• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1759-1764
• /
• 2012

This paper describes FPGA design and realization using the shading correction algorithm for a CCD scan image enhancement. The shading algorithm is used by LUT (Look-up Table). The image enhancement results from that the histogram minimum value and maximum with respect to all pixels of the CCD image should be extracted, and the shading LUT is constructed to keep constant histogram with offset data. The output of sensor be converted to corrected LUT image in preprocessing, and the converting system is realized by FPGA to be enabled to operate in real time. The result of the experimentation for the proposed system is showed to take the scanning time 2.4ms below. The system is presented to be based on a low speed processor system to scan enhanced images in real time and be guaranteed to be low cost.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.1-12
• /
• 1997

The acousto-optical spectrometer as a new type backend of the receiver system for radio astronomical observations is manufactured for radio signal analysis. We studied on the effect of Acousto-Optic and Acousto-Optic devices and designed the optics system. We manufactured the optical mount and the CCD detector for deflected beam and interface card. This acousto-optical spectrometer consisted of a laser, optics, acousto-optic deflector, CCD detector and Interface card. This system use He-Ne laser as a light source and use optics to get parallel beam and to focus the deflected beam. Acousto-optic deflector converts IF signal to ultrasonic wave and deflect the laser beam according to the Bragg deflection. The ultra wide band acousto-optic deflector has 1 GHz bandwidth and a total of 2,048 channel Charge Coupled Device for signal detection. In this study, we discuss the theoretical description on the effect of Acousto-optics, the design of the optics, manufacture of optical mount, CCD detector, interface card and we presented the results of experiment. As a result of measurement, we have 1,000 channels bandwidth from CCD channels.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.35-43
• /
• 2001

As the demands for lightweight construction and precision grow, there is an increasing interest on hydroforming technology. This paper deals with designing automobile subframe for applying welded blanks hydroforming. In applying welded blanks hydroforming to automobile subframe, it is a serious problem that blanks wrinkle in deformed shape. To suppress wrinklings in blanks, the sections of the die where blanks wrinkled is modified. In addition to this, it is intended that the sum of thickness variation about wrinkling regions be minimized. For this purpose, parameters for influencing formability are selected and evaluated using orthogonal array. Among these parameters, parameters having a major effect on formability are selected again. Using CCD(central composite design) with the selected parameters, response surface is build up and optimal design is performed.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.523-535
• /
• 2019

Purpose: We research on the efficient response surface methodology(RSM) design to develop a design space in Quality by Design(QbD). We propose practical designs for the successful construction of the design space in QbD by allowing different number of replicates at the box points, star points, and the center point in the rotatable central composite design(CCD). Methods: The fraction of design space(FDS) plot is used to compare designs efficiency. The FDS plot shows the fraction of the design space over which the relative standard error of predicted mean response lies below a given value. We search for practical designs whose minimal half-width of the tolerance interval per a standard deviation is less than 4.5 at 0.8 fraction of the design space. Results: The practical designs for the number of factors between two and five are listed. One of the designs in the list could be chosen depending on the experimental budget restriction. Conclusion: The designs with box points replications are more efficient than those with the star points replication. The sequential method to establish a design space is illustrated with the simulated data based on the two examples in RSM.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.60-73
• /
• 1989

Two field experiments were carried out to assess the applicability of a central composite design (CCD) in determining optimum culture condition of an early rice cultivar, Unbongbyeo in southern Korea. A central composite design with two replicates was applied to five levels of five factors such as the number of hills per 3.3m2, the number of seedlings per hill, the levels of nitrogen, the transplanting date and the seedling age (Experiment 1). The levels of planting density were ranged from 30 hills to 150 hills per 3.3m2 ; the number of seedlings per hill from 1 seedling to 9 seedlings per hill; the levels of nitrogen application from 1 kg/l0a to 21 kg/l0a; the transplanting date from June 15 to July 5; the seedling age from 25 days to 45 days. A fractional factorial design was applied to three levels of five factors tested in CCD (Experiment 2). Yield per hill and per unit area were examined and the results obtained from both experiments were compared. The benefits from the central composite design were discussed. Maximum yield of brown rice per unit area was obtained at the combination of the central levels of one of five factors when the other four factors were fixed at central point. Furthermore, brown rice yield per unit area affected by interaction of two factors was maximized at the central point when the remain three factors being fixed at the central level. The responses of five factors to brown rice yield per hill and unit area were found to be a saddle point in both designs. Actual values of the stationary points were 107 hills per 3.3 m2, 4 seedlings per hill, 10 kg nitrogen per l0a, transplanting date of rice on June 26 and 33 days of seedling age in the central composite design. Brown rice yield per unit area at the stationary points were estimated 439 kg/l0a in the central composite design and 442 kg/l0a in the fractional factorial design. Considering the number of experimental treatment combinations, the central composite design was rather convenient in reducing the number of treatment combinations for similar information. It was more convenient for an experimenter to present the results from the central composite design than those from the fractional factorial design. Considering the optimum yields of brown rice per unit area at the stationary points being verified as saddle points in both designs. inter-heterogeneity of each of the factors should be avoided in setting up factors in pursuit of inducing unidirectional response of the factors to yield. Even though both the lower and higher levels in the central composite design being beyond the region of an experimenter's interest. they were considered highly valued in interpretation of the results. Conclusively. the central composite design was found to be more beneficial to optimize culture condition of paddy rice even with several levels of various factors were involved.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.2
• /
• pp.65-69
• /
• 1998

본 연구는 전하 결합 영양소자에서 감지회로의 특성을 향상시키기 위하여 N형 MOSFET과 Polysilcon 저항에 의한 전압 분배 회로를 가진 감지회로를 설계하였다. 감지회 로에 흐르는 전류는 전압분배회로를 N형 MOSFET으로 설계하였을때가 Polysilicon 저항으 로 설계한 경우보다 감도 특성도 좋은 것으로 나타났다. 이는 전압분배회로를 Polysilicon으 로 설계한 경우보다 N형 MOSFET으로 설계하였을 때 동작 주파수가 높을수록 전압이득 특성이 우수하기 때문이다. 감지회로에 흐르는 전류는 전압분배회로를 N형 MOSFET으로 설계하였을 때 2mA 정도를 나타내고 polysilcon으로 설계하였을 때 4mAwjd도로 나타났다.

• Korean Journal of Optics and Photonics
• /
• v.6 no.1
• /
• pp.8-15
• /
• 1995

복사기. 팩스 렌즈 등 대향생산되는 광학계를 실시간에 성능평가하기 위하여 5개의 십자형 슬릿 물체와 3개의 2차원 CCD를 상분석장치로 사용한 자동평가장치를 개발하였다. 시험렌즈의 사양에 따라 물체와 렌즈, 그리고 상분석장치를 이동시키는 자동정렬장치를 제작하였으며 슬릿의 수직 및 수평방향 선분포 함수를 CCD에 의햐여 동시에 측정하였다. 그리고 렌즈의 축상 및 비축상 MTF와 배율, 편심, 그리고 회전위치에 따른 최적방향 등을 자동으로 실시간에 측정할 수 있었다.

• Bulletin of the Korean Space Science Society
• /
• 1994.04a
• /
• pp.30-30
• /
• 1994

No Abstract. See Full-text

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.48-55
• /
• 1999

This paper describes automatic gain control circuit (AGC) design techniques for CMOS CCD camera interface systems. The required gain of the AGC in the proposed system is controlled directly by digital bits without conventional extra D/A converters and the signal settling behavior is almost independent of AGC gain variation at video speeds. A capacitor-segment combination technique to obtain large capacitance values considerably improves the effective bandwidth of the AGC based on switched-capacitor techniques. A proposed layout scheme for capacitor implementation shows AGC matching accuracy better than 0.1 %. The outputs from the AGC are transferred to a 10b A/D converter integrated on the same chip. The proposed AGC is implemented as a sub-block of a CCD camera interface system using a 0.5 um n-well CMOS process. The prototype shows the 32-dB AGC dynamic range in 1/8-dB steps with 173 mW at 3 V and 25 MHz.

• Spatial Information Research
• /
• v.10 no.3
• /
• pp.407-419
• /
• 2002

In this study, the design of 4S-Van system is discussed fur the implementation of laser mapping system. Laser device is fast and accurate sensor that acquires 3D road and surface data. The orientation laser sensor is determined by loosely coupled (D)GPS/INS Integration. Considering current system architecture, (D)GPS/INS integration is performed far performance analysis of direct georeferencing and self-calibration is performed for interior and exterior orientation and displacement. We utilized 3 laser sensors for compensation and performance improvement. 3D surface data from laser scanner and texture image from CCD camera can be used to implement 3D visualization.