• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.119-126
• /
• 2018

In this study, In this study, the Datum Level-based hydrography surveying system and the ellipsoid-based system were analyzed to acquire more consistent depth data. For the study, the ellipsoid-based surveying for hydrography was conducted twice for the same track line. And the depth was calculated by correcting rise and fall of water level (water level change by tidal energy and other marine environmental energies) respectively by the traditional water level correction method and ellipsoidally referenced water level correction method. there is able to check that Ellipsoid-based hydrographic surveying data is more improved than Datum Level-based hydrographic surveying data in aspect of level difference phenomenon in the same area (surveying line). This result shows that if the Ellipsoid-based hydrographic surveying is performed, the sea level change (tidal energy and other marine environmental energy) of the survey area in real time could be reflected to more consistent generating bathymetric data.

• Nuclear Engineering and Technology
• /
• v.40 no.5
• /
• pp.429-438
• /
• 2008

The objective of the present study is the depth and layout optimizations of a single layer, high level radioactive waste repository in a discontinuous rock mass with special joint set arrangements. A single layer repository model, considering variations in the repository depths, pitches, and tunnel spacings, is used to analyze the thermomechanical interaction behavior. It is assumed that the repository is constructed in saturated granite with joints; the PWR spent fuel in a disposal canister is installed in a deposition drift which is then sealed with compacted bentonite; and the backfill material is filled in the repository tunnel. The decay heat generated by the high level radioactive wastes governs the thermomechanical behavior of the near field rock mass of the repository. The temperature and displacement behavior of the repository is influenced more by the pitch variations than the tunnel spacing and repository depth. However, the stress behavior is influenced more by the repository depth variations than the pitch and tunnel spacing. For the final selection of the tunnel spacing, pitch, and repository depth, other aspects such as the nuclide migration through a groundwater flow path, construction costs, operation costs, and so on should be considered.

• The Journal of the Korean dental association
• /
• v.50 no.8
• /
• pp.460-464
• /
• 2012

Periodontitis is the most prevalent noncontagious disease. Periodontal probing for measuring probing depth (PD) and clinical attachment level (CAL) has been an important diagnostic tool to determine the presence and severity of periodontal diseases. For probing reproducibility, adroit probe handling with constant force is required.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.1
• /
• pp.62-70
• /
• 1994

In order to estimate the detection range of a active SONAR system, the SONAR equation is commonly used. In this paper, an algorithm to calculate detection range in active SONAR system as function of SONAR depth and target depth is presented. For given SONAR parameters and environment, the transmission loss and background level are found, signal excess is computed. Using log-normal distribution, signal excess is converted to detection probability at each range. Then, the detection range is obtained by integrating the detection probability as function of range for each depth. The proposed algorithm have been applied to the case of omni-directional source with center frequency 30Hz for summer and winter sound profiles. It is found that the optimal search depth is the source depth since the detection range increase at source depth where the signal excess is maximized.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.12
• /
• pp.1785-1793
• /
• 2008

Fifty-four PIC barrows were used to evaluate the effects of lower dietary lysine content and energy level on carcass characteristics and meat quality in slaughter pigs. Pigs were allotted to one of three treatments by body weight with six replicate pens in each treatment. The dietary treatments for body weights of 20-50 kg, 50-80 kg and 80-90 kg were as follows, respectively: control diet (digestible energy 14.22 MJ/kg, lysine/DE 0.67 g/MJ, 0.53 g/MJ and 0.42 g/MJ); a low lysine group (digestible energy 14.22 MJ/kg, lysine/DE 0.49, 0.38 and 0.30 g/MJ); and a low lysine-low energy group or low nutrient group (digestible energy 13.11 MJ/kg, lysine/DE 0.49, 0.38 and 0.30 g/MJ). The daily weight gain, daily feed intake and feed efficiency were calculated in the overall growth period (nearly 12 weeks). Meanwhile, carcass characteristics and meat quality were evaluated at 60 and 90 kg body weight respectively. During the overall growth trial, lowering dietary lysine and nutrient level both decreased weight gain (p<0.05) and feed efficiency (p<0.01). At 60 kg body weight, decreasing dietary lysine and nutrient level noticeably decreased dressing percentage (p<0.01) and back fat depth at last rib of PIC pigs (p<0.01), but enhanced marbling scores (p<0.10), intramuscular fat content (p<0.10) and water loss rate (p<0.01) of the longissimus dorsi muscle. At 90 kg body weight, lean percentage (p<0.01) was evidently reduced by both lowering lysine content and nutrient level in the diet. However, the shoulder back fat depth (p<0.05) and marbling scores of the loin eye muscle (p<0.05) were increased; Lowering dietary nutrient level could improve back fat depth of 10th rib (p<0.01) and last rib (p<0.01), intramuscular fat content (p<0.10), redness (p<0.01) and water loss rate of the loin eye muscle (p<0.05), but decrease loin area (p<0.05). Finally, when comparing the 60 kg and 90 kg slaughter weights, it was found that the shoulder back fat depth (p<0.01, p<0.10), 6th-7th rib (p<0.01, p<0.01), 10th-rib (p<0.01, p<0.01) and last rib back fat depth (p<0.01, p<0.01) of the low lysine and low nutrient group were all obviously increased comparing with the control group. Taken together, the results showed that decreasing dietary lysine content and nutrient level increased intramuscular fat content and water loss rate of longissimus dorsi muscle; On the other hand, both lowering dietary lysine and nutrient level markedly compensated to increase back fat deposition in the later finishing period (body weight from 60 to 90 kg) in contrast to the control group.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.19-26
• /
• 2017

Concrete is a construction material with porous media and corroded steel inside affects negatively to durability and structural safety. This study aims a derivation of quantitative relationship between measured HCP (Half Cell Potential) and corrosion amount considering cover depth and W/C (water to cement) ratio. For the work, cement mortar specimens with 3 different W/C ratios and 4 different cover depths are prepared, HCPs are measured with 3 different corrosion level. HCP measurement significantly increases in the saturated condition and linear relationship is observed between corrosion level and acceleration period. With increasing corrosion level and W/C ratio, and decreasing cover depth, HCP measurement increases. Considering total corrosion level and HCP measurements, relatively low COV(Coefficient of Variation) of 0.67 is evaluated through multi-linear regression analysis, however higher COVs over 0.90 can be obtained considering level of HCP measurement. In the room condition, corrosion level can be evaluated through measured HCP in the given conditions of cover depth, W/C ratio. diameter of steel inside.

• Korean Journal of Cognitive Science
• /
• v.18 no.2
• /
• pp.193-221
• /
• 2007

This study explored the efficient hierarchical data structure of mobile interfaces. The first experiment demonstrated the effects of grouping(clear/unclear), depth level(2/3/5), and the number of items(32/64/128) on the search time and the number of errors. The results indicated that participants spent less time and made fewer errors to perform the task when the clear mobile interfaces, low depth level, and fewer items were provided. In addition, the results indicated that there were no effects of the depth level and the number of items on the search time and number of errors in clear mobile interfaces conditions. As depth level and the number of items changed, on the other hand, participants spent longer time to complete the task and made more mistakes in unclear mobile interfaces conditions. The second experiment investigated the effects of grouping(clear/unclear), the number of items(32/64/128), and spacial cues(colors/ windows/ number of cues) on search time and the number of errors in hierarchical data structures which had five depth levels. The results indicated that participants spent less time to complete the task and made less errors in a mobile interface when grouping is clear and the number of items are fewer. The results were identical with the first experiments. In addition, the main effect of spacial cues indicated that providing spacial cues via pictures and numbers can be helpful to reduce errors in search behaviors.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.173-177
• /
• 2006

From the viewpoint of coastal hydrodynamics, one of the most important effects of global warming is a sea-level rise in coastal areas. In the present study, impacts on port facilities against sea-level rise were investigated. The sea-level rise causes the increase of the water depth, and it generates variations on the wave height, buoyancy, tidal system and nearshore current system and so on. The increase of water depth gives rise to the decrease of crown height of the structure and it causes increase of wave overtopping quantity. It may flood the port zone and its facilities, and may decrease harbor tranquility. It also leads to difficulties on navigation, mooring and loading/unloading at the port. Increase in water depth also causes increase of wave height in surf zone. This high wave makes structures unstable and may cause them to collapse during storm. In addition, increase in buoyant force due to sea-level rise also makes the gravity type structures unstable. Consequently, theses variations due to sea-level rise will cause functional deterioration of port facilities. In order to protect port facilities from the functional deterioration, reinforcement plan is required such as raising the crown height and increase in block weight and so on. Hence proper estimation method for the protection cost is necessary in order to protect port facilities efficiently. Moreover response strategies and integrated coastal zone management plan is required to maintain the function of port facilities. A simple estimation of cost for breakwaters in Korea was performed in the present study.

• Safety and Health at Work
• /
• v.6 no.1
• /
• pp.18-24
• /
• 2015

Background: In 2006, three farmers died at the bottom of an agricultural shallow well where the atmosphere contained only 6% oxygen. This study aimed to document the variability of levels of oxygen and selected hazardous gases in the atmosphere of wells, and to identify ambient conditions associated with the low-oxygen situation. Methods: A cross-sectional survey, conducted in June 2007 and July 2007, measured the levels of oxygen, carbon monoxide, hydrogen sulfide, and explosive gas (percentage of lower explosive limit) at different depths of the atmosphere inside 253 wells in Kamphaengphet and Phitsanulok provinces. Ambient conditions and well use by farmers were recorded. Carbon dioxide was measured in a subset of wells. Variables independently associated with low-oxygen condition (<19.5%) were identified using multivariate logistic regression. Results: One in five agricultural shallow wells had a low-oxygen status, with oxygen concentration decreasing with increasing depth within the well. The deepest-depth oxygen reading ranged from 0.0% to 20.9%. Low levels of other hazardous gases were detected in a small number of wells. The low-oxygen status was independently associated with the depth of the atmosphere column to the water surface [odds ratio (OR) = 13.5 for 8-11 m vs. <6 m], depth of water (OR = 0.17 for 3-<8 m vs. 0-1 m), well cover (OR = 3.95), time elapsed since the last rainfall (OR = 7.44 for >2 days vs. <1 day), and location of well in sandy soil (OR = 3.72). Among 11 wells tested, carbon dioxide was detected in high concentration (>25,000 ppm) in seven wells with a low oxygen level. Conclusion: Oxygen concentrations in the wells vary widely even within a small area and decrease with increasing depth.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.233-236
• /
• 2006

This study presents a technique to quantitatively measure the corrosion level of a reinforcing bar using the infrared thermography system. The temperature-distribution of the concrete surface is monitored and the temperature change of the reinforcing bar is analysed in terms of corrosion level and concrete cover depth. The experimental results indicate that temperature increase of the reinforcing bar is significant when the corrosion level is high, which implies that the quantity of heat is strongly dependent on corrosion level. Also, as the concrete cover depth of the specimen and the atmosphere temperature increase, the temperature variation becomes small.