• Journal of Soil and Groundwater Environment
• /
• v.13 no.4
• /
• pp.22-29
• /
• 2008

To understand environmental characteristics and contamination assessment of the Namsan Park soil in Seoul, we divided the Namsan map into 33 sectors and sampled mixed soil in depth 0${\sim}$15 cm, in 5${\sim}$10 points at the sites. We analyzed soil samples collected at 21 sectors twice on May and September. The results were as follows. The hue color ranges of the Namsan soil were 2.5YR${\sim}$10YR, the value ranges were 1${\sim}$4, the water rates were 3.1${\sim}$22.3 and the Ignition losses were 3.4${\sim}$10.4%. The average concentration of Cu and Pb were determined 3.374 and 15.000 mg/kg, Cd and As showed very low level. The mean concentrations of Zn and Ni were showed 103.290 and 11.649 mg/kg and this amount is not different from the nationalwide mean in 2005. The mean pH showed 5.41. The Zn, Ni and Cd in the soil of the circular road of Namsan showed 1.33, 1.48, 1.46 times higher than the other sector of the Namsan soil. The corelation coefficient between water rate and ignition loss were 0.720 and the correlation coefficient between Cu and Pb, Cu and Zn showed 0.827, 0.694 respectively. There was weak corelationship between pH and Zn. The Uniformity coefficient (Uc) of all the survey sites was determined below 5 in the range of 1.5${\sim}$4.4.

• Journal of The Korean Association For Science Education
• /
• v.37 no.2
• /
• pp.347-358
• /
• 2017

The purpose of this study is to research on the professional development of pre-service chemistry teachers in terms of personal practical knowledge(PPK), and draw a discussion for pre-chemistry teacher education. A reflective discussion through a Community of Practice(CoP) activity has been conducted with 5 pre-service chemistry teachers studying in a college of education located in Seoul. The analysis of the results reveals that 'Subject-matter knowledge' is leaning toward massive chemical contents, 'Curriculum knowledge' is below the level of selecting, analyzing, and applying curriculum materials. 'Instruction knowledge', especially the knowledge of chemistry experiment and research, is not enough to lead secondary students' scientific experiment. 'Milieu of school knowledge' is stunted in growth for the reason of communication-deficiency between a college of education and a community, and among education- related groups. 'Self-knowledge' has been diminished not only because there is a bad influence from college classmates not wanting to be a teacher, but also a lack of communication in the chemistry-education department which can make pre-teachers' belief strong. In conclusion, it is especially needed for the chemistry-education department to strengthen pre-teachers' 'Self-knowledge' in order to develop PPK. This study suggests operating 'a professional community' that has a periodic meeting with pre-service teachers, teachers, professors, community people, education practitioners, and researchers. In addition, it would be effective for increasing pre-teachers' PPK to reconsider depth and direction of 'Subject-matter knowledge', to give an opportunity to examine curriculum materials critically and reorganize them, to improve the course of chemistry experimental subject to the way of improving pre-teachers' leadership in chemistry inquiry experiment, and to raise the quality of educational service activities.

• Journal of The Korean Association For Science Education
• /
• v.39 no.6
• /
• pp.777-790
• /
• 2019

The purpose of this study is to investigate the experience of teachers who apply Smart-technology in elementary school STEAM class and the reasons, difficulties when applying the technology and required support. Semi-structured in-depth interviews were conducted with six elementary school teachers with specialized knowledge in STEAM education who have experienced STEAM lessons several times before. The research findings are as follows: First, research participants utilized a variety of Smart-technology in STEAM class, most of which were experiential or interactive technology. Among the STEAM learning criteria, the Smart-technology in 'Creative Design' course was most often applied. Second, they adopted Smart Technology in STEAM class to encourage students to feel interested, actively participate in the class, enjoy indirect experience, and nurture interest in state-of-the-art technology. They used it to prepare for future societies and organize classes that are suitable for STEAM learning criteria. They also used Smart-technology because it was easy to use. Third, they found it difficult to find, secure, and use suitable Smart-technology when applying Smart-technology in the STEAM class. They also had trouble restructuring the curriculum. In addition, there were difficulties in using Smart-technology in the class such as lack of class hours, increased level of activity, insufficient physical environment and unexpected malfunction of Smart-technology, thus interrupted the class. After the class, it was hard to manage Smart-technology and also, there were difficulties in assessment, record, and negative awareness of surrounding people. Fourth, they mentioned that's suggesting education guidelines, develop, and distribute educational materials are required to enable 'Creative Design,' reduce educational content, provide training, secure Smart-technology equipment and provide Wi-Fi, support teacher's club and communities and create an atmosphere to emotionally support teachers in order to activate using Smart-technology in STEAM class.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.132-142
• /
• 2003

This study is performed to investigate the characteristics of the palatal morphology of the children with anterior crossbite in Hellman dental age IIIA by 3-dimensional laser scanner. Totally 40 study casts were taken; 20 were from children with crossbite and another 20 were from normal occlusion as a control. Each cast was scanned by 3 dimension laser scanner and shaped by the 3 dimension image by rapidform 2000 program(INUS, Korea). And finally it was calculated by Rhino 3D program(Rhinoceros, USA). The intercanine, intermolar cross-sectioned transverse plane and sagittal plane were measured. Due to the variations in palatal morphology, each group was standardized into 25mm, 35mm, 35mm. By sectioning standardized curves of the Palatal morphology per 1mm, the palatal depth of each point was calculated. Through these complex methods, the mean curves of the palatal morphology could be obtained and the values were statistically compared and evaluated by T-test with 95% of significance level. The results were as follows: 1. In the intercanine cross-sectioned transverse plane, the mean curve of palatal morphology of crossbite group was flatter V shape than that of control group, however, there was no statistical significance was found between two groups(P>0.05). 2. In the intermolar cross-sectioned transverse plane, the mean curve of palatal morphology of crossbite was deeper all over the area than that of control group, and the statistical significance was found in the middle area from point 8 to 21(P<0.05). 3. In the sagittal plane, the mean curve of palatal morphology of crossbite group was more deepening as approaching posteriorly than that of control group, and the statistical significance was found in all over the area(P<0.01).

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.250-257
• /
• 2015

Multi-leaf collimator (MLC) systems are frequently used to deliver photon-based radiation, and allow conformal shaping of treatment beams. Many proton beam centers currently make use of aperture and snout systems, which involve use of a snout to shape and focus the proton beam, a brass aperture to modify field shape, and an acrylic compensator to modulate depth. However, it needs a lot of time and cost of preparing treatment, therefore, we developed the manual MLC for solving this problem. This study was carried out with the intent of designing an MLC system as an alternative to an aperture block system. Radio-activation and dose due to primary proton beam leakage and the presence of secondary neutrons were taken into account during these iterations. Analytical calculations were used to study the effects of leaf material on activation. We have fabricated tray model for adoption with a wobbling snout ($30{\times}40cm^2$) system which used uniform scanning beam. We designed the manual MLC and tray and can reduce the cost and time for treatment. After leakage test of new tray, we upgrade the tray with brass and made the safety tool. First, we have tested the radio-activation with usually brass and new brass for new manual MLC. It shows similar behavior and decay trend. In addition, we have measured the leakage test of a gantry with new tray and MLC tray, while we exposed the high energy with full modulation process on film dosimetry. The radiation leakage is less than 1%. From these results, we have developed the design of the tray and upgrade for safety. Through the radio-activation behavior, we figure out the proton beam leakage level of safety, where there detects the secondary particle, including neutron. After developing new design of the tray, it will be able to reduce the time and cost of proton treatment. Finally, we have applied in clinic test with original brass aperture and manual MLC and calculated the gamma index, 99.74% between them.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.193-200
• /
• 2015

The aim of this study is to present commissioning results of the ViewRay system. We verified safety functions of the ViewRay system. For imaging system, we acquired signal to noise ratio (SNR) and image uniformity. In addition, we checked spatial integrity of the image. Couch movement accuracy and coincidence of isocenters (radiation therapy system, imaging system and virtual isocneter) was verified. Accuracy of MLC positioing was checked. We performed reference dosimetry according to American Association of Physicists in Medicine (AAPM) Task Group 51 (TG-51) in water phantom for head 1 and 3. The deviations between measurements and calculation of percent depth dose (PDD) and output factor were evaluated. Finally, we performed gamma evaluations with a total of 8 IMRT plans as an end-to-end (E2E) test of the system. Every safety system of ViewRay operated properly. The values of SNR and Uniformity met the tolerance level. Every point within 10 cm and 17.5 cm radii about the isocenter showed deviations less than 1 mm and 2 mm, respectively. The average couch movement errors in transverse (x), longitudinal (y) and vertical (z) directions were 0.2 mm, 0.1 mm and 0.2 mm, respectively. The deviations between radiation isocenter and virtual isocenter in x, y and z directions were 0 mm, 0 mm and 0.3 mm, respectively. Those between virtual isocenter and imaging isocenter were 0.6 mm, 0.5 mm and 0.2 mm, respectively. The average MLC positioning errors were less than 0.6 mm. The deviations of output, PDDs between mesured vs. BJR supplement 25, PDDs between measured and calculated and output factors of each head were less than 0.5%, 1%, 1% and 2%, respectively. For E2E test, average gamma passing rate with 3%/3 mm criterion was $99.9%{\pm}0.1%$.

• Asia pacific journal of information systems
• /
• v.19 no.1
• /
• pp.33-62
• /
• 2009

Internet computing is a disruptive IT innovation. Semantic Web can be considered as an IT innovation because the Semantic Web technology possesses the potential to reduce information overload and enable semantic integration, using capabilities such as semantics and machine-processability. How should organizations adopt the Semantic Web? What factors affect the adoption and diffusion of Semantic Web innovation? Most studies on adoption and diffusion of innovation use empirical analysis as a quantitative research methodology in the post-implementation stage. There is criticism that the positivist requiring theoretical rigor can sacrifice relevance to practice. Rapid advances in technology require studies relevant to practice. In particular, it is realistically impossible to conduct quantitative approach for factors affecting adoption of the Semantic Web because the Semantic Web is in its infancy. However, in an early stage of introduction of the Semantic Web, it is necessary to give a model and some guidelines and for adoption and diffusion of the technology innovation to practitioners and researchers. Thus, the purpose of this study is to present a model of adoption and diffusion of the Semantic Web and to offer propositions as guidelines for successful adoption through a qualitative research method including multiple case studies and in-depth interviews. The researcher conducted interviews with 15 people based on face-to face and 2 interviews by telephone and e-mail to collect data to saturate the categories. Nine interviews including 2 telephone interviews were from nine user organizations adopting the technology innovation and the others were from three supply organizations. Semi-structured interviews were used to collect data. The interviews were recorded on digital voice recorder memory and subsequently transcribed verbatim. 196 pages of transcripts were obtained from about 12 hours interviews. Triangulation of evidence was achieved by examining each organization website and various documents, such as brochures and white papers. The researcher read the transcripts several times and underlined core words, phrases, or sentences. Then, data analysis used the procedure of open coding, in which the researcher forms initial categories of information about the phenomenon being studied by segmenting information. QSR NVivo version 8.0 was used to categorize sentences including similar concepts. 47 categories derived from interview data were grouped into 21 categories from which six factors were named. Five factors affecting adoption of the Semantic Web were identified. The first factor is demand pull including requirements for improving search and integration services of the existing systems and for creating new services. Second, environmental conduciveness, reference models, uncertainty, technology maturity, potential business value, government sponsorship programs, promising prospects for technology demand, complexity and trialability affect the adoption of the Semantic Web from the perspective of technology push. Third, absorptive capacity is an important role of the adoption. Fourth, suppler's competence includes communication with and training for users, and absorptive capacity of supply organization. Fifth, over-expectance which results in the gap between user's expectation level and perceived benefits has a negative impact on the adoption of the Semantic Web. Finally, the factor including critical mass of ontology, budget. visible effects is identified as a determinant affecting routinization and infusion. The researcher suggested a model of adoption and diffusion of the Semantic Web, representing relationships between six factors and adoption/diffusion as dependent variables. Six propositions are derived from the adoption/diffusion model to offer some guidelines to practitioners and a research model to further studies. Proposition 1 : Demand pull has an influence on the adoption of the Semantic Web. Proposition 1-1 : The stronger the degree of requirements for improving existing services, the more successfully the Semantic Web is adopted. Proposition 1-2 : The stronger the degree of requirements for new services, the more successfully the Semantic Web is adopted. Proposition 2 : Technology push has an influence on the adoption of the Semantic Web. Proposition 2-1 : From the perceptive of user organizations, the technology push forces such as environmental conduciveness, reference models, potential business value, and government sponsorship programs have a positive impact on the adoption of the Semantic Web while uncertainty and lower technology maturity have a negative impact on its adoption. Proposition 2-2 : From the perceptive of suppliers, the technology push forces such as environmental conduciveness, reference models, potential business value, government sponsorship programs, and promising prospects for technology demand have a positive impact on the adoption of the Semantic Web while uncertainty, lower technology maturity, complexity and lower trialability have a negative impact on its adoption. Proposition 3 : The absorptive capacities such as organizational formal support systems, officer's or manager's competency analyzing technology characteristics, their passion or willingness, and top management support are positively associated with successful adoption of the Semantic Web innovation from the perceptive of user organizations. Proposition 4 : Supplier's competence has a positive impact on the absorptive capacities of user organizations and technology push forces. Proposition 5 : The greater the gap of expectation between users and suppliers, the later the Semantic Web is adopted. Proposition 6 : The post-adoption activities such as budget allocation, reaching critical mass, and sharing ontology to offer sustainable services are positively associated with successful routinization and infusion of the Semantic Web innovation from the perceptive of user organizations.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.208-216
• /
• 2011

The purpose of this study was to find soil-amendment materials those support the growth of Kentucky bluegrass and reduce salt accumulation at the sand based growing media in saline conditions. Rootzone profile in columns consisted of 20 cm of top soil, 20 cm coarse sand as capillary rise interruption layer and 10 cm reclaimed paddy soil as the base of the profile. Top soils were mixtures of dredged sand (DS) and amendment with compositions of 90% sand + 10% peat moss (SP), 80% sand + 10% soil + 10% bottom ash (SSoBa), 80% sand + 20% soil (SSo), 90% sand + 5% peat + 5% zeolite (SPZ), and 80% sand + 20% bottom ash (SBa). The top soil mixtures of DS and amendments were treated with and without gypsum (Gp). The columns were soaked into 5 cm depth saline water reservoir with the salinity level of $3-5dSm^{-1}$. Irrigation of $2dSm^{-1}$ saline water with rate of $5.7mm\;day^{-1}$ was applied by 3 day interval. Application of zeolite decreased SAR, application of gypsum decreased ECe of the sand amended by peat + zeolite and decreased the SAR of sand amended by bottom ash. The SP and SSoGp resulted in higher clipping dry weight of Kentucky bluegrass. The SSoGp and SPZGp showed longer root lengths. The SP and SBaGp showed higher visual quality. Addition of gypsum to soil and bottom ash treatments resulted in the increased shoot growth, whereas additional gypsum to the treatments of peat, soil and zeolite increased the root growth of Kentucky bluegrass.

• Geophysics and Geophysical Exploration
• /
• v.7 no.3
• /
• pp.164-173
• /
• 2004

To delineate geothermal water movement at the Pohang geothermal development site, Self-Potential (SP) survey and monitoring were carried out during pumping tests. Before drilling, background SP data have been gathered to figure out overall potential distribution of the site. The pumping test was performed in two separate periods: 24 hours in December 2003 and 72 hours in March 2004. SP monitoring started several days before the pumping tests with a 128-channel automatic recording system. The background SP survey showed a clear positive anomaly at the northern part of the boreholes, which may be interpreted as an up-flow Bone of the deep geothermal water due to electrokinetic potential generated by hydrothermal circulation. The first and second SP monitoring during the pumping tests performed to figure out the fluid flow in the geothermal reservoir but it was not easy to see clear variations of SP due to pumping and pumping stop. Since the area is covered by some 360 m-thick tertiary sediments with very low electrical resistivity (less than 10 ohm-m), the electrokinetic potential due to deep groundwater flow resulted in being seriously attenuated on the surface. However, when we compared the variation of SP with that of groundwater level and temperature of pumping water, we could identify some areas responsible to the pumping. Dominant SP changes are observed in the south-west part of the boreholes during both the preliminary and long-term pumping periods, where 3-D magnetotelluric survey showed low-resistivity anomaly at the depth of $600m\~1,000m$. Overall analysis suggests that there exist hydraulic connection through the southwestern part to the pumping well.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.