• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.6
• /
• pp.442-450
• /
• 2020

A small-signal modeling approach for a three-level boost (TLB) converter and a design methodology for a double-loop controller are proposed in this study. Conventional modeling of TLB converters involves three state variables. Moreover, TLB converters have two operation modes depending on the duty ratio. Consequently, complex mathematical calculations are required for controller design. This study proposes a simple system modeling method that uses two state variables, unlike previous methods that require three state variables. Analysis shows that the transfer functions of the two operation modes can be expressed as identical equations. This condition means that the linear feedback controller can be applied to all operational ranges, that is, for full duty ratios. The design method for a double-loop controller using a PI controller is presented in step-by-step sequences. Simulation and experimental verifications are conducted to verify the effectiveness of the small-signal analysis and control system design.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.40-46
• /
• 1993

In this paper, we design a multirate controller for a given multirate sampled-data system which has a periodic output measurement scheme. A sufficient condition for maintaining observability in multirate sampled-data systems is given first. The design strategy for disturbance rejection is proposed. The proposed controller has IMC structure, and can be deomposed into a disturbance estimator and the inverse of fast plants.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.13-16
• /
• 1989

The paper, introduce the real time controller Design method of heavy load 6-DOF motion simulator. And also, introduce the Geometric design of 6-DOF Motion generation, real time control A algorithm and the configuration method of real time controller H/W and S/W.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.292-292
• /
• 2000

Since high-power CO$_2$ Laser can be make a high densed energy to Local processing area, manufacturing processes using the laser can be processed for very Localized areas at a very fast rate with minimal or no distortion. Accordingly, the laser has been widely used in the fields of thermal manufacturing processes such as welding, fusion cutting, grooving, and heat treatment of metals. In particular, interest in the laser heat treatment process has grown tremendously in the past few years. In this process, maintaining the uniform hardening depth is important problem to obtain good quality products and to reduce heat induced distortion and residual stress. For achieving this objective, we introduced a new design technique of a fuzzy logic controller that greatly simplified the design procedure by defining several simplified design parameters. In the design procedure, the major design parameters of the controller are characterized by identifying several common aspects. From a series of simulation results, we found that the proposed design technique can be effectively used to design of a fuzzy logic controller for the LASER surface hardening process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.6
• /
• pp.30-39
• /
• 2014

Through a lot of papers, it has been concluded that fuzzy logic controller is superior to PI controller in motor speed control. Although fuzzy logic controller is superior to PI controller in motor speed control, the gain tuning of fuzzy logic controller is more complicated than that of PI controller. In this paper, using mathematical analysis of the PI and fuzzy controller, the design method of the fuzzy controller that has the same characteristics with the PI controller is proposed. After that, we can design the fuzzy controller that has superior performance than PI controller by changing the envelope of input of fuzzy controller to nonlinear, because the fuzzy controller has more degree of freedom to select the control gain than PI controller. The advantage of fuzzy logic controller is shown through mathematical analysis, and the simulation result using Matlab simulink has been proposed to show the effectiveness of these analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.8-13
• /
• 2004

In the paper, we present a practical design tool which allows us to design PID types and the first order lead/lag compensators incorporating the step response requirements in the stability. For a given plant transfer function of arbitrary order, this program provides a set of controller gains that satisfies both stability and time domain performances. This implies that even if one selects any controller parameters inside the set, the closed loop system with the controller gains meets the design objectives. This tool based on Matlab and GUI will be very useful for control design in the controller parameter space, especially when time domain requirement is given.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.4
• /
• pp.25-35
• /
• 1987

This paper deals with the design of the digital controller for DC servo motor, and it is implemented for the cartesian coordinate 4 axes manipulator. A design method of the controller is adopted an algorithm using the digital position locked loop(DPLL) method and the linear PID control for the smooth motion. To simplify the hardware configuration of control system, 8279 keyboard/display controller, Z-80 CTC counter and 8255 PPI are used. Therefore the design method to control each motor as real-time is presented. To show effectiveness of the design, the PWM circuit and frequency/voltage converter are applied for the velocity control of robot system. When the proposed controller is applied to the 4-axes manipulator, it reveals that the error probabilities of X, Y and Z axis as 0.033%, 0.023% and 0.028% respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1513-1518
• /
• 1996

A force reflecting hand controller can be used to provide more realistic information to the operator of a teleoperation system such as kinesthetic feedback from a slave robot. In this paper, a new design concept of a force reflecting 6-DOF hand controller utilizing the kinematic structure of a Stewart Platform is presented. Based on the optimal design technique of a Stewart Platform, a force reflecting hand controller has been designed and constructed to verify the technical feasibility of proposed design concept. In order to provide an operator with kinesthetic feedback information, a force mapping algorithm based on a reciprocal product of screws has been introduced. Finally, the technical feasibility of the design concept has been demonstrated through some of experimental results of the device under virtual environment on a real-time graphic system.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.3
• /
• pp.139-145
• /
• 2001

In this paper, we consider the H$_2$(or guaranteed cost control) and H$_{\infty}$ controller design methods for singular(or descriptor) systems with input time delay. Also, a mixed H$_2$and H$_{\infty}$ controller design algorithm is treated by combination of the proposed H$_2$and H$_{\infty}$ controller design method. The sufficient conditions for the existence of controllers and controller design methods are introduced at each Lemma and Theorem. Furthermore, we present optimization problems to get the upper bound of performance measures. The proposed methods are checked by examples.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1071-1076
• /
• 2004

It is a fuzzy controller that it is the most used method in the control of non-linear system. The most important part in the fuzzy controller is a design of fuzzy rules. Many algorithm that design fuzzy rules have proposed. And attention to the evolutionary computation is increasing in the recent days. Among them, the co-evolutionary algorithm is used in the design of optimal fuzzy rule. This paper takes advantage of a schema co-evolutionary algorithm. In order to verify the efficiency of the schema co-evolutionary algorithm, a fuzzy controller for the mobile robot control is designed by the schema co-evolutionary algorithm and it is compared with other parasitic co-evolutionary algorithm such as a virus-evolutionary genetic algorithm and a co-evolutionary method of Handa.