• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1631-1638
• /
• 2013

포장파손과 IRI 등의 요소들은 포장상태를 평가하는 중요한 요소이다. 최근 들어 주행쾌적성에 영향을 주는 타이어-노면소음을 포장관리 시스템에 포함시키는 필요성이 대두되고 있다. PLP(Portable Laser Profiler)를 이용하여 주행 중 노면조직특성인 평균프로파일깊이(MPD)를 측정할 수 있는 기법이 개발되었다. 일반적으로 타이어-노면소음은 노면조직특성에 따라 다르게 발생하며, 타이어-노면소음을 예측하는 유용한 정보로 사용할 수 있다. 본 연구에서는 아스팔트 구간의 노면조직특성에 따른 타이어-노면소음을 평가하기 위해 다수의 아스팔트 구간에서 MPD와 타이어-노면소음을 동시에 측정하여 데이터를 획득하였으며, 통계학적 분석을 통해 타이어-노면소음 추정식을 제안하였다.

• 치과방사선
• /
• 제3권1호
• /
• pp.29-34
• /
• 1973

The study was made on the facial profile of the normal Korean adults using the roentgenographic cephalograms. The subjects ccnsisted of 50 males and 50 females with the normal occlusion. The measurements were made of the facial angles in skeletal pattern and depth, height and the length in the soft tissue profile. The mean and standard deviations from the subjects were calculated and compared with the samples of male and female. The authors have drawn the conclusions as follows: 1. Compared with the angulation in skeletal patterns, there were no differences between both sexes. 2. Individual variations of the lower face were larger than the upper face in most measuring points. 3. Generally, facial heights were lesser than facial depth in sexual differences. 4. Most dimensions of the facial depth, height and length of the male were larger than those of female.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.471-476
• /
• 2001

The main object of this study is to develop a reliable FEM simulation technique for stability test using ABAQUS software and to clarify the effect of base profile of a steel D&I(drawn and ironed) can on the dome reversal pressure. For the can after body making simulation, two kind of stability test, dome buckle test and axial crush test are performed. The factors studied in the base profile on the dome reversal pressure are the base diameter, the rim radius, the dome shoulder radius, the dome radius and the dome depth. Within the limits before the occurrence of normal snap-through buckling of dome, the dome reversal pressure is improved by decreasing the base diameter, increasing the dome depth or increasing the dome shoulder depth.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.72-75
• /
• 1994

In this paper, a novel method to figure out the relative residual stress distribution along the depth of silicon diaphragms is presented Cantilevers with various thickness are fabricated by the time controlled etching method using EPW as an etchant. The boron concentration along the depth of the cantilevers is obtained by the TSUPREM IV simulation, and the etching time to get the proper thickness is calculated. By measuring deflections of the p+ silicon cantilevers the stress profile along the depth of diaphragm is calculated. The obtained stress profile is reasonable and useful to expect the deflection of cantilevers and the buckling of diaphragms.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.9-14
• /
• 2012

본 논문에서는 경량 프로파일러를 이용한 프로파일을 측정하여 매크로 텍스쳐 크기를 산정하고 분석하였다. 밀입도, 배수성, SMA, 기층 포장에 대한 프로파일을 측정하여 포장에 사용된 골재에 의한 매크로 텍스쳐 크기를 분석하였으며, 재료분리가 일어난 지역의 프로파일을 측정하여 매크로 텍스쳐 깊이를 분석하였다. 본 연구 결과 프로파일 분석을 통하여 효과적으로 매크로 텍스쳐 크기를 산정할 수 있었으며, 아스팔트 혼합물 종류별로 텍스쳐 크기를 분석할 수 있었다. 또한, 매크로 텍스쳐 크기를 산정하여 분석함으로써 재료분리가 일어난 지역을 탐지할 수 있었다.

• 치과방사선
• /
• 제1권1호
• /
• pp.29-37
• /
• 1971

Modern orthodontics implies not only occlusal excellence, but also the positioning of teeth to produce optimal facial harmony for the individual patients. Several methods have been used in the study of facial height, width and depth were made from living subjects. These methods, however, complicate to control the subjects, therefore many investigators have used profile cephalometric technics. Practically, cephalometric technics were used m orthodontic treatment, maxillo-facial surgery and anthropometric studies. Author was studied to investigate the normal standards of soft tissue profile in Korean adolescences. The subjects consisted of 53 males and 54 females from 17 to 22 years of age and with normal occlusion and acceptable profile. Aluminum filter was designed to obtain both hard and soft tissue structures on a single film. Eight profile landmarks were plotted and drawn on the tracings of all cephalograms and eighteen depth, height and angles were measured from each landmarks of the cephalograms. The following conclusIOns were obtained from this studies; 1. Total facial convexity was 170. 75 in males and females samples and lower facial and: labiomandibular convexity were each of 141.44, 171.05. 2. Maxillary and mandibular sulcus angulations were 137.61, 129.52 and upper and lower lip inclinations were each of 123.26 and 49.56 in male and females. 3. Soft tissue depth of several points were as follows; Subnasale 18.74㎜ in males and 16.65㎜ in females Pogonion 13.40㎜ in males and 13.07㎜ in females upper lip 14.06㎜ in males and 11.91㎜ in females . lower lip 15.46㎜, 13.63㎜ in males and females 4. The protrusion of nose were 16.28㎜ in males and 15.56㎜ in females 5. The vertical length of upper and lower lips were 25.67㎜, 52.96㎜ and the lip posture was indicated 93.43 per cent (closed state) in centric occlusions.

• 분석과학
• /
• 제10권5호
• /
• pp.357-361
• /
• 1997

Griemm 형태의 글로우방전셀을 상업용 사중극자 ICP-MS에 장착시켜 다층박막의 표면 분석을 시도하였다. 지름이 2.0mm인 양극과 적절한 실험 최적 조건을 사용한 결과 ${\mu}m$ 두께의 여러층들을 30여 분 이내에 분석할 수 있었다. Cu-Ni 및 Fe-Ni의 다층막을 GDMS로 분석한 결과 10nm정도의 분해능이 가능하였으며, 이는 바닥이 평평한 crater를 얻을 수 있는 실험조건에서 측정하였기 때문이다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권3호
• /
• pp.201-207
• /
• 2018

The purpose of this study is to evaluate the performance of a "stealth chamber" as a novel reference chamber for measuring percentage depth dose (PDD) and profile of 6, 8 and 10 MV photon energies. The PDD curves and dose profiles with fields ranging from $3{\times}3$ to $25{\times}25cm^2$ were acquired from measurements by using the stealth chamber and CC 13 chamber as reference chamber. All measurements were performed with Varian VitalBeam linear accelerator. In order to assess the performance of stealth chamber, PDD curves and profiles measured with stealth chamber were compared with measurement data using CC13 chamber. For PPDs measured with both chambers, the dosimetric parameters such as $d_{max}$ (depth of maximum dose), $D_{50}$ (PDD at 50 mm depth), and $D_{100}$ (PDD at 100 mm depth) were analyzed. Moreover, root mean square error (RMSE) values for profiles at $d_{max}$ and 100 mm depth were evaluated. The measured PDDs and profiles between the stealth chamber and CC13 chamber as reference detector had almost comparable. For PDDs, the evaluated dosimetric parameters were observed small difference (<1%) for all energies and field sizes, except for $d_{max}$ less than 2 mm. In addition, the difference of RMSEs for profiles at $d_{max}$ and 100 mm depth was similar for both chambers. This study confirmed that the use of stealth chamber for measuring commission beam data is a feasible as reference chamber for fields ranging from $3{\times}3$ to $20{\times}20cm^2$. Furthermore, it has an advantage with respect to measurement of the small fields (less than $3{\times}3cm^2$ field) although not performed in this study.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.58-64
• /
• 1984

이온주입형 E-IGFET에서 이온주입층내 불순물 profile을 임의의 형태로 가정하였으며, 가정한 불순물 profile을 이용하여 threshold 전압에 대한 간단한 model을 유도하였다. 유도한 model을 이용하여 Gaus-sian-profile일 때의 threshold 전압치를 구하였고, 실제의 측정 data와 비교하였을 때 일치함을 확인할 수 있었다. 더불어, box-profile일 때의 threshold 전압치의 오차를 계산해 보았다. 또한, substrate-bias에 의한 threshold 전압의 변화를 simulation하였으며. 계산과정에서 이온주입층의 깊이 D를 구하는 새로운 방법을 제시하였다.

• 소성∙가공
• /
• 제28권4호
• /
• pp.183-189
• /
• 2019

Cylindrical worm reducers are generally used in various fields and forms throughout the industry, and demand is increasing due to their role as an integral part of the industry. Market trends require high-load, high-precision components, and small-sized reducers with large loads. When using a cylindrical worm reducer, a reducer designed with a reduced center distance while maintaining the same output torque results in gear wear. To overcome this difficulty, an enveloping worm gear reducer is introduced and studied. In this paper, three types of end mill tools are used to evaluate the tooth profile accuracy for each tool shape during machining of the tooth profile for a non-developed surface worm thread. The effect of the endmill shape on the accuracy of the tooth profile was analyzed by performing 3D modeling of the surrounding worm tooth profile based on the Hindley method. In this study, we analyzed tooth profile accuracy, tooth surface roughness, and tooth surface machining time, etc. Through the study, efficient machining conditions for the enveloping worm gears and the influence of parameters on the process were presented.