• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3779-3784
• /
• 2014

Aims: To study alterations of plasma lipid profiles in carcinoma cervix and to assess significance comparedwith controls in different histological grades and stages. Materials and Methods: Totals of 99 histopathologically diagnosed cases and 35 controls from a tertiary hospital situated in the southern part of India which caters the rural and semi-urban populations were considered for the study. Fasting blood samples were taken to analyze total cholesterol (TC), triglycerides (TG), high density lipoprotein cholesterol (HDL-C) and low density lipoproteins cholesterol (LDL-C), for comparison of cases, grouped according to histological grades and stages, and controls. One way ANOVA was used for multiple group comparisons and the Student's t test (unpaired) for group wise comparisons. For all tests a 'p' value of 0.05 or less was considered as significant. Results: Out of 99 cases, most (n-39) were seen in the 40-49 year age group followed by 60-69 years (n-22). Serum TG significantly differed between cases and controls but without any relation to differentiation grade. The lipid profile parameters in various grades of cervical cancer were not statistically significant. Statistically significant increase of TC and LDL-C values was observed with increase in stage of the disease. Conclusions: The study showed TG is elevated in cervical cancer, and that TC and LDL-C are proportional to the spread of cancer as it increases from stage I to stage IV. An in-depth study of molecular changes in lipid metabolism in cervical cancer patients, enzymes/genes responsible and alterations in LDL receptors is necessary to provide information to decide whether the lipid profile has any diagnostic/prognostic role in cervical cancer.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.215-220
• /
• 2017

This study was conducted to improve the insufficiency of fruit vegetable grafting system developed by National Institute of Agricultural Sciences, Rural Development Administration. When the rotary blade cut the stem of scions and rootstocks, the grafting failure at curved cutting surfaces happened. The cutting depth of a tomato seedling by a rotated cutter was calculated 0.11 mm even when the cutting arm length and the maximum stem diameter were 50 mm and 5 mm, respectively. Mathematical analysis and high-speed photography showed that there was no problem by cutting in straight the stem of scions and rootstocks. The compression test of seedling stems to design the optimal shape of gripper showed that stems were not completely restored when they were compressed above 0.8 mm and 0.6 mm in case of rootstocks and scion, respectively. This study found that the bending angle of stem of tomato seedlings at the grafting period was 10 degree on average. The optimal gripper finger was the edge finger type which could be precisely set center point by adjusting the distance between fingers. In addition, it was found that most of seedling could be grasped without damage when the finger-to-finger distances is set to 2.5 mm for scion and 3.0 mm for rootstocks and finger are coated by 1 mm-thick flexible material.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.6
• /
• pp.623-641
• /
• 2020

About 5 km length of tunnels were constructed by mechanized tunnelling method using closed type shield TBM. In order to avoid construction delay problems for ensuring timely electricity transmission, it is necessary to increase the prediction accuracy of the excavation process involving machines according to rock mass types. This is important to corroborate the project duration and optimum operation for various considerations involved in the machine. So, full-scale tunnelling tests were performed for developing the advance rate model to be appropriately used for 3.6 m diameter shield TBM. About 100 test cases were established and performed using various operational parameters such as thrust force and rotational speed of cuttterhead in representative uniaxial compressive strengths. Accordingly, relationships between normal force and penetration depth and, between UCS and torque were suggested which consider UCS and thrust force conditions according to weathered, soft, hard rocks. Capacity analysis of cutterhead was performed and optimum operational conditions were also suggested based on the developed model. Based on this study, it can be expected that the project construction duration can be reduced and users can benefit from the provision of earlier service.

• Women's Health Nursing
• /
• v.3 no.2
• /
• pp.129-156
• /
• 1997

The purpose of this study is to investigate the relationship between depression and ego identity of middle-aged women and to identify the variables that show differences in the depression and ego identity of middle-aged women. The subjects in the study were 321 mothers of high school students whose age were 40-59 years old. The instruments for this study were Beck Depression Inventory(BDI) developed Beck(1978) and translated by Lee(1981) and Ego identity Scale developed Suh(1975) and modified by Nam(1975). The reliability values of BDI range from 0.83 to 0.87 and Ego identity range from 0.81 to 0.85 using Cronbach alpha. The data were analysed by using the SAS program and included Frequency, percentage Pearson Correlation MANOVA, t-test, ANOVA. The conclusion obtained from this study were as follows ; 1) There was a negative correlation(r=-0.21, p=0.0002) between depression and ego identity of middle-aged women. Thus the lower depression the higher ego identity for middle-aged women. 2) According to the analysis of interacting effects of depression and ego identity, there were significant differences in the household income(F=0.38, p=0.0035), level of education (F=6.50, p=0.0001), satisfaction of marriage(F=10.45, p=0.0001), family pattern (F=6.18, p=0.0001), menopausal status(F=7.23, p=0.0001), present disease(F=4.85, p=0.0110) and health status(F=9.00, p=0.0001). 3) There were significant differences on the level of education(F=12.98, p=0.0001) household income(F=5.78, p=0.0007), support of spouse(F=8.58, p=0.0002), satisfaction of marriage(F=20.08, p=0.0001), menopausal status(F=11.32, p=0.0001), present disease(t=2.76, p=0.0062) and health status(F=17.23, p=0.0001) of the depression of middle-aged women. 4) There were significant differences on the patterns of household(t=-2.64, p=0.0086), support spouse(F=3.58, p=0.0291), satisfaction of marriage(F=3.90, p=0.0212), menopausal status(F=4.59, p=0.0108) and disease(t=2.11, p=0.0359) of the ego identity of middle-aged women. On the basis of the above findings the following recommendations are made ; 1) According to results of this study, middle-aged women's depression is correlated with ego identity. Thus when the nurse plans the preventive strategy of middle-aged women's depression, the nurse must be considered with level of ego identity. 2) To study for middle-aged women in depth, further research is need to study regard to middle-aged men and their children.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.871-876
• /
• 2020

Understanding the wave characteristics near the outlet of coastal power plants for cooling water in the vicinity of the dredged areas is critically important for the construction and operation of the plants. By Employing the eigenfunction expansion method, in this study, we analyzed the reflection of monochromatic water waves over (1) shear currents near the outlet and (2) multi-arrayed trenches representing dredged areas. We firstly optimized the number of grids expressing shear currents and the number of evanescent modes based on a convergence test. We then analyzed the sensitivity of the reflection coefficients depending on (1) magnitude of shear currents, (2) width of shear currents, (3) a distance between adjacent trenches, and (4) a number of trenches. The results showed that the reflection coefficient was more sensitive to the number of trenches and the distance between trenches than the velocity of shear currents and the width of shear currents. We also found that even the effect of shear currents is relatively small, the effect is not negligible in a relative water depth from shallow to near shallow water waves (0.01 < kh ≦ 0.70).

• Korean Journal of Oriental Medicine
• /
• v.14 no.2
• /
• pp.107-112
• /
• 2008

Although the pulse diagnosis position, Guan is apart from Cun or Chi by only $10{\sim}20$ mm at most, traditional medical doctors applies different indent pressures and even they states different pulse images are felt at Cun, Guan and Chi, To support their clinical behaviors, in this study, we tested statistically whether there are differences in pulse waveform measured at these three positions with SphygmoCor system used world widely, A 30 years old female subject without any evidence of cardiovascular diseases was involved in this experiment. Radial pulse waves were recorded at three different positions on left lower arm 10 times at three positions-Cun, Guan and Chi. With ANOVA, we tested whether, among three different positions. there are any differences in 12 parameters of radial pulse waveform and in estimated AIx(Augmentation Index) as an arterial stiffness index extracted from radial pulse waveform. As results, differences in optimal indent pressure h0 were observed at different measuring positions(P<0.001) but not significantly different. And pulse pressure his were found to be different(Chi$22.60{\pm}3.06%,\;18.60{\pm}3.37%\;and\;26.4{\pm}5.02%$ respectively. Consequently. AIx at Gwan seems to be lowest and that at Chi seems to be highest. So. we assert the AIx at Chi is likely to be overestimated. In further studies. we want to examine what make differences in these parameters between measuring positions. And it also seems to be worthy to investigate the relationship between the depth of radial artery and AIx. And, ultimately, we need to determine the best measuring process including measuring position, hold-down pressure, signal quality validation and so on. so to achieve the optimal waveform which represents subject's health condition for both western medicine and traditional medicine.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.3 s.26
• /
• pp.23-34
• /
• 2003

Currently, the efficiency of GPS has been increased in the various precise survey like as the control survey and the navigation etc. Also, it is widely used in the deformation analysis of the structure, the measurement of the marine tides, the measurement of the river level and the topographic monitoring of seabed or riverbed by combined the measurement equipment for depth. In this study, we intend to increase in efficiency of the topographic monitoring of seabed or riverbed by combined with DGPS, RTK GPS and echo sounder. For this study, we defined the error correction of the echo sounder with the experiment of water tank which is considered the characteristic of estuary riverbed and then we developed the s/w for 3-dimensional monitoring of estuary riverbed and applied the s/w to field test and improved the various problems. On analyzing topography of estuary riverbed by combined GPS with echo sounder, the draught error which is yielded to change of length from the water surface by the movement of survey vessel to the end of the transducer was eliminated by geometrical rearrangement and we defined the correction formula $z=BM+SAH-DBR_{(i)}-DRT-ED$. The sounding error about the echo sounder and characteristic of estuary riverbed was found by understanding the relation of average diameter ind residual error and we defined correction formula, $Y=0.00474{\ast}ln(X)-0.0045$ by the regression analysis. and then we verified applicability of correction formula.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.345-356
• /
• 2011

To remove metal stains of the ceramics, chemical cleaning is essential case by case. This study investigated the removal characteristics of iron stains by oxalic acid and citric acid including their application methods of soaking and poultice. The soaking method in cleaning agents showed removal process by color difference and released iron contents from iron stains on ceramics. Iron stains were removed successfully from ceramics, which soaked in oxalic acid for 60 hours. However, it is recommendable to soak in 0.25M oxalic acid for one to three hours because most iron stains were disappeared in 3 hours soaking. Citric acid is less effective than oxalic acid in removing iron stains because of heavy molecular weight and low acidity. Poultices (bentonite, sepiolite, activated carbon fiber and celite) with oxalic acid were applied on contaminated ceramics. After ten hours, iron stains on ceramics were removed successfully by poultice. Among them, bentonite and sepiolite have better application. Therefore, sepiolite with 0.25M oxalic acid was applied on the iron stains of whiteware and celadon from Ma Island, and then stains were removed. However, it is judged that the application methods can be varied according to the form and depth of contaminant. In addition, the residues of poultice on the ceramics will be considered for preventing contamination.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.565-572
• /
• 2009

In this study, corrosion resistance of palm oil fuel ash (POFA) concrete as a blended concrete is evaluated by using electrochemical technique. The POFA is an industrial byproduct obtained from fuel ash after extracting palm oil from palm-tree. In order to obtain basic material characteristics of the POFA concrete, tests on compressive strength, slump, weight loss, bleeding and expansion ratio were carried out the early-aged POFA concrete. On the other hand, durability characteristics, both chloride penetration and carbonation depth test, were also conducted. Finally, corrosion resistance were evaluated by applying electro-chemical artificial crack healing technique, and the tests on the impressed voltage characteristic, galvanic current and linear polarization resistance. From the experimental results, it was found that long-term strength, bleeding, lower slump ratio, expansion ratio, chloride penetration, carbonation and corrosion resistance were improved by using the POFA due to activated pozzolanic reaction. It can be also mentioned that POFA concrete has a potential to be used as a cementitious binder for green-recycling resources.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.675-684
• /
• 2010

The reinforced concrete members are designed to fail in flexural to lead ductile fracture. In the building structures, the failure is typically imposed on beams to prevent damages in columns. However, progression of plastic collapse mechanism may ultimately develop, a plastic hinge at the bottem end of the first floor column, which then can be subjected to shear or bond finally due to large axial force and small shear span-to-depth ratio. In this study, 10 RC column specimens failed in shear after flexural yielding was investigated to determine the factors affecting the plastic hinge length. The findings of this study showed that the most effective factor affecting the plastic hinge length was an axial force. As an axial force increase, an axial strain and a ductility ratio were decreased obviously. The test also shows the observed plastic hinge length was about 0.8~1.2d and the this result has difference compared with forward research.