• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.636-641
• /
• 2002

Optimum extraction condition and clarification process were investigated to manufacture liquid extract tea using Phellinus linteus. Carbohydrates content in the raw Phellinus linteus was 80.9%. Major minerals were K, Ca, Fe and Na, but vitamin B$_1$, B$_2$, and C were not detected. The best extraction condition was 5% raw material at 10$0^{\circ}C$ within 3 hr. To clarify the extract, three methods of filtration with depth filter pad, centrifugation and addition of several filter aids were studied. Filtration with depth filter pad and centrifugation were highly effective on the clarification and the changes in the turbidity for 7 weeks at 4$0^{\circ}C$ were not occurred. The optimum clarification condition was centrifugation above 6,000 rpm or filtration with 8 ${\mu}{\textrm}{m}$ depth filter pad.

• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.565-571
• /
• 2012

During depth data acquisition and transmission, the quality of depth maps is usually degraded by physical noise and coding error. In this paper, a new joint bilateral filter based on the common distance transform is presented to enhance the low-quality depth map. The proposed method determines the amount of exploitable color data according to distance transform values of depth and color pixels. Consequently, the proposed filter minimizes noise in the depth map while suppressing visual artifacts of joint bilateral filtering. Experimental results show that our method outperforms other conventional methods in terms of noise reduction and visual artifact suppression.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.537-545
• /
• 2016

In order to cope with the new and strict government regulations for turbid water discharge from construction sites, this study tested whether synthetic fiber filters can replace conventional best management practices. The filter efficiency was about 10 to 60% with a varying filter depth of 5 to 15cm, presuming extreme storm flow conditions to be in the range of 800 to 1500m/day of filtration rates. Fiber filter acts exactly like a granular filter, i.e. the separation efficiency is directly and inversely proportional to filter depth and rate, respectively. Based on the operational data, we suggested the Log-Log design relationship, which can be used to determine the filter depth and area. Compared to the widely used gravel filter which treats the turbid water at the construction site, about 20% higher efficiency was obtained under similar operating conditions. Cleaning the filter through a simple hand-washing method at the time of break-through, achieved about 90% soil recovery.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.3
• /
• pp.65-69
• /
• 2010

The stereoscopic vision system is the algorithm to obtain the depth of target object of stereo vision image. This paper presents an efficient disparity matching method using nagao filter, octree color quantization and dynamic programming algorithm. we describe methods for performing color quantization on full color RGB images, using an octree data structure. This method has the advantage of saving a lot of data. We propose a preprocessing stereo matching method based on Nagao-filter algorithm using color information. using the nagao filter, we could obtain effective depth map and using the octree color quantization, we could reduce the time of computation.

• Journal of Korean Society on Water Environment
• /
• v.32 no.1
• /
• pp.36-45
• /
• 2016

Sand filters are widely used in infiltration systems to manage polluted urban runoff. Clogging, which is mainly caused by the deposition of sediments on the filter media, reduces the filter system's infiltration capacity, which further limits its lifespan and function. The physical, chemical and biological clogging characteristics of sand filter, therefore, need to be known for effective design and maintenance. Physical clogging behavior and variations in the characteristics of sand filters according to different media depths are examined in this paper. The variations were observed from laboratory column infiltration tests conducted in a vertical flow and fluctuating head condition. It can be seen that an increase in filter media depth results in a high sediment removal performance; however, it leads to a shorter lifespan due to clogging. In the choice of filter media depth to be used in field applications, therefore, the purpose of facilities as well as maintenance costs need to be considered. At all filter media depth configurations, premature clogging occurred because sediments of 100~250 μm clogged the top 15% of filter media depth. Thus, scrapping the top 15% of filter media may be suggested as the first operational maintenance process for the infiltration system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.3
• /
• pp.361-369
• /
• 2004

A metal fiber bed has seldom been applied to the practical filtration process despite its excellent mechanical and chemical stability. The filter-bed used in this work was highly porous with open structure, of which apparent porosity was 80 ∼ 90%. Although pressure loss across the filter-bed was very low, separation efficiency was found to be quite high. This paper focuses on the basic filtration mechanisms of a metal filter-bed and a thin ceramic filter from fly ash for reference. The experimental parameters were face velocity, dust loading and porosity of filter-bed. Pressure drop increased with increasing face velocity and dust feeding load for both filters. It also showed that dust particles deposited in the deep flow path, finally resulting in clogging the pore channels. It thereby indicates that the dominating mechanism of the metal filter-bed would be depth filtration. Meanwhile, the thin fly ash composite filters trapped the aerated dust mainly on the surface of the filter medium, so that the instantaneously formed dust layer might cause a steep increase of pressure drop across the filtration system.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.507-513
• /
• 2020

The median filter that is used in various fields requiring image processing converts to a median value of pixels belonging to a radius r for all pixels in the image of n×m size. For 8-bit depth images, an O(nm) time algorithm exists but for over 16-bit depth images, there is an O(nmlog²r) time algorithm of Gil and Werman. In this paper, we propose an efficient median filter algorithm that works for more than 16-bit depth images. The time complexity of our algorithm is the same as that of Gil and Werman, but theoretical analysis and experimental results show that ours is efficient than above two times.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.695-703
• /
• 2011

The number of adders and critical paths in a multiplier block of a multiple constant multiplication based implementation of a finite impulse response (FIR) filter can be minimized through common subexpression elimination (CSE) techniques. A two-bit common subexpression (CS) can be located recursively in a noncanonic sign digit (CSD) representation of the filter coefficients. An efficient algorithm is presented in this paper to improve the elimination of a CS from the multiplier block of an FIR filter so that it can be realized with fewer adders and low logical depth as compared to the existing CSE methods in the literature. Vinod and others claimed the highest reduction in the number of logical operators (LOs) without increasing the logic depth (LD) requirement. Using the design examples given by Vinod and others, we compare the average reduction in LOs and LDs achieved by our algorithm. Our algorithm shows average LO improvements of 30.8%, 5.5%, and 22.5% with a comparative LD requirement over that of Vinod and others for three design examples. Improvement increases as the filter order increases, and for the highest filter order and lowest coefficient width, the LO improvements are 70.3%, 75.3%, and 72.2% for the three design examples.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.545-554
• /
• 2004

In this paper, we propose an efficient design method for area optimization in a digital filter. The conventional methods to reduce the number of adders in a filter have the problem of a long critical path delay caused by the deep logic depth of the filter due to adder sharing. Furthermore, there is such a disadvantage that they use the transposed direct form (TDF) filter which needs more registers than those of the direct form (DF) filter. In this paper, we present a hybrid structure of a TDF and DF based on the flattened coefficients method so that it can reduce the number of flip-flops and full-adders without additional critical path delay. We also propose a resource sharing method and sharing-pattern searching algorithm to reduce the number of adders without deepening the logic depth. Simulation results show that the proposed structure can save the number of adders and registers by 22 and 26%, respectively, compared to the best one used in the past.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3122-3122
• /
• 2001

Documented quality control plays a vital role I the production of technical “Depth filter” sheets used in industries such as Beverage and pharmaceutical. Depth filter sheets which can be up to several millimeters thick are stacker in plate and frame filter systems. They are the core of stainless steel filter systems which can be up to several meters high. FT-NIR Spectroscopy has many potential applications in the whole production line of filter sheets. Raw materials such as different types of cellulose pads, white powdery fillers (e.g. Kieelgur, Perlite) or liquid chemicals such as wet-strength agents we, with the help of NIR, easy to identify. NIR can also determine physical parameters such as particle size, essential for the filtration behavior. FT-NIR can be used for the quality parameters of the final product. Moisture and permeability can be determined, and with the help of the speed of this NIR method it is possible to correct possible faults quickly in the production process. Waste production can be minimized which is good for both the product profitability and the environment. Further tests have shown that it is also possible to use NIR on-line in the production area, to check the concentrations and the homogeneity of the paper suspension consisting of cellulose fibres, fillers and additives.