenon results in fine dust adsorption as electrostatic capacity increases due to bigger size. Destruction of high integrated circuit and pattern deterioration occur in semiconductor and this causes the problem of weakening of thermal resistance. In order to solve this sort of electrostatic failure in this process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. X-ray Generating efficiency has an effect on soft X-ray Ionizer affects neutralizing performance. There exist variable factors such as type of anode, thickness, tube voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was measured according to target material thickness using MCNPX under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W), Gold(Au), Silver(Ag). At the result, Gold(Au) shows optimum efficiency. In Tube voltage 5 keV, optimal target thickness is $0.05{\mu}m$ and Largest energy of Light flux appears $2.22{\times}10^8$ x-ray flux. In Tube voltage 10 keV, optimal target Thickness is $0.18{\mu}m$ and Largest energy of Light flux appears $1.97{\times}10^9$ x-ray flux. In Tube voltage 15 keV, optimal target Thickness is $0.29{\mu}m$ and Largest energy of Light flux appears $4.59{\times}10^9$ x-ray flux.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.80-87
• /
• 2018

In recent years, due to the spread of various renewable energy power sources and the pursuit of high efficiency and low-power consumption, not only trends in the electric power industry but also the consumption, control methods, and characteristics are diversified. However, in this diversified electric power industry, the fuse (which is the core part responsible for safety) has not developed significantly in classical operation mode, and thus, fires continue to occur. In this paper, the effects of low melting-point metal plating and high melting-point metal plating on operating characteristics and IT curve movement of the fuse are investigated in a cartridge fuse, which is a classic fuse manufacturing method. The effects of plating on the thickness of the fuse are investigated, and various operating characteristics of the fuse are implemented. In addition, it is suggested that the plating of the low melting-point metal moves the rated current line of the fuse to a low rating, and moves operating characteristics to characteristics of delay operation. It is possible to design various operating characteristics using this characteristic.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.4
• /
• pp.499-506
• /
• 2006

Response surface methodology was used to investigate the cookie manufacturing process with black rice flour. A three- variable, three-level central composite design was employed where the independent variables were the amount of black rice flour ($0{\sim}20%$), baking time ($10{\sim}14 min$), and sugar type (sucrose, aspartame and oligosaccarides). pHs of dough and cookie tended to increase with the addition of black rice flour. Moisture content of dough slightly increased with tile addition of black rice flour but nearly affected by baking time. Spread factor increased with the addition of black rice flour and it was more evident in the samples prepared with sucrose. L*-value decreased but a*-value increased significantly with the addition of black rice flour. Generally the amount of black rice flour in the sample did not affect the textural characteristics of cookie. As the amount of black rice and baking time increased, sensory flavor became stronger. Sensory sweetness as well as hardness increased but sensory color became darker with the addition of black rice flour. In addition, the response surface models developed in this study for most of physicochemical and sensory characteristics of black rice cookie were adequate.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.2
• /
• pp.95-104
• /
• 2013

Objectives : The purpose of this study is to analyze internal research trends of work-related musculoskeletal disorders(WMSDs) and provide problems of researches forward. Methods : 6 Korean databases were searched for articles of WMSDs published from 2000 to 2012, and 264 research were systematic reviewed. An analytical method was used descriptive statistics, an actual number and percentage. Results : The results of distribution by year were reported more than 20 articles after 2004, and 45 articles in 2009. Industrial classification distribution of research subjects the manufacturing industry was many most at the 84. Research contents in most description were 147 whether it was risk factor and relation. Research design type of articles was most description survey research 226. In the research field 89 articles were reported to the journal related to technologies. Conclusions : It is considered to be necessary that ergonomic approach would cooperate with other approaches such as integrated health management system as well as industrial medicine considering psychosocial factors.

• Journal of dental hygiene science
• /
• v.13 no.3
• /
• pp.290-295
• /
• 2013

The purpose of this study was to investigate the shear bond strength between various commercial all-ceramic system core and veneering ceramics, and evaluate the clinical stability by comparing the conventional metal ceramic system. The test samples were divided into three groups: Ni-Cr alloy (metal bond), yttria-stabilized, tetragonal zirconia polycrystal (Y-TZP) (zirconia bond), lithium disilicate (lithium disilicate bond). The veneering porcelain recommended by the manufacturer for each type of material was fired to the core. After firing, the specimens were subjected to shear force in a universal testing machine. Load was applied at a crosshead speed of 0.50 mm/min until failure. Average shear strengths (mega pascal) were analyzed with a one-way analysis of variance and the Tukey test (${\alpha}$=0.05). The mean shear bond strength${\pm}$SD in MPa was $44.79{\pm}2.31$ in the Ni-Cr alloy group, $28.32{\pm}4.41$ in the Y-TZP group, $15.91{\pm}1.39$ in the Lithium disilicate group. The ANOVA showed a significant difference among groups (p<0.05). None of the all-ceramic system core and veneering ceramics could attain the high bond strength values of the metal ceramic combination.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.5-13
• /
• 2014

Purpose - The purposes of this editorial review are twofold: firstly, to introduce the four flagship international journals of the Korea Distribution Science Association(KODISA): the Journal of Distribution Science(JDS), the Journal of Industrial Distribution & Business(JIDB), the East Asian Journal of Business Management(EAJBM), and the Journal of Asian Finance, Economics and Business(JAFEB), and secondly, to identify the direction of the KODISA journals and the roles and responsibilities of the editors of the KODISA journals. Research design, data, and methodology - To achieve the goals, firstly, this review paper addresses the current progress of the four KODISA journals: JDS, JIDB, EAJBM, and JAFEB. Secondly, this paper defines the aims and missions of the four KODISA journals. JDS publishes the articles of examining past, current, and emerging trends and concerns in the area of distribution science and economics, logistics and SCM, transportation, distribution channel management, distribution innovation and information technology, merchandising and procurement, distribution and marketing, consumer behavior, and manufacturing, wholesaling, and retailing. JDS publishes both quantitative and qualitative research as well as scholarly commentaries, case studies, book reviews and other types of reports relating to all aspects of distribution. JIDB publishes the articles of examining past, current, and emerging trends and concerns in the areas of industry and corporate behavior, industry policy making, industrial distribution and business, e-commerce, and service industry. EAJBM publishes empirical and theoretical research papers as well as scholarly commentaries, case studies, book reviews, and other types of reports relating to all aspects of East Asian business and economy. JAFEB publishes original research analysis and inquiry into the contemporary issues of finance, economics and business management in Asia, including Central Asia, East Asia, South Asia, Southeast Asia, and Middle East. The mission of JAFEB is to bring together the latest theoretical and empirical finance, economics and business management research in Asian markets. The audiences of the KODISA journals include higher education institutions, scholars, industry researchers and practitioners, scientists, economists, and policy makers throughout the world. The main mission of the KODISA journals is to provide an intellectual platform for international scholars, promote interdisciplinary studies in social sciences and economics, and become leading journals in the social science and economics category in the world. Thirdly, this paper addresses the current status of indexing in major databases of the KODISA journals, namely: Cabell's Directories, EBSCO, SCOPUS (Elsevier), and Social Sciences Citation Index^® (SSCI, Thomson Reuters). Fourthly, this paper identifies the roles and responsibilities of the editors of the KODISA journals as the following: (1) Make sure that the journal be published in a timely manner and in international standards both in print and online versions. (2) Maintain the online homepage of the journal is always accessible to, and (3) Make sure that every article should go through a peer review process that meets international standards. Findings and conclusion - To accomplish the goals and missions of the KODISA journals, the editors of the KODISA journals must work together to publish high scholarly journals that meet international standards of journal publications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.228-238
• /
• 2020

In order to deliver fixed partial denture to a patient successfully, dentist must take into many considerations beforehand. Patient's occlusal pattern should be fully understood before delivering any type of prosthesis, whether it's canine guidance or group function occlusion. In order to do so, movement of mandible should be recorded precisely. Introduced by Meyers in 1933, functionally generated path technique (FGP) has been successfully used to record mandibular movement with various materials, such as wax, and utilize it in fabricating precise prosthesis. In the following cases, patients showed secondary caries or endodontic-periodontic lesion on maxillary molars. Root canal treatment and subgingival curettage were done for each patient. Since the long term prognosis of each tooth was questionable, lateral force should be minimized. In order to do so, FGP technique was used to record mandibular movements precisely. Instead of using conventional plaster impression, intra-oral scanning of wax tracing was done to fabricate prosthesis efficiently. After delivery of fixed partial denture, favorable outcome was obtained.

• Composites Research
• /
• v.32 no.1
• /
• pp.21-28
• /
• 2019

Recently, according to environmental regulations, the automobile industry has been conducting various research on the use of composite materials to increase fuel efficiency. However, there has not been much research on lightweight chassis components. Therefore, in this research, the purpose of this study is to apply composite materials to the sub-frame of chassis components to achieve equivalent levels of stiffness, strength, NVH performance and 50% lightweight compared to the steel sub-frame. First, the Natural frequency of steel and composite specimens was compared to the damping characteristics of composite materials. Then, in this study, the Lay-up Sequence was derived to maximize the stiffness and strength of the sub-frame by applying composite materials. And this lay-up Sequence is proposed to avoid heat shrinkage due to curing during manufacturing. This process was designed based on a FEM structural analysis, and a Natural frequency and frequency response function graph was confirmed based on a modal analysis. The prototype type composite sub-frame was manufactured based on the design and the F.E.M analysis was verified through a modal experiment. Furthermore, it was fitted to the actual vehicle to verify the natural frequency and the indoor noise vibration response, including idling and road noise. This result was confirmed to be equivalent to the steel sub-frame. Finally, the composite sub-frame weight was confirmed to be about 50% of the steel sub-frame.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.116-125
• /
• 2021

A three-dimensional (3D) intraoral scanner, which is one of the major developments in digital dentistry, is widely used in fixed prosthodontics. The application of intraoral scanner is now increasing in removable prosthodontics. Sclerotic change induced by scleroderma causes the limitation of mouth opening and multiple loss of the teeth. Conventional prosthodontic procedures are challenging for patients with this disease. This study showed a case of digital approach to the removable prosthodontic treatment of a patient who had the scleroderma and the consequent microstomia. At the provisional stage, the optical impression of patient's oral structures was digitally obtained. Using a 3D printer, the provisional dentures were fabricated. After extraction of hopeless tooth, the definitive digital impression was taken and the metal frameworks were fabricated, based on the data acquired from the impression. The definitive removable partial dentures were completed and delivered to the patient, who was satisfied with the prostheses.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.263-275
• /
• 2022

The loss of posterior occlusal support leads to further complications such as collapsed occlusal plane and reduced vertical dimension, and it may cause problems such as facial appearance change, reduced chewing efficiency, and temporomandibular joint disorders. In such case, it is necessary to re-establish occlusal plane and vertical dimension properly through accurate diagnosis and predictable treatment plan. This case report presents a 71-year-old female, whose occlusal plane was collapsed and posterior restorative space was insufficient. To perform a patient-friendly full mouth rehabilitation, proper vertical dimension and occlusal plane were decided by evaluation of interocclusal space at her physiologic mandibular rest position, swallowing, pronunciation, facial appearance, and the average length of anterior teeth. And then, the fixed provisional restorations were fabricated with the new occlusal position, and evaluated for 5 months with checking adaptation of masticatory muscles and any kind of clinical symptoms occurs or not. After confirmation of functional stability and esthetic satisfaction with the newly established occlusion, final definitive restorations were fabricated and inserted in the mouth. Through the above process, the treatment result was functionally and aesthetically satisfactory.