• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.317-322
• /
• 1994

The design and performance verification of collocated capacitance sensor system for magnetic bearing is presented. Noncollocation between actuators and sensors may cause unstable rotor behavior. The capacitance sensor is not affected by magnetic field. PCB type capacitance sensor is installed between magnetic bearing polse. so, collocation of sensors and actuators can be achieved. Experiment of sensor's static and dynamic charactistics is conducted. Modeling of the rotor system supported by magnetic bearing is made. And performance comparison between simulation and experiment is showed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.32-38
• /
• 1998

In order to investigate the relationship between the stiffness and structure of the automotive roof panels, two kinds of glass fiber reinforced plastic(GFRP) roof panels without and with insert material were fabricated by resin transfer molding(RTM) method. The stiffness test was performed at the same condition as it of actual driving. The structural design and material selection for improving the recyclability of GFRP roof panels were also covered.

• Journal of the Korea Safety Management & Science
• /
• v.1 no.1
• /
• pp.29-39
• /
• 1999

Human sensibility ergonomics is the technique that qualities man's sensibility, measures and evaluates it Quantitatively and makes man's life comfortable, safe and delightful by applying it to products or environmental projects. This study consider the sensibility factor of Sasang constitutional medicine, five elemental properties, and Biorhythm in terms of human sensibility ergonomics. And this study measure reaction-time dependent on a temperament or a state and evaluate the differences of reaction-times objectively with the comparison and analysis using the ANOVA. We can harness it for job design.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.6
• /
• pp.1020-1026
• /
• 1994

This paper presents a technique to optimize the shape of waveguide components in H-plane. The technique utilizes the numerical optimization process which employs the vector finite element method. In the optimization process, the sensitivity of an objective function with respect to design variables is computed by introducting adjoint variables, which makes the computation easy. The steepest descent method is then employed to update design variables. As a numerical example, an H-plane waveguide teejunction was considered to obtain optimized shape. Comparison between the initial and optimized shape was made.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.455-456
• /
• 2016

본 연구에서는 중국의 대표적 해양관광도시인 삼아(三亞), 위해(威海), 청도(靑島)와, 이와 유사한 환경인 한국의 부산, 동해, 제주의 도시아이덴티티(C.I) 시스템을 비교 검토하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.769-772
• /
• 2016

In this paper, the overhang structure was applied to the axial flux permanent magnet (AFPM) motor. This paper describes the overhang effect in the AFPM motor. Moreover, the overhang effect was analyzed according to the different overhang length and an optimal overhang structure was proposed. Finally, the proposed structure was applied to design, analysis and experiment of prototype motors. Through the comparison between 3D finite element analysis results and experimental ones, the validity of proposed structure is clarified.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.10a
• /
• pp.7-10
• /
• 1984

In this paper, the advantages of buffer insertion access method in comparison with other access methods to local area networks are analyzed. Sending and Receiving protocols in a data link layer are designed by a software method, We have derived both qeueing delays and the response time for the performance model that is proposed in this paper, and using the computer simulation, analyzed the performance for the proposed model in terms of the throughput rate- response time characteristrics. Based on the proposed model, the hardware design is implemented.

• Journal of Industrial Technology
• /
• v.9
• /
• pp.101-107
• /
• 1989

The magnetic forming system must be able to store very important electric energy, several tens kilojoules, and flow this energy through the forming coil within some hundreds microseconds. So several hundreds kiloamperes of current can flow through the branch conductor. For the good performance of this type of machine, internal impedance must be minimized. By the computation of distribution of current inside the conductors using integral equation method, we can obtain the inductance and resistance of some dispositions of branch conductors and by comparison obtain some principles for the design of branch conductors in the high power magnetic pulse generator.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1193-1195
• /
• 1996

For an automatic steering problem of vehicles, the main task is to keep a reference path with assumption that the displacement from the guideline can be measured by a sensor. In this paper, a sliding mode fuzzy logic controller design method is introduced and it shows highly enhanced performance in comparison with the other results. The method can be relatively simply implemented.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.708-710
• /
• 2003

This paper presents design sensitivity analysis for the electromagnetic force and torque obtained from Coulomb's virtual work method using the adjoint variable method. And virtual displacement field is calculated from a static structural analysis. Derived equations are verified by comparison with finite different method. And topology optimization for a c-core is given as a verification example.