• International Journal of Ocean System Engineering
• /
• 제1권4호
• /
• pp.192-197
• /
• 2011

This paper describes the mathematical modeling, control algorithm, system design, hardware implementation and experimental test of a Manta-type Unmanned Underwater Vehicle (MUUV). The vehicle has one thruster for longitudinal propulsion, one rudder for heading angle control and two elevators for depth control. It is equipped with a pressure sensor for measuring water depth and Doppler Velocity Log for measuring position and angle. The vehicle is controlled by an on-board PC, which runs with the Windows XP operating system. The dynamic model of 6DOF is derived including the hydrodynamic forces and moments acting on the vehicle, while the hydrodynamic coefficients related to the forces and moments are obtained from experiments or estimated numerically. We also utilized the values obtained from PMM (Planar Motion Mechanism) tests found in the previous publications for numerical simulations. Various controllers such as PID, Sliding mode, Fuzzy and $H{\infty}$ are designed for depth and heading angle control in order to compare the performance of each controller based on simulation. In addition, experimental tests are carried out in a towing tank for depth keeping and heading angle tracking.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.306-313
• /
• 2022

Most submarines use the cross-plane, which is convenient and inexpensive, but the number of submarines equipped with an X-plane is increasing recently. This study focuses on designing the control system of the X-plane submarine with various control methods and analyzing the effect of each controller. First, a maneuvering simulation environment for a subjected submarine is established. The dynamics and the operating range of control surfaces are considered. Second, a depth and heading control system of the submarine, which can be divided into three parts, is designed: guidance, controller, and control allocation. The guidance system generates a smooth desired depth and heading. The controller is designed using Proportional-Integral-Differential (PID), Linear Quadratic Regulator (LQR), and H-infinity (H∞) control methods. A linear control allocation method is used to distribute control moment calculated by the controller to the control surfaces. Finally, the designed control system is applied to a subjected X-plane submarine, and a depth and heading control simulations are performed. Each control method is compared and analyzed under various simulation conditions.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.132-137
• /
• 2014

In this paper, An LQR controller is proposed for way-point tracking of AUV (Autonomous Underwater Vehicle). The LQR controller aims at tracking a series of way-points which operator registers arbitrarily in advance. It consists of a depth controller and a steering controller and AUV's surge speed is assumed varying to consider the dynamic environment of the underwater. In order to show the performance, a conventional state feedback controller is compared with the proposed controller by the simulation using Matlab/Simulink. The parameters of AUV developed by the author's laboratory are used. In the simulation, we verify that the LQR controller can track all the way-points within 1 m error range under the varying surge speed, which proves the robustness of the LQR controller.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.96-106
• /
• 2001

As the drilling depth increases, the cutting torque increases and fluctuates, which can lead to the machine tool vibration, severe tool wear, and catastrophic tool breakage. Hence, cutting torque control is very important to improve productivity in drilling. In this paper, a PID controller was designed to control the drilling torque. The plant including the feed drive system, cutting process and spindle drive system was modeled for controller design. The Ziegler-Nichols method was used to determine the controller gain and control action times and the root locus plot was used to tune the controller gain for a certain cutting condition. Also, suggested was a simple method to obtain the tuned controller gain for an arbitrary cutting condition not using the Ziegler-Nichols method and the root locus plot. The performance of the designed controller and the effect of controller gain tuning were verified from experiments.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.21-28
• /
• 2010

본 논문에서는 만타형상 무인잠수정(Manta-type unmanned underwater test vehicle)의 운동성능과 제어기설계에 대한 성능을 해석하기 위한 수학모델을 정립하여 시뮬레이션 프로그램을 개발하였다. 6자유도 운동방정식을 이용하여 Matlab/Simulink로 시뮬레이션 프로그램을 구성하였다. 개발된 시뮬레이션 프로그램을 이용하여 만타형상 무인잠수정의 동역학적 운동성능을 해석하였으며, 무인잠수정의 제어성능을 해석하기 위하여 PID(비례-미분-적분)제어기와 슬라이딩모드(Sliding mode)제어기를 설계하여 만타형상 무인잠수정의 제어성능을 해석하였다. 설계된 제어기는 무인잠수정의 수심제어(Depth control)와 방향제어(Heading control)에 사용되었다. 설계된 제어기의 성능을 확인하기 위하여 미해군 대학원의 AUV II와 비교하였다. 설계된 수심제어기와 방향제어기를 이용하여 만타형 무인잠수정의 설계목표에 부합하는 항해제어 시뮬레이션을 실시하였다.

• 제어로봇시스템학회논문지
• /
• 제17권12호
• /
• pp.1266-1272
• /
• 2011

For way-point tracking of an autonomous underwater vehicle, a state feedback controller was designed by using pole placement scheme in discrete time domain. In the controller, 4 state variables were used for regulating the depth of the vehicle in z direction, and 3 state variables, for steering the vehicle in xy plane. Assuming constant speed of AUV, we simplified the design of the way-point tracking system. The proposed controller was simulated by MATLAB/Simulink using 6 degree-of-freedom nonlinear model and its performance of way point tracking was shown to be fulfilled within 1 m, nevertheless the proposed controller is quite simple and easy to implement compared to sliding mode controller.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.320-325
• /
• 1998

Underwater robotic vehicles (URVs) have been an important tool for various underwater tasks because they have greater speed, endurance, depth capability, and safety than human divers. As the use of such vehicles increases, the vehicle control system becomes one of the most critical subsytems to increase autonomy of the vehicle. The vehicle dynamics are nonlinear and their hydrodynamic coefficients are often difficult to estimate accurately. In this paper a new type of fuzzy model-based controller based on Takagi-Sugeno-Kang fuzzy model is designed and applied to the control of of an underwater robotic vehicle. The proposed fuzzy controller : 1) is a nonlinear controller, but a linear state feedback controller in the consequent of each local fuzzy control rule ; 2) can guarantee the stability of the closed-loop fuzzy system ; 3) is relatively easy to implement. Its good performance as well as its robustness to the change of parameters have been shown and compared with the re ults of conventional linear controller by simulation.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.351-354
• /
• 2006

In underwater environment, the control of AUV is difficult, because of the existence of parameter uncertainties and disturbances as well as highly nonlinear and coupled system dynamics. The requirement for the simple and robust controller which works satisfactorily in those dynamical uncertainties, call for a design using the PD or sliding mode controller. The PD controller is very popular controller in the industrial field and the sliding mode controller has been used successfully for the AUV controller design. In this paper, the two controllers arc designed for ISiMI(Integrated Submergible Intelligent Mission Implementation) AUV and the performances are compared by numerical simulation under the modeling uncertainty and disturbances. The design process of PD and sliding mode controller for ISiMI AUV and simulation results are included to compare the performances of the two controllers.

• Ocean Systems Engineering
• /
• 제3권3호
• /
• pp.237-255
• /
• 2013

In many applications, Remotely Operated Vehicles (ROVs) are required to be capable of course keeping, depth keeping, and height keeping. The ROV must be able to resist time-variant external forces and moments or frequent manipulate changes in some specified circumstances, which require the control system meets high precision, fast response, and good robustness. This study introduces a Fuzzy-Incomplete Derivative Ahead-PID (FIDA-PID) control system for a 500-meter ROV with four degrees of freedom (DOFs) to achieve course, depth, and height keeping. In the FIDA-PID control system, a Fuzzy Gain Scheduling Controller (FGSC) is designed on the basis of the incomplete derivative ahead PID control system to make the controller suitable for various situations. The parameters in the fuzzy scheme are optimized via many cycles of trial-and-error in a 10-meter-deep water tank. Significant improvements have been observed through simulation and experimental results within 4-DOFs.

• Journal of Welding and Joining
• /
• 제12권1호
• /
• pp.59-72
• /
• 1994

This paper presents an on-line quality monitoring and control method to obtain a uniform weld quality in gas metal arc welding (GMAW) processes. The geometrical parameters of the weld pool such as the top bead width and the penetration depth plus half back width are utilized to assess the integrity of the weld quality. Since a good quality weld is characterized by a relatively high depth-to-width ratio in its dimensions, the second geometrical parameter is regulated to a desired one. The monitoring variables are the surface temperatures measured at various points on the top surface of the weldment which are strongly related to the formation of the weld pool The relationship between the measured temperatures and the weld pool size is implemented on the multilayer perceptrons which are powerful for realization of complex mapping characteristics through training by samples. For on-line quality monitoring and control, it is prerequisite to estimate the weld pool sizes in the region of transient states. For this purpose, the time history of the surface temperatures is used as the input to the neural estimator. The control purpose is to obtain a uniform weld quality. In this research, the weld pool size is directly regulated to a desired one. The proposed controller is composed of a neural pool size estimator, a neural feedforward controller and a conventional feedback controller. The pool size estimator predicts the weld pool size under growing. The feedforward controller compensates for the nonlinear characteristics of the welding process. A series of simulation studies shows that the proposed control method improves the overall system response in the presence of changes in torch travel speed during GMA welding and guarantees the uniform weld quality.