• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.2
• /
• pp.63-67
• /
• 1992

Shallow $p^{+}-n,n^{+}-p$ diodes have been fabricated using rapid thermal diffusion by solid diffusion source and rapid thermal alloying with pure Aluminum. Diode area and junction depth are designed about 2.83$[\times}10^{-3}cm^{2}$ and 250nm, respectively. Electrical characteristics of $p^{+}-n$ diode show that the ideality factor is 1.04 and reverse current density is 29.3nA/$cm^{2}$, respectively. On the other hand, those of $n^{+}-p$ diode show that the ideality factor is 1.05 and reverse current density is 85.2pA/$cm^{2}$. The reverse currents are measured at 5V reverse bias after rapid thermal alloying for all the measurement.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.12
• /
• pp.1656-1662
• /
• 1988

Auger depth profiles of various In Ga As P/In P heterojunctions grown by liquid phase epitaxial techniques under different growth conditions such as diffusion temperature, diffusion time and dopants, have been obtained. The surface contaminations of In Ga As have been investigated. We found that the samples with Zn diffusion exhibit significant interface grading phenomena including In depletion, Ga richness and P richness at the In Ga As P/In P interface, and In outdiffusion at the surface. The main surface contamination was found to be due to carbon and oxygen species. It can be suggested that Zn gettering takes a major role in such phenomena as interface grading, in depletion, and Ga and P richness at the interface.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.982-984
• /
• 2008

Generally, the soil around railroad is contaminated by the leakage of oil during its maintenance or the operation of rolling stock. Because the railroad soil is located under ballast and is hardened with the designated strength due to safety, the characteristics of the polluted site are different. In this study, the phenomena of oil diffusion in the railroad site was investigated using 2-D reactor. The used oil was lubricant. As a result, the maximum diffusion depth of lubricant was about 9.5 cm due to its high viscosity and the hardened soil. The lubricant was diffused by gravity more than by horizontal migration. In the future, these results can be applied to develop a remediation method for the contaminated railroad soil.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.543-546
• /
• 2002

This paper discussed micro - structure of skin concrete to understand transport properties from surface and seek thickness from surface which is seriously influenced on durability. Concrete at nearer surface has high porosity relative to inner concrete. The porosity of concrete and ISAT value at region from surface to 20 mm depth is decreased with depth. On the other hand, according to the result of ASTM C 1202 with specimen thickness, critical depth which affects fast ionic penetration through interfacial transition zone (ITZ) equals 35mm and the critical depth would be directly influenced by the effects of ITZ on chloride diffusion unrelated with W/C ratio.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.91-96
• /
• 2010

SCM440 steels were nitrided using pulsed dc plasma combined with inductively coupled plasma (ICP) generated by 13.56 MHz rf power in order to enhance case hardening depth. The case hardening depth was increased with rf power. The effective case-depth with ICP at 900 watt was as 1.6 times as that nitrided without ICP. The hardening depth was also increased up to 1.45 times. The compound layers formed on top surface were dense and thin when pulsed dc plasma was combined with ICP.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.325-334
• /
• 1996

Pepper plants were flooded at 0, 5, 10 and 15cm at seedling stage under the condition of greenhouse. Treatment of flooding times are 6, 12, 24, 48 and 120 hours. The results obtained are summarized as follows. Plant height, number of leaves, shoot and root fresh weight were not recovered the flooding damages regardless of flooding time and depth. Pepper plant died in flooding depth of 5cm or more for over 48 hours. Plants in fallen leaves were found at more than 5cm depth and 6 hours of floodings. Photosynthesis and respiration rate decreased in the 5cm flooding depth or more for 24 hours. Chlorophyll content and root activity decreased for 12 hours or more at all the flooding depth. Also, diffusion resistance of stomata cell increased as increased flooding time and depth. Diseases occurred remarkably in proportion to the depth and hours of flooding treatment. It was not possible to control the desease by fungicide, also then was no effects of foliar spray of urea. Weight of fruit per plant not decrease by the 12 hours of 0cm and the 6 hours of 5cm flooding but decreased at deeper and longer flooding. Average weight of a fruit increased. The yield could not expected in the depth of 5cm or more for over 48 hours, There was significant positive correlation between all the investigated characteristics of growth and yield. There was, however, negative correlation between number of leaf and diffusion resistance of stomata.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.261-268
• /
• 2004

Corrosion of reinforcement is the main cause of damage and early failure of reinforced concrete structures. The corrosion is mainly progressed by the chloride ingress. In this paper, an experimental study is executed to investigate the effect of concrete properties and testing methods on the coefficients of chloride diffusion. Also, it is surveyed the relationship between total chloride and free chloride in concrete. According to this experiment results, W/C ratio and testing method affect chloride diffusion coefficient of concrete. As W/C ratio is increased, diffusion coefficient in concrete is also increased. Diffusion coefficient obtained by each testing method show the different values, respectively. The model equation of diffusion coefficient with W/C ratio is proposed.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.2
• /
• pp.130-138
• /
• 1996

It has been investigated that the ion nitriding effects of a STD61 steel in various time conditions of 3 to 9 hours, and the microstructure of compound and diffusion layers of the ion nitrided specimen for 6 hours and subsequently reheated for 1 hour at various temperatures of $400{\sim}800^{\circ}C$ As the nitriding time increased, the thickness of compound and diffusion layers was increased, but the hardness of surface was not considerably increased (Max Hv=1045 at 9hrs). Some of the nitrogen was denitrided out of the surfac and diffused into the core, and also the oxides ($Fe_3O_4$, $Fe_2O_3$) were formed on the surface of the specimen during reheating. The compound layer was partially decomposed at about $600^{\circ}C$ but the diffusion layer was increased up to $800^{\circ}C$. With increasing reheated temperture, the hardness of the surface was decreased, whereas the hardness depth of diffusion layer (0.25mm) was increased up to $600^{\circ}C$ more than that of ion nitrided (0.18mm). The blend-heat treated STD61 steel by ion nitriding is therefore expected to hold on the characteristics of ion nitriding up to $600^{\circ}C$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.4
• /
• pp.422-431
• /
• 2007

Polymer electrolyte membrane fuel cell(PEMFC) is very interesting power source due to high power density, simple construction and operation at low temperature. But it has problems such as high cost, improvement of performance and effect of temperature. These problems can be approached to be solved by using mathematical models which are useful tools for analysis and optimization of fuel cell performance and for heat and water management. In this paper, the present work is to develop an electrochemical model to examine the electrochemical process inside PEM fuel cell. A complete set of considerations of mass, momentum, species and charge is developed and solved numerically with proper account of electrochemical kinetics. When depth of gas channel becomes thinner, diffusion of reactant makes well into gas diffusion layer(GDL) and the performance increases. Although at low current region there is little voltage difference between experimental data of PEM fuel cell and numerical data. When the porosity size of gas diffusion layer for PEM fuel cell is bigger, oxygen diffusion occurs well and oxygen mass fraction appears high in catalyst layer.

• The Research Journal of the Costume Culture
• /
• v.26 no.2
• /
• pp.157-171
• /
• 2018

As the next generation of smartphone and tablet computers, wearable devices are currently being developed and available in market in various forms. Smart clothing is a wearable device that holds the greatest potential for future development but low in market penetration. This study was designed to identify factors that influence adoption and diffusion of smart clothing. In-depth interviews with potential consumers who were knowledgeable about and interested in smart clothing were conducted. A semantic network analysis method was used. The results showed that consumers perceived smart clothing as a garment rather than as a type of wearable device and had a positive perception of smart apparel as more convenient and advanced than functional apparel. At the same time, however, consumers had a negative perception of smart clothing as unnecessary, ugly, and injurious to health. Consumers also worried that wearing smart apparel over long periods of time would negatively impact their health. Factors affecting resistance to smart apparel included low utility, perceived risk, and lack of aesthetic completeness. Usefulness and convenience were factors that affected the acceptance of smart clothing. The innovativeness of the product was more influential than consumer innovativeness in the process of adoption and diffusion of smart clothing.