• Computers and Concrete
• /
• v.1 no.3
• /
• pp.303-324
• /
• 2004

The Component-Based Software Development (CBSD) has established itself as a sound paradigm in the software engineering discipline and has gained wide spread acceptance in the industry. The CBSD relies on the availability of standard software components for encapsulation of specific functionality. This paper presents the framework for the development of a software component for the design of general member cross-sections. The proposed component can be used in component-based structural engineering software or as a stand-alone program developed around the component. This paper describes the use-case scenarios for the component, its design patterns, object models, class hierarchy, the integrated and unified handling of cross-section behavior and implementation issue. It is expected that a component developed using the proposed patterns and model can be used in analysis, design and detailing packages to handle reinforced concrete, partially prestressed concrete, steel-concrete composite and steel sections. The component can provide the entire response parameters of the cross section including determination of geometric properties, elastic stresses, flexural capacity, moment-curvature, and ductility ratios. The component can also be used as the main computational engine for stand-alone section design software. The component can be further extended to handle the retrofitting and strengthening of cross-sections, shear and torsional response, determination of fire-damage parameters, etc.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.96-103
• /
• 2003

The historical separation between organization studies and architecture area created a design environment in which wort processes are evaluated separately from setting where they occur. The impact of separation has been parallel yet disconnected development in th two disciplines in which the advance in one arena have not precipitated advances in the other. This is the unfortunate loss as each discipline has the potential to contribute directly to the other. With the emergence of new economy the opportunity to realign the tow disciplines is once again presented as new ways of working have enhanced this opportunity. It is important to revisit the historical development of the tow disciplines and to discuss how the misalignment of their respective concerns contributed to the establishment of our current situation. What happened to create an environment in which organizations assume that one of their largest capital expenditures the cost of providing work spaces for employees is unrelated to their work process\ulcorner what recent developments offer opportunities to rectify this dilemma\ulcorner In this study it is presented a historical review of organization studies and architecture. Through examination of these areas across time it becomes quite apparent that it is now appropriate to pose new questions about organization and their architecture. The comparison of two parallel developments explains how the current design environment is separated from organization studies and offers compelling evidence for why it is important to revisit this separation in light of contemporary theories on collaborative work, organizational learning and communities of practice.

• Structural Engineering and Mechanics
• /
• v.64 no.4
• /
• pp.437-447
• /
• 2017

Explicit expressions for rapid prediction of inelastic design quantities (considering cracking of concrete) from corresponding elastic quantities, are presented for multi-storey composite frames (with steel columns and steel-concrete composite beams) subjected to service load. These expressions have been developed from weights and biases of the trained neural networks considering concrete stress, relative stiffness of beams and columns including effects of cracking in the floors below and above. Large amount of data sets required for training of neural networks have been generated using an analytical-numerical procedure developed by the authors. The neural networks have been developed for moments and deflections, for first floor, intermediate floors (second floor to ante-penultimate floor), penultimate floor and topmost floor. In the case of moments, expressions have been proposed for exterior end of exterior beam, interior end of exterior beam and both interior ends of interior beams, for each type of floor with a total of twelve expressions. Similarly, in the case of deflections, expressions have been proposed for exterior beam and interior beam of each type of floor with a total of eight expressions. The proposed expressions have been verified by comparison of the results with those obtained from the analytical-numerical procedure. This methodology helps to obtain the inelastic design quantities from the elastic quantities with simple calculations and thus would be very useful in preliminary design.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.247-259
• /
• 2013

This study conceptually approaches and clearly compares the similarities and differences of fashion and architecture through a focus on their correlations. This study identifies the conceptual definitions of functional minimalism by an examination of function that represents the largest similarity between architecture and fashion. This study classifies the nature of functional minimalism and studies cases for each architectural classification in the areas of: the simplicity of a structure, unitarity pursuit of economic value, repeatability in an efficiency unit, reducibility stressing property, and multi-functional spatiality. The characteristics of functional minimalism fashion are distinguish as: simplicity in a structure that highlight structural lines in non-decorated design, unitarity pursuit of economic value represented in united process and pattern for its economic effect, repeatability in an efficiency unit represented through the repeated decoration of a functional unit, reducibility stressing a property that emphasizes property with a dominant design element through a highlight of the characteristics of materials and multi-functional spatiality that represents variability in clothes through an expansion of limited spatial function. This study approaches each discipline with a clear understanding of the differences between the two and suggests standards for a comparative study of architecture and fashion.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.30 no.2
• /
• pp.7-14
• /
• 2024

Purpose: This study aims to examine the trends in healthcare architecture research by analyzing papers published in KIHA (Journal of the Korea Institute of Healthcare Architecture) and HERD (Health Environments Research and Design Journal) in the USA. The analysis categorizes these papers into Evidence-Based Design (EBD) and non-EBD research from a comparative perspective. Methods: A systematic literature review was conducted on 370 papers published in KIHA and 399 papers published in HERD from 2007 to 2022. The research trends were analyzed based on the researchers' fields of study, research focus, and research attributes. Results: The findings indicate that HERD involves researchers from 43 different fields, whereas KIHA involves researchers from 16 fields, indicating less diversity. HERD predominantly includes interdisciplinary and empirical studies, while KIHA primarily features theoretical and single-discipline studies. Papers in HERD generally demonstrate a higher level of evidence compared to those in KIHA. Implications: Direct comparisons should be approached with caution due to the differing contexts of healthcare architecture research in the two countries. The methodological efforts in HERD and the functional analysis results in KIHA provide valuable references for the future direction of healthcare architecture research. Expanding collaborative and interdisciplinary research involving various professionals is essential to advance the field.

• The Korean Nurse
• /
• v.37 no.4
• /
• pp.72-84
• /
• 1998

This study has been done for the purpose of testing the effects of education for women's health on the performance of health promoting behavior and self esteem of college women. The study was designed as simulated control group pretest-posttest design, the experimental group was composed 182 college women and the control group was composed 151 college women at D University in Seoul. The instruments used for this study were Health Promoting Behavior Scale developed by Walker et al(1987)were modified by Shin(1997) and Self Esteem Scale developed by Rosenberg(1965). The data were analyzed by chi-square test, t-test and ANCOVA using $SPSSIPC^+$ program. The results were as follows: 1. The result of the homogeneity test in terms of the demographic characteristics of two group showed that there were significant difference in major discipline($x^2=155.854$, p=.000), religion($x^2=6.325$, p=.011), and disease experience($x^2=3.949$, p=.046). 2. Hypotheses 1 that the college women who get women's health education will have a higher score of health promoting behavior than the college women who do not get women's health education was supported. The score of health promoting behavior between two group showed statistically difference(t=7.25, p= .000). Mer control of covariates(major discipline, religion, and disease experience), the score of health promoting behavior between two group showed statistically difference(F=31.817, p= .000). 3. Hypotheses 2 that the college women who get women's health education will have a higher score of self esteem than the college women who do not get women's health education was supported. The score of self esteem between two group showed statistically difference(t=4.91, p= .000). After control of covariates(major discipline, religion, disease experience), the score of self esteem between two group showed statistically difference(F=12.688, p= .000). The following suggestions are made based on the above results : 1) Replication of the research is needed to confirm effects of health education including the college man and various demographic differences. 2) More effective health education programs appropriate to subject need to be developed. 3) Nursing college or departments of nursing should make an effort to develop and carry out various health education program for health for all.

• The Journal of Industrial Distribution & Business
• /
• v.5 no.2
• /
• pp.29-35
• /
• 2014

Purpose - The study aimed to evaluate the market opportunities and constraints confronting resource-poor pig farmers in South Africa. Research design, data, and methodology - Information was collected from 292 households in three municipalities through interviews with key informants. The data collected included socio-economic characteristics, major market channels, prices for different pig classes, average weight of the pigs on sale, number of pigs sold annually, and preferred meat quality attributes. Results - In Ngqushwa, 96% of respondents sold pigs as compared to Elundini (81%) and Ntabankulu (65%). Less resource-poor households and those with market-oriented production had large herdsizes (P < 0.05) when compared to more resource-poor farmers. The probability of selling pigs was high for the backyard production system and educated farmers. For all farmers, opportunities included high pork demand, good prices, employment creation, and a niche market for organically produced indigenous pork. Constraints include disease, feed shortages for large herds, distances to formal markets, lack of training, and drugs. Conclusions - Constraints outnumbered opportunities for the resource-poor pig farmers.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10665-10673
• /
• 2015

Background: We wished to analyse patterns of use of needle biopsy procedures by BreastScreen Australia (BSA) accredited programs to identify areas for improvement. Design: BSA services provided anonymous data regarding percutaneous needle biopsy of screen detected lesions assessed between 2005-2009. Results: 12 services, from 5 of 7 Australian states and territories provided data for 18212 lesions biopsied. Preoperative diagnosis rates were 96.84% for lesion other than microcalcification (LOTM) and 93.21% for microcalcifications. At surgery 97.9% impalpable lesions were removed at the first procedure. Of 11548 Microcalcification (LOTM) biopsied, 46.9% were malignant. The final diagnosis was reached by conventional core biopsy (CCB) in 72.46%, FNAB in 21.33%, VACB in 1.69% and open biopsy in 4.52% of lesions. FNA is being limited to LOTM with benign imaging After FNAB, core biopsy was required for 38% of LOTM. In LOTM the mean false positive rate (FPR) was 0.36% for FNAB, 0.06% for NCB and 0% for VACB. Diagnostic accuracy was 72.75% for FNAB and 92.1% for core biopsies combined. Of 6441 microcalcifications biopsied 2305 (35.8%) were malignant. Microcalcifications are being assessed primarily by NCB but 6.57% underwent FNAB, 45.6% of which required NCB. False positive diagnoses were rare. FNR was 5% for NCB and 1.53% for VACB. Diagnostic accuracy was 73.52% for FNAB, 86.29% for NCB and 88.63% for VACB. Only 8 of 12 services had access to VACB facilities. Conclusions: BSA services are selecting lesions effectively for biopsy and are achieving high preoperative diagnosis rates. Gaps in the present accreditation standards require further consideration.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.87-93
• /
• 2002

A complex network and a parallel computer are made up of interconnected switching units. The role of a switching unit is to set up a connection between an input port and an output port, according to the routing information. We proposed our switching network with a remodeled architecture is a newly modified Banyan network with eight input and output ports. We have analysed the maximum throughput of the revised switch. Our analyses have shown that under the uniform random traffic load, the FIFO discipline is limited to 70%, The switching system consists of an input control unit, a switch unit and an output control unit. Therefore the result of the analyses shows that the results of the networking simulation with the new switch are feasible and if we adopt the new architecture of the revised model of the Banyan switch, the hardware complexity can be reduced. The FIFO discipline has increased by about 11% when we compare the switching system with the input buffer system. We have designed and verified the switching system in VHDL using Max＋plusII. We also designed our test environment including micro computers, the base station, and the proposed architecture. We proposed a new architecture of the Banyan switch for BISDN networks and parallel computers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.66-75
• /
• 2017

Priority disciplines are an important scheme for service systems to differentiate their services for different classes of customers. (N, n)-preemptive priority disciplines enable system engineers to fine-tune the performances of different classes of customers arriving to the system. Due to this virtue of controllability, (N, n)-preemptive priority queueing models can be applied to various types of systems in which the service performances of different classes of customers need to be adjusted for a complex objective. In this paper, we extend the existing (N, n)-preemptive resume and (N, n)-preemptive repeat-identical priority queueing models to the (N, n)-preemptive repeat-different priority queueing model. We derive the queue-length distributions in the M/G/1 queueing model with two classes of customers, under the (N, n)-preemptive repeat-different priority discipline. In order to derive the queue-length distributions, we employ an analysis of the effective service time of a low-priority customer, a delay cycle analysis, and a joint transformation method. We then derive the first and second moments of the queue lengths of high- and low-priority customers. We also present a numerical example for the first and second moments of the queue length of high- and low-priority customers. Through doing this, we show that, under the (N, n)-preemptive repeat-different priority discipline, the first and second moments of customers with high priority are bounded by some upper bounds, regardless of the service characteristics of customers with low priority. This property may help system engineers design such service systems that guarantee the mean and variance of delay for primary users under a certain bounds, when preempted services have to be restarted with another service time resampled from the same service time distribution.