• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.692-696
• /
• 2017

The shape of press components is becoming increasingly complex due to customer demands, process shortening and cost savings. In addition, the stability of the pressing process frequently varies during mass production due to the influence of many factors. In order to ensure the process stability, it is necessary to establish a process in which reproducibility is realized in tolerance, which is sufficient for advance study of shape, material, press, mold and lubrication. However, unforeseen changes in process parameters cause disruptions in production line shutdowns and production planning. In this paper, we introduce a method to monitor a real time process by applying a sensor to a press mold. A non-contact type sensor for measuring the flow of a sheet material and an example of an experiment using the optical sensor which is highly applicable to mass production are presented. An optical sensor was installed in a cylindrical drawing mold to test its potential application while changing the material, blank holder force, and drawing ratio. We also quantitatively determined that the flow of other sheet materials was quantified locally using a square drawing die and that the measured value was always smaller than the drawing depth due to the material elongation. Finally, we propose a field that can be used by attaching the sensor to the press mold. We hope that the consequent cost reduction will contribute to increasing global mold competitiveness.

• Journal of Korea Water Resources Association
• /
• v.43 no.9
• /
• pp.801-811
• /
• 2010

A three-dimensional numerical model called NEWTANK is employed to investigate solitary wave run-up with an internal wave-maker on a steep slope. The numerical model solves the spatially averaged Navier-Stokes equations for two-phase flows. The LES (large-eddy-simulation) approach is adopted to model the turbulence effect by using the Smagorinsky SGS (sub-grid scale) closure model. A two-step projection method is adopted in numerical solutions, aided by the Bi-CGSTAB (Bi-Conjugate Gradient Stabilized) method to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate VOF (volume-of-fluid) method is used to track the distorted and broken free surface. A solitary wave is first internally generated and propagated over a constant water depth in the three-dimensional domain. Numerically predicted results are compared with analytical solutions and numerical errors are analyzed in detail. The model is then applied to study solitary wave run-up on a steep slope and the obtained results are compared with available laboratory measurements.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.3
• /
• pp.133-137
• /
• 2004

Recently, saw dust manure has been widely used in horticultural crop production in Korea. Animal manure is produced by decaying of livestock manure mixed with saw dust, and contained higher nutrients and ion concentration than the traditional manure made from rice straw and grasses. Therefore, a continuous application of the animal manure disregarding to soil characteristics may be ruined the soil conditions. This study was conducted to investigate the transportation of the nitrogen, phosphate, potassium, and ion concentration of the animal manure applied to volcanic and non-volcanic soils in Jeju islana Soil chemical analysis were done before and 180 days after animal manure application. After animal manure application, $NO_3$-N moved up to 90cm in volcanic soil, while the movement was limited to 60 cm in non-volcanic soil. Phosphate concentration was high up to 30 cm, where crop roots are mainly distributed, in volcanic soil, however, the phosphate moved up to 60 cm in volcanic soil. Exchangeable potassium moved up to 90 cm in volcanic soil, but the movement wns limited up to 60 cm in non-volcanic soil. For both soil types, no significant different in ion concentrations was observed up to 60 cm in soil depth, though the concentrations were higher in volcanic ash soils as compared to the non-volcanic ash soils.

• Korean Journal of Environmental Biology
• /
• v.18 no.3
• /
• pp.323-330
• /
• 2000

Early life history and spawning for Odontobutis interrupta were observed in the laboratory during May-August 1999 with a condition of natural habitats in the field. Optimal water temperature for spawning was between 17.5 and 22.$0^{\circ}C$ and appropriate water depth and current velocity in the natural habitat ranged 0.3-0.6 m and 0.1-0.3 m/sec, respectively. Ovary maturation index peaked at about 100mm in the total length and their values gradually decreased after the size. Male fishes showed a territory and courtship behavior to adult females and the males frequently pushed upper-ventral part of females for egg releases. After females spawned, the males guarded the egg masses and supplied dissolved oxygen using pectoral fins. According to observation of egg development in the laboratory, blastodisc formed in 1hr 17 min after the fertilization, cleavaging at 36-minute interval regularly. Blastulation occurred in 7 hr 12 min after the fertilization, with gastrulation after 11 hr 11 mins and formation of york plug after 32 hr 48 min. Embryo was formed in 33 hr 45 min after fertilization and optic vesicles appeared in 47 hr 27 mins when 30-31 somites were formed. Cardiac primordium was formed in 65 hr 15mins and its beat averaged 44- 48 time/min. Pectoral fins were formed in 138 hr 40 min, air-bladder and black vesicles were observed in lower portion of young fish. Embryo hatched from she-11 membrane after about 10 days and juvenile was 5.8$\pm$0.2mm in total length 3.0$\pm$0.5mg in weight.

• 한국체육학회지인문사회과학편
• /
• v.55 no.2
• /
• pp.95-110
• /
• 2016

The purpose of this research is to analyze and understand MTB(mountain bike) participants' life in subcultural perspective. This research was completed by 8 people live in Seoul, Gyeonggi and Incheon who regularly participated their activity and changed their job to MTB. Observe them by participation, in-depth interview, field notes and researcher's daily records were methods to collect these data. To accomplish this purpose of study, I chose ethnographic Research. As a result, feeling doubt of their previous life, be caught in unique fun of MTB that made them to think MTB leisure seriously as a job, experience of its professionalism they learnt, and changed their job voluntarily were majority opinions. After they changed their job, they seems to have weisure life, more enthusiastic, got positive attitudes than before. Final conclusion of this report is 'close relationship between MTB facility and day life ' and 'tourism's attraction brought them to change their job. This changes gave them satisfaction to their personal life. In socially, it made a large contribution for development of leisure industry by creating new jobs like MTB tour guide and MTB assemblyman.

• Journal of KIISE:Software and Applications
• /
• v.28 no.7
• /
• pp.501-510
• /
• 2001

Generally, it is essential to estimate exact disparity for the 3D modeling from stereo images. Because existing methods calculate disparities from a whole image, they require too much cimputational time and bring about the mismatching problem. In this article, using the characteristic that the disparity vectors in stereo images are distributed not equally in a whole image but only exist about the background and obhect, we do a wavelet transformation on stereo images and estimate coarse disparity fields from the reduced lowpass field using area-based method at first-step. From these coarse disparity vectors, we generate disparity histogram and then separate object from background area using it. Afterwards, we restore only object area to the original image and estimate dense and accurate disparity by our two-step pixel-based method which does not use pixel brightness but use second gradient. We also extract feature points from the separated object area and estimate depth information by applying disparity vectors and camera parameters. Finally, we generate 3D model using both feature points and their z coordinates. By using our proposed, we can considerably reduce the computation time and estimate the precise disparity through the additional pixel-based method using LOG filter. Furthermore, our proposed foreground/background method can solve the mismatching problem of existing Delaunay triangulation and generate accurate 3D model.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.169-176
• /
• 2005

The farm house structure, ventilation system and manure treatment of two-storey buildings and sawdust pig houses were surveyed and analyzed. Based on the data for ten selected farms in five provinces during eight months, the goal is to eventually establish a standard two-storey pig house. Manure treatments were composting, slurry and activated sludge in two-storey pig houses, while fermentation method was done in sawdust pig house. The depth of sawdust as a litter material were 10 to 60cm, with a duration of 1/2, 1, 3 and 6 months, respectively. The ventilation systems were the mechanical type in two-storey pig houses and natural system in the sawdust pig house. Side wall in the two-storey pig house was enclosed with insulation materials such as block, colored metal sheet and sandwich panels. The minimum ceiling height in the first floor of the two-storey pig house was 2.0m and the maximum was 3.0m. On the second floor, ceiling height ranged from 2.0 to 2.7m. The construction cost in the two-storey systems were $700\~140$, and sidewall curtain systems were $30\~40$ thousand Won/pyung.

• Korean Journal of Environment and Ecology
• /
• v.2 no.1
• /
• pp.19-36
• /
• 1988

To investigate edge vegetation structure and edge species in Chiak Mountain National Park, field survey was executed from July to September, 1988. Canonpy drip-line type, cantilevered type and advancing type of edge vegetation were observed on site. The relative importance values of major species in each crown layer were changed along distance from edge to forest interior differently by aspect and present tree layer vegetation. Especially light-oriented edge species as codominant species were observed in Pinus densiflora forest interior at south slope and moisture - oriented species as codominant species were observed with light-oriented species in north edge beside torrential stream. No. of species and individuals by crown layer, species diversities and dissimilarities were decreased according to the distance from edge to forest interior, and edge depth was estimated as 15-20m. Dominant species of edge in shrub and ground layer were different by altitude and topographic locations; valley, ridge, summit and edge species at summit were not observed at other area. Floristic similarities between edge vegetations at different environments were affected by altitude, aspect and topographic location. Frequency classes of edge species were different by aspect, altitude and topographic location. Weigela subscssilis showed high frequency class in all environment conditions and Quercus mongolica, Lindera obtusiloba, Symplocos chinensis for, pilosa, weigela subscssilis, Fraxinus rhynchophylla, Actinidia arguta, Rubus crategifolius. Pinus densiflora, Aralia elata etc, were observed as edge species at all environmental conditions, respectively.

• Journal of The Korean Association For Science Education
• /
• v.32 no.4
• /
• pp.655-670
• /
• 2012

As a case study on the changes of beginning science-gifted education teachers' teaching professionalism through coteaching, this study deeply investigated the change processes in the aspects of pedagogical content knowledge. We selected two beginning teachers whose teaching careers in secondary science-gifted education were less than five years. The teachers planned, performed, and reflected together their science instructions for secondary science-gifted students during nine class hours over three times. We observed coteaching of science instructions of the teachers, and analyzed the taped videos, the materials, the transcripts for discussions between them and in-depth interviews with them, their reflective journals, and researcher's field notes by using the constant comparative method. This study revealed that the coteaching positively changed the two teachers' practical knowledge about the curriculum for science-gifted education, the instructional strategies for science-gifted education, the assessment in science-gifted education, the science-gifted students, and the science contents although there were some limitations. The results suggest that the coteaching will be useful in improving beginning teachers' teaching professionalism, and provide practical implications in finding the ways to use it effectively in science-gifted education.

• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.57-64
• /
• 2004

There are two major types of underwater blasting at Korea, bridges and harbor construction work. Pier blasting for lay the foundation bridges construction is used dry excavation working (drilling and charging) after pump out water and then fire pump in water that is same as bench blasting. In contrast, underwater blasting for harbor construction and increase of harbor load depth is used to barge with digging equipment that is in oder to drilling on the surface and blasting work(charge, hook-up) under water. Thus, there are need to special concern such as charge method and hook-up method different from tunnel blasting work and bench blasting work. If do not use special concern breaks out dead pressure and mis fire because of there are so many difficult condition such as water pressure, obstruct field of vision. In this study underwater blasting at Busan Harbor Construction have consider with special concern that is plastic pipe charge method used to MegaMITE I and specialized buoy hook- up method make far initial system detonate on the surface used to TLD. The results is designed blast pattern charge per delay effect an inspection of verify between predict velocity and measure velocity. minimized break out mis fire consideration charge method, hook up method. According to result best underwater blasting design is 105mm drilling dia, MeGAMITE II, HiNLL Plus(non electric detonator).