• 제어로봇시스템학회논문지
• /
• 제19권4호
• /
• pp.281-284
• /
• 2013

This paper describes a reduced observer design problem for one-sided Lipschitz nonlinear systems which are considered as a generalization of Lipschitz systems. The sufficient conditions to ensure the existence of reduced order observer are provided by using linear matrix inequalities. Moreover, it is shown that existence conditions of reduced order observer can be obtained from sufficient conditions on the existence of full order observer. As a result, this fact implies that the existence of full order observer for one-sided Lipschitz systems guarantees that of reduced order observer. Finally, a simulation example is given to verify the validness of the proposed design.

• 한국기계가공학회지
• /
• 제9권4호
• /
• pp.8-13
• /
• 2010

The constant velocity internal grinding is a popular process for studying axle machine design and process in automobile industry. In this study, The program which gives the data of wheel size and truing diameter of ball groove is developed. As a result I obtained the data of grinding conditions makes good surface roughness get a grinding conditions. The grinding characteristics and conditions of constant velocity joint were investigated with respect to grinding feed, cutting depth, grinding time. At machine failure, the results were suddenly increased and the detailed surfaces were extremely obtained. Grinding condition was big more affected by grinding depth, grinding speed and grinding time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.3-8
• /
• 2001

For the successful design of nuclear reactor, it is very important to investigate thermal-hydraulic characteristics of fuel rod bundle. Fluid flow and heat transfer in the non-circular cross-section of nuclear fuel rod bundle are different from those found in common circular tube. And complex three dimensional flow including secondary and vortex flow, is formed around the bundles. The purpose of this research is to examine how geometries and flow conditions affect heat transfer in fuel rod bundle. Design data for nuclear fuel rod bundle and structure are surveyed, and $3{\times}3$ sub-channel model is adopted in this study. Computational results are compared with the heat transfer data measured by naphthalene sublimation method, and numerical analysis and evaluation are performed at various design conditions and flow conditions.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.177-186
• /
• 1994

Most causes of accidents are due to physical unsafety conditions and human unsafety actions. The design of safety work by ergonomics method is one of the methodes which effectively reduce these unsafety conditions and unsafety actions. This paper presents considerations in design of safety work. And when we try to analyze the accident event by means of probability, there exist some problems because of fuzziness in physical unsafety conditions' components and human unsafety actions' components which are the causes of basic event. For this reason, it is impossible for input probability of basic event to define a crisp value. In consideration of the uncertain probability of components, this paper deals with the Fuzzy set theory by membership value and suggests calculation procedure and analysis of disaster event.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.411-413
• /
• 1995

Porcelain insulators have been used for the almost all of the suspension insulators in distribution line. However, Puncture breakdowns in porcelain insulators caused by westing cement between metal fitting and porcelain material. There is little puncture breakdown in Epoxy casting insulator. This paper presents a new design technique for the development of suspension insulator used Cycloaliphatic Epoxy resin. The design was performed on the basis of two conditions (weather conditions for the past 30 years and the existing installation conditions of KEPCO) and was proven of its adaptability by FEM method.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.804-811
• /
• 2010

The fatigue crack propagation is stochastic in nature, because the variables affecting the fatigue behavior are random and have uncertainty. Therefore, the fatigue life prediction is critical for the design and the maintenance of many structural components. In this study, fatigue experiments are conducted on the specimens of magnesium alloy AZ31 under various conditions such as thickness of specimen, the load ratio and the loading condition. The probability distribution fit to the fatigue failure life are investigated through a probability plot paper by these conditions. The probabilities of failure at various conditions are also estimated. The fatigue design life is predicted by using the Weibull distribution.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.68-72
• /
• 2002

Design of experiment was applied to analyze the shrinkage characteristics of the bobbin molded by injection molding. Among lots of design and processing conditions, the thickness of a bobbin and cooling conditions of a mold were considered. The temperature difference between top and bottom parts of the bobbin was considered as the objective to minimize the shrinkage of a bobbin. Optimal thickness of a bobbin was 2.0mm at the part of body and 1.5mm at the part of wing, respectively. Optimal cooling conditions such as cooling time and coolant inlet temperature were 12 second and $12^{\circ}C$, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.65-71
• /
• 1997

Computer simulations and test trials are carried out to get the optimal conditions about the stamping die design of the tailor laser welded automotive door inner. Firstly, the stamping process including gravity deflection, bead calibration, binder wrap, forming and spring back, are analyzed by the computer simulation. The results of simulation shows good correspondance with those of test trial under the same conditions. The variables of parametric study which will be investigated in the simulation and test trials, are determined form the results of the first run. The formability under the various conditions is evaluated, which are the initial postion of blank, blank holding force, corner radius and the shape of drawbead. Finally, well controled sound product without fracture, wrinkling and excessive weldline movement is obtained.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.529-536
• /
• 2015

Various R&D programs for rocket-based combined cycle (RBCC) engines have progressed worldwide for the space development and the defense applications. As a way toward indigenous domestic RBCC program, a preliminary design of flight test conditions was studied in this study for a sub-scale RBCC engine using a sounding rocket. Launch and flight profiles were calculated for several booster options and compared with that of HyShot II program. The result shows that the Korea Sounding Rocket-II (KSR-II) is a proper candidate to perform the flight test available in Korea. The recommend flight test conditions with KSR-II are Mach 6.0 with a test vehicle of 230 kg and Mach 7.4 with 50 kg. Present study will soon be followed by a design of sub-scale RBCC for a flight test using a sounding rocket.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.690-692
• /
• 2005

Among many other alternative energy resources, small scale hydropower has been brought into attention as a reliable source of energy today, which had been relatively neglected since 1960s. Present low head of Francis turbines and small scale hydro turbines, however, have limitations in the minimum required head and flow rate for efficient operation. This study attempts to develope the Francis turbine which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could be alleviated and competition with other alternative energy sources in the changable design conditions could be attained. The Francis turbine of a new concept was designed based on changable design conditions, hydrodynamics and theory of power transmission.