• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.114-122
• /
• 2014

This paper describes a study of the design conditions of a planar surface dielectric barrier discharge (DBD) reactors for generating negative air ions. The capacity of negative air ion generated by the surface DBD reactor is affected by the shape, area ratio and the location of the discharge and induction electrodes of it. To study the optimal design conditions of DBD reactors, the electrodes printed on the substrate of a PCB board is utilized to conduct kind of experiments: the distance of the each electrode along with the X-Y axis, the area ratio of the discharge electrode to induction electrode, and the symmetrical and asymmetrical location of two electrodes. The ion generation capacity is inverse proportional to the gap increases along with X-Y axis. And the optimum ion concentration generated by the ionizer was inspected when the electrodes area ratio was 3 and 5 times of the symmetrical and asymmetrical experimental condition respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.97-98
• /
• 2008

In 6.6kV Rotary Machine Stator Windings, Corona Discharge, Discharge at Conductor Surface, Slot Discharge and Endwinding Discharge is happended by electronic degradation. Also, if Partial Discharge cause in inner-part of Rotary Machine Stator Windings, it will be happended voltage and current pulse. In case of discharge spark, RF electromagnetic wave, which transmits at discharge position, can happen. To detect this kind of RF electromagnetic wave efficiently, we have designed Planar Antenna Sensor with the CST MWS simulation program. Also we have confined the application possibility, which can analyzes the partial discharge in Rotary Machine Stator Windings. In the Future, sample of planar antenna sensor will be able to compare with the data of simulation by CST MWS program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.222-223
• /
• 2007

In 6.6kV Rotary Machine Stator Windings, Corona Discharge, Discharge at Conductor Surface, Slot Discharge and Endwinding Discharge is happended by electronic degradation. Also, if Partial Discharge cause in inner-part of Rotary Machine Stator Windings, it will be happended voltage and current pulse. In case of discharge spark, RF electromagnetic wave, which tranmits at discharge position, can happen. To detect this kind of RF electromagnetic wave efficiently, we have designed Planar Antenna Sensor with the CST MWS simulation program. Also we have confined the application possibility, which can analize the partial discharge in Rotary Machine Stator Windings. In the Future, sample of planar antenna sensor will be able to compare with the data of simulation by CST MWS program.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.173-173
• /
• 2015

The flood water level in tidal river is determined by the joint effects of flood discharge and tidal water levels at downstream boundary. Due to the variable tidal boundary conditions, the evaluated design water levels associated with a certain flood event can be significantly different. To avoid determining of design water levels just by a certain tidal boundary condition and remove the influence of variability in boundary condition from the evaluation of design water levels, a probabilistic approach is considered in this study. This study focuses on the development of a method to evaluate the realistic design water levels in tidal river with taking into account the combined effects of river discharge and tidal level. The flood water levels are described by the joint probability of two driving forces, river discharge and tidal water levels. The developed method is applied to determine design water levels for the tidal reach of the Han River. An unsteady flow model is used to simulate the flow in the reach. To determine design water levels associated with a certain flood event, first, possible boundary conditions are obtained by sampling starting times of tidal level time series; then for each tidal boundary condition, corresponding peak water levels along the channel are computed; and finally, design water levels are determined by computing the expectations of the peak water levels. Two types of tides which are composed by different constituents are assumed (one is composed by $M_2$, and the other one is composed by $M_2$ and $M_2$) at downstream boundary, and two flood events with different maximum flood discharges are considered in this study. It is found that (a) the computed design water levels with two assumed tides have no significant difference for a certain flood event, though variability of peak water levels due to the tidal effect is considerably different; (b) tidal effect can reach to the Jamsil submerged weir and the effect is obvious in the downstream reach of the Singok submerged weir; (c) in the tidally affected reach, the variability of peak water levels due to the tidal effect is greater if the maximum flood discharge is smaller.

• 한국수자원학회논문집
• /
• 제42권12호
• /
• pp.1113-1124
• /
• 2009

구하도 및 폐천복원은 하천에서의 이수와 치수적인 기능뿐만 아니라 환경 및 생태 서식처 기능을 강화하고 개선하기 위한 여러 방법들 중 하나이며 이러한 구하도를 복원하기 위해서는 주수로와의 하도 안정성을 고려하여 횡단면 형태를 결정하고 하도선형을 설계하게 된다. 이러한 하도설계시 기준이 되는 유량이 반드시 필요하며 이 기준유량을 하도형성유량 또는 지배유량이라고 한다. 일반적으로 하도형성유량을 산정하는 방법으로는 만제유량, 특정 재현기간별 유량, 유효유량을 계산하여 결정하는 방법이 있다. 본 연구에서는 구하도 복원 사업이 시행되는 청미천 구간에 대해 만제유량, 특정 재현기간별 유량, 유효유량을 산정하여 상호 관계를 분석하고 과거의 하상변동 특성 자료와 비교하여 연관성을 평가하였다. 청미천 구하도 복원구간의 만제유량은 HEC-RAS 자료를 이용하여 만제수위에 해당되는 유량으로 산정하였으며 488 $m^3/s$인 것으로 나타났고 이는 1.5년과 2년 빈도 사이의 유량에 포함되는 것으로 나타났다. 또한 유사량 자료와 과거 일유량 자료를 이용하여 계산된 유효유량은 만제유량보다 큰 값을 갖는 것으로 나타났다. 과거 측량자료 분석에 의하면 청미천의 대상구간 하도는 1994년에 비해 2008년 현재 하도가 침식된 것으로 나타났으며 이는 유효유량을 소통시킬 수 있는 형태로 하도가 진화하고 있다는 것을 의미하며 곧 하천이 안정한 상태로 변화하고 있다는 것을 의미한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.275-284
• /
• 1998

Standard on the carbon dioxide extinguishing system was prepared by the committed of the national fire protection assocition(NFPA)in USA on 1980. And this code is also applied to the design of a marine fire extinguishing system The most important problem in design is the uniform discharge of $CO_2$ through each nozzle from the high pressure $CO_2$ storage facility. The purpose of this paper is to develop the computer software to design the marine fire protection piping system. By solving the continuity equation energy equation and Bernoulli's equation simulataneously the flowrate in branch pipelines and discharge nozzles can be calculated.

• Spatial Information Research
• /
• 제15권2호
• /
• pp.159-167
• /
• 2007

본 연구에서는 현재 홍수설계에 적용되고 있는 Huff 방법이 집중호우사상에까지 확장 적용될 가능성이 있는지를 확인하고자 하였다. 이를 위해 2006년 7월 집중강우가 발생한 평창 오대천 유역을 중심으로 집중강우에 의한 실측 강우량과 이를 Huff방법에 의해 설계 강우량으로 환산하고 유출량을 산출하고 또한 홍수위로 환산하여 흔적수위와 비교하였다. 비교 결과 설계강우에 의해 산출된 홍수량은 실제 발생했던 실제 집중강우를 적용하였을 경우의 첨두홍수량에 비해 1/2정도에 불과한 작은 값을 보였다. 또한 실제 집중호우에 의해 발생한 홍수량은 단시간에 발생한 강우사상임에도 불구하고 적용대상유역의 150년 빈도 홍수량에 근접하는 것으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.255-258
• /
• 2005

In this study, new types of counter electrode discharge cells for PDP were designed. The counter electrode discharge cells were designed to realize long-gap discharge mode, low firing voltage and moderate conductance for evacuation and sealing process of the panel. In order to test the concept of the design, macro discharge cells were prepared and the discharge characteristics were evaluated. The results indicate that discharge behavior may be modified significantly by changing the morphology of discharge cells.

• 설비공학논문집
• /
• 제13권2호
• /
• pp.96-105
• /
• 2001

R410a which is one of HFC refrigerants is being considered to be a promising replacement for R22 widely used in domestic air conditioners. The rolling piston type rotary compressors for R410a have lower energy efficiency than those for R22 because of the high pressure difference between a suction chamber and a discharge chamber in the compression mechanism. in addition, the re-expansion gas loss of the rotary compressor for R410a which occurs a ta clearance volume in a discharge port becomes larger than that for R22 due to high density of R410a refrigerant. Therefore, Pressure-Volume analyses for various design parameters of a discharge system were carried out to improve efficiency of a R410a rotary compressor. The results such as performance dta, over-compression loss, and re-expansion loss were acquired by P-V analyses and analyzed quantitatively. As a conclusion, the optimal specifications of several design parameters of a discharge system were obtained by analyzing P-V diagrams.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1512-1516
• /
• 2018

The power system and control system constantly reveals surge voltage such as switching surge of lighting devices and power conversion devices, operating and stops surge of rotating devices, charge & discharge surge, opening & closing surge of circuit breakers and the like. Such a surge voltages can cause damage or malfunction of the element such as CPU, Memory, semiconductor etc. In the industry, in order to protect the system from the surge voltage, a surge protector with low discharge starting voltage, fast response time, and low capacitance is required, and technical development research for that is ongoing. In this paper, in order to solve the problem of the existing GDT discharge tube not discharging from the transient voltage which is higher than the commercial voltage and lower than the discharge voltage of the discharge element, we have developed a discharge element having the control electrode & control circuit. The discharge element having the control electrode and the control circuit can control the discharge voltage according to the needs of the consumer and can satisfy the requirement of the discharge element and the technology of the surge protector downsizing technology and the surge protection technology. It is judged to be effective for development.